NOV water treatment mixers
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Engine power: 2 kW - 300 kW
Capacity: 75 l - 25,000 l
Flow: 2 m³/h - 1,000 m³/h
... WAH Continuous Horizontal Single Shaft Mixers consist of a cylindrical mixing drum vessel with an inlet at one end of the mixing drum, an outlet at the opposite end and a venting spout, ...
Engine power: 2 kW - 300 kW
Capacity: 10 l - 20,000 l
Empty weight: 240 kg - 13,650 kg
... Batch-Type Single Shaft Mixer is the ideal machine to obtain highest quality mixtures in perfectly reproducible batches. In the last three decades MAP has supplied thousands of mixers to a large variety ...
Engine power: 2.2 kW - 22 kW
Flow: 3 m³/h - 70 m³/h
Empty weight: 400 kg - 1,235 kg
... Twin Shaft Paddle Mixer (MESC-UM as conditioner with liquid injection) is among the most efficient yet economic mixer types when it comes to conditioning dust or inerting sludge. MESC-type ...
Engine power: 1.3 kW - 10 kW
Empty weight: 42 kg - 268 kg
Horizontal submersible mixer with self-cleaning ECB propeller, close-coupled design, direct drive. ATEX-compliant version available. Main Applications Mixing Homogenisation Sludge ...
Engine power: 0.18 kW - 1.5 kW
Empty weight: 17 kg - 60 kg
Slow mixers, used in water treatment, on little-medium tank max 10 m3 of capacity. Impeller with 4 inclined blades. The shaft of the mixer is directly key coupled with ...
Engine power: 0.37 kW - 3 kW
Empty weight: 24 kg - 190 kg
Slow mixers fitted whit gear-box coupled to the shaft power. Shaft available in Aisi 304-316 or sheathed rubber. Impellers: Turbine type or special profile. These agitators are particularly suitable for ...
Zenit Mixers high-efficiency mixing systems ---------
ZMR MIXERS Reduction gears ----------------------------
... kW with 4 or 6 poles; units have planetary reduction gear. The large propeller rotating at low rpm allows a large mass of water to be kept in motion at low speed. They are mainly used in oxidation and denitrification ...
Capacity: 10 m³ - 100 m³
... . PMS mixing element - Standard screw, helical or spiral shaped mixing element. (comparable to Kenics design) - For static mixers with a diameter of up to approx. 160 mm - Suitable ...
PRIMIX B.V.
... characteristics. PMQ mixing element - Quatro shaped mixing element design - Performances equal to PMS - For static mixers with a diameter of approx. 160 mm to infinity - Suitable ...
PRIMIX B.V.
... characteristics. PMX mixing element - X-crossed type mixing element design - Suitable for static mixers of all sizes - Relative high pressure drop and not totally free from blind ...
PRIMIX B.V.
... including food, beverage, pharmaceutical, cosmetic, chemical/coatings, and wastewater treatment. Ideal for high viscosities up to up to 25,000 mPa*s, the Rapidex is perfect for mixing ...
SB Side Entry Agitators offer the same ruggedness, dependability, and simplicity of design found in our other high-quality turbine agitators and mixers. The SB agitator ...
NOV Inc.
The Model 20 HT/GT agitators are designed for a wide range of service in the chemical, pharmaceutical, ethanol and biofuels, water and wastewater, Flue Gas Desulfurization, power and other general process ...
NOV Inc.
HT Turbine Agitators have earned a worldwide reputation for long life, flexibility and ruggedness. As a result, they are the preferred agitators of many industries for harsh, demanding environments where ...
NOV Inc.
Plastic Jerrycan Mixer (25 Litre, 8 Containers) DME01-PJC-230V-25L-8 Designed to allow batch mixing of 25 litre containers commonly found in industrial environments. Simply load eight plastic jerrycans ...
... homogenisations and agitation of mixtures thanks to the high rotational speed of the drive element. MD and MDN agitators are mainly used in water treatment, but also in the food industry.
Engine power: 18.5 kW - 400 kW
Capacity: min 20.0 m³
... industrial agitators are made for bigger volumes capacity and are high-performance and size equipment. They offer trustful execution in demanding applications with extreme conditions, such as mineral processing and recovery, ...
