OMAL air valves

163 companies | 472 products
needle valve
needle valve
NV..-.-..-..

DN: 0 mm - 1.5 mm
Pressure: 0 bar - 34.7 bar

... Orifice: Standard Needle: 0” to 0.032” (0-0.8mm). About 0-1 SCFM air flow at 50psig. High Resolution Needle: 0″ to 0.032″ (0-0.8mm). About 0-1 SCFM air flow at 50 psig. This configuration ...

See the other products
Beswick Engineering Co, Inc.
slide valve
slide valve
MSV-..-.

DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar

The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve ...

See the other products
Beswick Engineering Co, Inc.
ball valve
ball valve
MBV-1010.-.

DN: 1.78 mm
Pressure: 500 psi

Beswick’s miniature ball valve is an excellent choice for applications requiring a compact on/off valve. This design offers small size, light weight, and non-restricted flow. Approximate Weight: About ...

See the other products
Beswick Engineering Co, Inc.
piston valve
piston valve
AG series

Temperature: -20 °C - 40 °C

Vacuum Valves, 3 Channels, AG Series . Connection on the vacuum network . Electric control . Voltage: 12 VDC / 24 VDC ou 24 VAC / 110 VAC / 220 VAC . NO or NC for the vacuum or compressed air ...

pilot valve
pilot valve
F-5700 series

DN: 0.063, 0.125 in
Pressure: 0.5 psi - 100 psi
Temperature: 40 °F - 120 °F

... and changes the pneumatic state. The signal pressure and pneumatic circuit are completely isolated from each other. The pneumatic circuit is normally open, which means the supply ...

See the other products
AIR Logic
pilot valve
pilot valve
F-5800 series

DN: 0.063, 0.125 in
Pressure: 0.5 psi - 100 psi
Temperature: 40 °F - 120 °F

... moves and changes the pneumatic state. The signal pressure and pneumatic circuit are completely isolated from each other. The pneumatic circuit is normally closed, which means ...

See the other products
AIR Logic
pilot valve
pilot valve
V-5700 series

DN: 0.625, 0.125 in
Pressure: 22 psi - 116 psi
Temperature: 40 °F - 120 °F

... and changes the pneumatic state. The signal pressure and pneumatic circuit are completely isolated from each other. The pneumatic circuit is normally open, which means the supply ...

See the other products
AIR Logic
pneumatically-operated valve
pneumatically-operated valve
72 series

DN: 2 mm
Pressure: 0 bar - 12 bar
Temperature: -10 °C - 60 °C

... Series 72 features a micro air valve specially designed as a small signal element for mounting in confined areas. It provides users with a minimum activating force, large nominal width, and smallest ...

pneumatically-operated valve
pneumatically-operated valve

DN: 2 mm
Pressure: 0 bar - 12 bar
Temperature: -10 °C - 60 °C

The Khuke micro air valve is specially engineered to be mounted in tight spaces and to serve as a small signal element. It is attached to items with large nominal width and slight dimensions. This ...

pneumatic valve
pneumatic valve
DM

Pressure: 400 bar
Temperature: -30 °C - 80 °C

Modular metering valves for dual-line Air-Oil system consist of two main parts: Base and metering valve. Base and metering valves are made of zinc-plated steel and are ...

needle valve
needle valve
VB BARSTOCK

DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C

... up to 60 SLPM (air) or 3.5 LPM (water) Valves are offered in straight (T) and 90 degree (L) flow patterns. All valves are supplied with 1/8” FNPT inlet and outlet ports. Valve ...

See the other products
Aalborg Instruments
dosing valve
dosing valve
VT

DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °F - 150 °F

... the device. The PTFE needle valves are suitable for laboratory and industrial applications. It regulates corrosive gases and liquids for high pressure applications. These valves may also be utilized ...

See the other products
Aalborg Instruments
PTFE valve
PTFE valve
VT

DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °C - 66 °C

... incisive gases. It is compatible for the utilization with MVT™ PTFE Precision Needle Valves. It can operate components within the volumetric range of 30 SLPM for air and 1.8 LPM for ...

See the other products
Aalborg Instruments
diaphragm valve
diaphragm valve
650 BioStar

DN: 4 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 100 °C

The GEMÜ 650 BioStar 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. All metallic actuator components ...

piston valve
piston valve
1112-22-EPB/1NC1

DN: 0.8 mm
Pressure: 0 MPa - 0.5 MPa

... response, Application - 1. Resistant to ink and other cleaning agents, mainly used in printing industry 2. Suitable for air, ink, organic solvent and other applications requiring high speed response.

Iris® valve
Iris® valve
IBS

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment ...

electrically-actuated valve
electrically-actuated valve

Pressure: 0 bar - 36 bar
Temperature: -40 °C - 125 °C

For air purging in system like DPF system, SCR system and also can be used as ON/OFF valve for controlling gaseous media.

flow control valve
flow control valve
DRV series

DN: 6, 8, 4 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 80 °C

... CONTROL VALVES - WITH SWIVEL JOINT ► Configurable flow control valves for regulating the exhaust air ► Optimal for regulating the speeds during piston movements ► Angled version FLOW ...

pressure-control valve
pressure-control valve
DSV series

DN: 7, 4 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

PRESSURE SAFETY VALVE ► For maintaining the position of a double-acting cylinder if the operating pressure drops ► The valve consists of 2 check valves that are unlocked pneumatically

shut-off valve
shut-off valve

DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C

... electric or pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas ...

manual valve
manual valve
PV5, GMF series

DN: 100 mm - 160 mm

The PV5G/PV5 Series ISO valves are pilot operated type 5-port valves in compliance with the ISO standards which regulate international valve mounting dimensions.Suitable for operating ...

See the other products
CKD
piston valve
piston valve
MV45 series

Pressure: 10 bar
Temperature: -5 °C - 70 °C

... shortage. DATA SHEET Recommended tubings: accûrding to the fitting connected to the valve. Application field: pneumatic installations fed with filtered, lubricated air.

See the other products
C.Matic S.p.A.
slide valve
slide valve
MV27 series

DN: 0.125 in - 0.75 in
Temperature: -10 °C - 70 °C
Flow rate: 310 l/min - 6,300 l/min

This valve can easily vent the circuit in case of an air supply failure. If assembled on the cylinder port, it increases the cylinder speed. DATASHEET Recommended tubings: according to the fitting ...

See the other products
C.Matic S.p.A.
slide valve
slide valve
MV47 series

DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C

... installée! in a pneumatic circuit, the pressure control sets the working pressure of ail the connected components. The pressure adjustment will be thereby kept steatfy for a long time. h can also be used as an economuer ...

See the other products
C.Matic S.p.A.
ball valve
ball valve
DA

DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C

... monitor and adjust the valve position as needed. Fluid Flow: When the engine opens the valve, fluid can flow through the valve opening. The size of the opening can be adjusted continuously ...

flow regulator valve
flow regulator valve
JK series

DN: 4, 6, 8 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C

Orifice Flow Controller Preset Flow Control Valve (Tamper-Proof) preset flow control valve makes constant-flow in one direction and unrestricted flow in the opposite by an orifice restrictor. It is best ...

See the other products
NIHON PISCO CO., Ltd.
flow regulator valve
flow regulator valve
JSD series

DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C

It prevents unnecessary manual adjustments during the operations. Use a slot screwdriver to adjust the needle (speed adjustment). Design without an external needle for speed adjustment. Approx. 2/3 height of the conventional Speed ...

See the other products
NIHON PISCO CO., Ltd.
push-to-lock valve
push-to-lock valve
RV series

DN: 8, 4, 6 mm
Pressure: 0 MPa - 1 MPa
Temperature: 0 °C - 60 °C

... relief mechanism for convenient adjustment of equipment. With reverse flow mechanism. Can be installed between a solenoid valve and an actuator and used as a check-type regulator. A type with a pressure gauge is also ...

See the other products
NIHON PISCO CO., Ltd.
ball valve
ball valve
1501

DN: 12, 7, 10, 8 mm
Pressure: 15 bar
Temperature: 0 °C - 90 °C

– Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials Brass housing (Ms58), nickel-plated Ball made of brass (Ms58), chrome-plated Handle ...

ball valve
ball valve
5050 series

DN: 10 mm - 45 mm
Pressure: 0 bar - 60 bar
Temperature: -20 °C - 220 °C

– Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Ball valve up to max. 60 bar Actuation up to max. 8.4 bar Materials Brass ...

pinch valve
pinch valve

DN: 80 mm - 100 mm

Pinch valves suitable for intercepting a wide range of products. - Size 80 - 100 mm - Valve composed of two identical half-bodies, both for the external part in aluminum and for the internal gasket - ...

electric valve
electric valve

DN: 15 mm - 600 mm
Pressure: 16 bar - 250 bar

Electric ball valve Body material: Stainless steel, Carbon steel End connection: RF, BW Operation: Electric

See the other products
Athena Engineering S.r.l.
needle valve
needle valve
FN series

DN: 3 mm - 28 mm
Pressure: max 689.0 bar
Temperature: -53 °C - 648 °C

Athena Forged Needle Valve Performance -Compact forged design for high temperature and high pressure -Rolled threads of packing bolt ensures longer life service -Cold rolled threads of valve stem -Stellite ...

See the other products
Athena Engineering S.r.l.
needle valve
needle valve
ON series

DN: 3 mm - 12 mm
Pressure: max 689.0 bar
Temperature: -53 °C - 648 °C

... Union-Bonnet Needle Valve Performance -Compact design for special extreme working conditions -Cold rolled threads of compact valve stem -Non-rotary ball type lower stem and adjustable lower stem available -Union-bonnet ...

See the other products
Athena Engineering S.r.l.
ball valve
ball valve
YCP

DN: 0.5 in - 2 in
Pressure: 3.5 bar - 7 bar
Temperature: -10 °C - 180 °C

... CF8 / CF8M Seal - TEFLON / VITON / EPDM / SILICON Media Steam, Air, Water, Chemical, Gases, Oil, Diesel, Hot Water Cover SS304 Plate Aluminum Die-Cast Working Pressure 3.5 to 7 bar air (Not recommended ...

ball valve
ball valve
ACP series

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C

Angle Seat Valve with Plastic Operator (NC/NO/Double Acting) > Port: - Refer below technical data sheet (Available BSP / NPT) > End Connection: - Screwed / Flange / Tri-Clamp > Body Material: - SS ASTM A351 Grade ...

electric valve
electric valve
SOGAV 2.2

See the other products
AWF
jumper valve
jumper valve
4418F

Pressure: 13 bar - 50 bar
Temperature: -29 °C - 204 °C

See the other products
AWF
jumper valve
jumper valve
4123

Pressure: 3 bar - 35 bar

See the other products
AWF
double-offset valve
double-offset valve
ELARA

DN: 50 mm - 800 mm
Pressure: 10 bar - 50 bar
Temperature: -40 °C - 400 °C

... eccentric butterfly valve Elara is available in forged or cast executions and different body, disc and seat materials. Application fields cover power generation, district cooling and heating as well as chemical processes ...

pressure-reducing valve
pressure-reducing valve
RET-DS/REF-DS

DN: 0.5 in - 6 in
Pressure: 1 bar - 13 bar
Temperature: -15 °C - 180 °C

Model RET-DS / REF-DS are the Direct Acting Pressure Reducing Valve designed with Duplex Stainless Steel material providng more options for different industries. Pressure Reducing Valve protecting the ...

vent valve
vent valve
ATRF

DN: 0.5 in - 2 in
Pressure: 0 bar - 20 bar
Temperature: -15 °C - 80 °C

... Sprinkler air venting systems. Air Vent Valve for Fire Protection function to release air pockets that collect at each high point of a full pressured pipeline Features ◆ ...

slide valve
slide valve
VM

DN: 0.5, 0.125, 0.25, 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 70 °C

Series of slide valves manually operated. In line mounting they work to close the supply and at the same time exhaust the downstream circuit air.

See the other products
SAF S.R.L.
ball valve
ball valve
M series

DN: 10, 5.5 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C

Series of miniature ball valves with cast body, manually operated and with reduced dimensions. In line mounting they work to close or open the flow in both directions.

See the other products
SAF S.R.L.
ball valve
ball valve
VL

DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C

Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.

See the other products
SAF S.R.L.
cast steel valve
cast steel valve
GVMS

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...

exhibit your products

& reach your clients in one place, all year round

Exhibit with us