Engine power: 3.7 kW - 18.7 kW
Capacity: 5 m³ - 20 m³
Inter RT(N) industrial polyvalent mixer is versatile equipment for diverse applications and industries. Offers a high energy performance and elevated mixing efficiency in 5 to 20 m³ deposits. It is ...
It has a high mixing capacity since it comes with a double internal mixing system.
Engine power: 1.5 kW - 45 kW
Capacity: 0.1 m³ - 30 m³
Empty weight: 250 kg - 12,000 kg
Conical Mixer with Retractable Rotor The screw agitator pull out for cleaning is an ideal design for hygienic mixing environment, access mixing chamber and reduce ...
... traditional batch type mixer, continuous mixer provide a more economical alternation for big capacity to meet process requirement. The weighing, loading, mixing and discharge steps finish ...
... chemicals and dilution water into paper stock. Water and Waste Treatment - Flash-mix water treating chemicals into wastewater stream.
LIGHTNIN
... stand-alone units, Series 45 mixers eliminate the need for tanks, agitators, moving parts and motors. Installed as part of tank/mixer system, Series 45 Mixers cost-effectively increase ...
LIGHTNIN
Engine power: 0.15 kW
... applications. They have an integrated digital control and feedback system that allows the user to precisely and easily control the mixing process. This coupled with Lightnin Impeller configuration knowhow, produces consistent ...
LIGHTNIN
... and length of the mixer vary according to the mixing task. The challenge confronting manufacturers is to offer an efficient, energy saving mixer for every mixing application. Fluitec ...
Static mixers can significantly reduce the time required for mixing processes if the flow in the tube is turbulent. Special mixing elements are used here to form the vortex. Mixing ...
Insoluble media can be easily dispersed or contacted with the help of static mixers. Static mixers are ideal for washing, reaction and mass transfer processes. They can be designed and built for both ...
Engine power: 110, 30 kW
... Maintenance Top Entry Mixers are the most common industrial agitators usually used on all process industries. ZUCCHETTI Top Entry Industrial Mixers can be tailored to every customer ...
Engine power: 55 kW
... Maintenance ZUCCHETTI Fixed Side Entry Mixers are usually installed at an angle of 10 degrees to the left of the tank axis. ZUCCHETTI Swivel Side Entry Mixers are equipped with a special device which ...
Agitators with a flange to be clamped at the top of tanks, provided with a direct drive or gear drive depending on the product requirements. These agitators can be assembled with electric, pneumatic ...
AGITASER
Engine power: 58 kW
Flow: 6,200 m³/h
... design. Applications: The mixers are designed to circulate in egg-shaped, conical cylindrical or cylindrical digesters causing an optimum mixing in both directions and a uniform heating of the sludge. ...
... shaft seals Guide bar systems for any tank Safe, convenient lifting equipment Designed for high reliability Flygt low-speed mixers feature several components that contribute to reliable operation and reduced energy costs, ...
FLYGT
... various chemical treatment processes. Compared with the traditional ultrasonic vibration plate, it has a service life of more than 1.5 times. The circular tube design is flexible and easy to install. Basically ensure ...
... applications common in water treatment, desalination plants, and chemical processing, the UltraTab delivers a high degree of mixing in a compact space. Principle of operation Turbulent ...
... top-mounted agitator is suitable for atmospheric and pressurized tanks and comes in a range of sizes. The modular design and sizing options means you won’t have to invest more than needed and can look forward to optimal ...
Capacity: 1,860 l
CMR HORIZONTAL SUBMERSIBLE MIXERS WITH GEAR Horizontal submersible mixers with epicyclical gear between electric motor and propeller. For applications in nitrification/de-nitrification, sludge ...
Engine power: 0.3 kW - 7.5 kW
Capacity: 0.5 m³ - 400 m³
Flow: 32 m³/h - 14,868 m³/h
... motor driven mixer available with a variety of marine impellers and mounting options. The VRP model is a gearmotor driven mixer using a pitch blade turbine (PBT) impeller. An ideal mixer ...
Milton Roy
Before entering the clarifier, the waste water are mixed with a linear static mixer or in reaction tanks, in order to facilitate the reaction of the chemicals.
Engine power: 110 kW
Capacity: 7.4 l
... homogenization and dispersing of powder and liquid materials. The dispersing disc and stirring paddle realize revolution and rotation, and the speed can be adjusted by the frequency converter. The special mixing ...
ONGOAL TECHNOLOGY CO., LTD.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining