- Hydraulics - Pneumatics >
- Valve >
- Manual valve >
- OMAL
OMAL manual valves
DN: 50 mm - 1,400 mm
Pressure: 16 bar - 420 bar
... soft-seated trunnion mounted ball valves are designed according to API6D standard and be offered two-piece and three-piece split body designs. The valves can be applied in wide pressure and temperature ...
Athena Engineering S.r.l.
DN: 50 mm - 2,400 mm
Pressure: 16 bar - 420 bar
... eccentric butterfly valve, with two-way sealing zero leakage, small torque characteristics, metal sealing valve seat can make it suitable for all kinds of harsh working conditions, the eccentric design ...
Athena Engineering S.r.l.
DN: 50 mm - 2,400 mm
Pressure: 16 bar - 100 bar
... eccentric butterfly valve, using elastic pressure self-sealing valve seat structure, with two-way zero leakage and can achieve lower torque, reduce the cost of driving device procurement. Cam effect type ...
Athena Engineering S.r.l.
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
... Bi-directional zero leakage butterfly valve.ISO Pad for mounting, Gear Operator /ActuatorExtremely small play between the stem and disc due to ‘Double D’ drive.Accurate dual stem sealing prevents leakage.Butterfly valve ...
UFLOW AUTOMATION
DN: 50.8, 3, 4 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 140 °C
... Bi-directional zero leakage butterfly valve.ISO Pad for mounting, Gear Operator /ActuatorExtremely small play between the stem and disc due to ‘Double D’ drive.Accurate dual stem sealing prevents leakage.Butterfly valve ...
UFLOW AUTOMATION
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Butterfly Valve Bi-directional zero leakage butterfly valve.
UFLOW AUTOMATION
DN: 2 in - 8 in
Pressure: 0 bar - 284.4 bar
... FVF, a Foot Valve with Strainer and clean lever that make removing of debris easy. It is used in any water pump system pipelines, also served as a check valve function to prevent backflow. What is ...
Elite Line Industrial Corp.
DN: 0.5 in - 2 in
Pressure: 0 bar - 20 bar
Temperature: -15 °C - 80 °C
Model ATRF, This model include a manual lever for quick release action in urgent situations. Suitable for UL Fire protection and Fire Sprinkler air venting systems. Air Vent Valve for Fire Protection ...
Elite Line Industrial Corp.
DN: 2 in - 12 in
Pressure: 300 psi
Temperature: 0 °C - 80 °C
Model HBF-300G , UL Listed Grooved Type Butterfly Valve, cuts or regulates the flow of fluid through the piping systems. Grooved Type Butterfly Valve for fire protection serve as a control valve ...
Elite Line Industrial Corp.
DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h
... limited by the design of the valve. The valve seat and plug are made of ceramic or solid stellite materials, the mechanical performance of which assures high durability of the product. We can adjust ...
Zaklady Automatyki POLNA S.A.
DN: 200 mm
Pressure: 100, 80 bar
Flow rate: 175 m³/h
... on the type of valve. High pressure recovery valves (butterfly valves, ball valves) have a low FL value and are not suitable for operation under throttled flow and cavitation ...
Zaklady Automatyki POLNA S.A.
DN: 80, 100, 50, 60 mm
Pressure: 250, 320 bar
... circuit of the pump (by-pass). The valve type Z1B-M thanks to its construction, selection of materials and technology is a valve adapted to use in the most difficult working conditions, at a high pressure ...
Zaklady Automatyki POLNA S.A.
DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN ...
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C
Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim max 150°C 13 BAR consolflange for electric actuator. Made in Italy. Fields of application: Industrial plants - Sea water use - Fuel - Aggressive ...
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C
Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim position indicator drain plug max 150°C 13 BAR. Made in Italy. Fields of application: Industrial plants - Sea water - Fuel - Aggressive fluids ...
Maran e Peracini srl
DN: 50 mm - 600 mm
Pressure: 6, 5 bar
... PVC-U, PP and PVDF • Actuation by manual lever or reducer steering wheel • Possibility of electrical or pneumatic actuation DA, NA, NC • Electro Positioner 4-20mA or limit switch box position indication • Lever manual ...
DIVATEC,SL
DN: 10 mm - 50 mm
Pressure: 10, 16 bar
... • Box with limit switches position indication (electromechanical and / or inductive) Advantage • High quality industrial valves • Flexible modular system with a wide range of variants • Reliable material combinations ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 10, 16 bar
Temperature: -20 °C - 100 °C
• BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball ...
DIVATEC,SL
DN: 15 mm - 250 mm
Pressure: 0 bar - 10 bar
VSG VSG type is a globe valve for gas suitable for inline installation and end-of-the-line mounting. The inner globe is manufactured with a full and straight gas passage that results in low pressure drop and limited ...
Elettromeccanica Delta S.p.A.
DN: 10 mm - 100 mm
Pressure: 16 bar - 64 bar
... without restrictions guaranteed High-precision Maximum versatility The VVS is a manual sanitary ball valve made by positioning a precision ball with hole inside the valve body whose ...
BARDIANI VALVOLE S.p.a.
DN: 63 mm - 110 mm
HYDRAULIC MANUAL VALVE Hydraulically or Pneumatic operated. TYPICAL APPLICATIONS Irrigation, water treatment, animal feeding plants.
The valves come in various types: The 5207065 valve this type is an adjustable valve with a remote-controlled air and abrasive cut-off system. The S898 valve on the other ...
DN: 0.5 in
Pressure: 250 bar
Temperature: -20 °C - 80 °C
This type of valves allows the fast and exact regulation of the flow in a sense. Roquet commercializes regulators of 2 and 3 ways with connections with threaded fittings or plate.
DN: 15 mm - 150 mm
Pressure: 40 bar
Temperature: -40 °C - 300 °C
The valve is fitted directly in the process line or on a by-pass. A constant flow through the valve guarantees a directly representative sample
Pressure: 1.5, 3.5 bar
Temperature: -20 °C - 120 °C
... drop through opening,packing sealed to the outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon ...
Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C
... drop through opening,packing sealed to the outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon ...
Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C
... drop through opening,packing sealed to the outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon ...
DN: 25 mm - 400 mm
Pressure: 10, 16 bar
Temperature: 70 °C
The RAF 01 manual valve is a Normally Closed (N.C) line pressure hydraulically actuated. The 3-W selecting cock valve changes positions: The RAF 01 valve opens when ...
DN: 200 mm - 1,800 mm
Pressure: 16 bar - 31 bar
Temperature: -10 °C - 50 °C
RAPHAEL’s new double eccentric butterfly valve represents the essence of an efficient butterfly valve designed for when economy is a high priority. BTF-E is functional and reliable, providing reduced ...
DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 10 °C - 55 °C
special ball valve completely moulded in place extremely low clearance volume high operating reliability - high torque transmission due to generously dimensioned stem excellent flow characteristics
ASV Stuebbe GmbH & Co. KG
DN: 10 mm - 50 mm
Pressure: 10 bar - 16 bar
Flow rate: 51,000 l/h
Proportional ball valve based on the C 200 Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Simple automation using electric variable speed actuators Reproducible ...
ASV Stuebbe GmbH & Co. KG
DN: 10 mm - 25 mm
Pressure: 10 bar - 16 bar
Temperature: -30 °C - 140 °C
Dosing ball valve based on the C 200 Finely adjustable using 180° opening angle Reproducible settings by means of 180° scale disk / scale division 5° Simple automation using electric variable speed actuators
ASV Stuebbe GmbH & Co. KG
DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C
The rossignol metering valve will be fitted di- rectly to the cylinder valve. Due to the slim conus of the metering spindle the rossignol valve guarantees precise metering. As an ...
Hornung GmbH
DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C
The diaphragm shut-off valve HP 550 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has 3 inlets and one outlet. Threaded holes on the reverse side connect to a bracket ...
Hornung GmbH
DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C
The diaphragm shut-off valve HP 551 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has an inlet and an outlet. Threaded holes on the reverse side connect to a bracket ...
Hornung GmbH
DN: 4, 6, 8, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C
Industry's First! (Patent no. 5578502) The function of a shock absorber is built in a speed controller. Two-stage exhausting flow rate adjustment make the same control as a cylinder with a shock absorber possible. No more cylinder ...
NIHON PISCO CO., Ltd.
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C
... different flow range for each size are available. Easier fine adjustment is possible in each flow range, compared to Pisco conventional standard speed controller. The industry's smallest and low profile. It has ...
NIHON PISCO CO., Ltd.
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
... prevents unnecessary manual adjustments during the operations. Use a slot screwdriver to adjust the needle (speed adjustment). Design without an external needle for speed adjustment. Approx. 2/3 height of the ...
NIHON PISCO CO., Ltd.
DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C
2 way MM BRASS Diamant ball valve 2-way MM BRASS with caps and tangs Full bore PN16 Code - Size - DN - PN - KVS DC2A2A - 1/2" - 15 - 16 - 16,3 DC2B2A - 3/4" - 20 - 16 - 29,5 DC2C2A - 1" - 25 - 16 - 43
Comparato Nello S.r.l.
DN: 20, 25 mm
3 way MMM BRASS Diamant ball valve 90° – DIVERTING / MIXING 3 vie MMM in OTTONE con codoli e calotte Passaggio totale PN16
Comparato Nello S.r.l.
DN: 20 mm
BY-PASS BRASS Diamant ball valve BY-PASS MMMM BRASS with caps and tangs Full bore PN16
Comparato Nello S.r.l.
DN: 2 in - 36 in
... Recovery Mainline Block Valves Tank and Station Valves Block & Bleed Valves Manifold Valves Launcher/Receiver Trap Valves ...
CELEROS
DN: 2 in - 84 in
The M&J Valve Model M-303 is an advanced design slab gate valve for high pressure differential applications in the oil & gas sector. It is designed to simplify installation and upgrades, improve safety ...
CELEROS
DN: 3 in - 24 in
M&J Valve's high quality 4-way diverter valve system is specifically designed for the rigid requirements of bi-directional meter proving. The M&J 4-Way Diverter Valve is the heart of ...
CELEROS
DN: 0.125, 0.5, 0.25, 0.375 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
ITV
DN: 0.25, 0.5 in
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 60 °C
– Robust design – Modular structure Operating pressure - Max. 25 bar, depending on design Materials - Body made of aluminium pressure die-casting Cup made of metal Thread - DIN 2779 Connection sizes - G1/4“ to G1“ Medium - Compressed air
ITV
DN: 12, 7, 10, 8 mm
Pressure: 15 bar
Temperature: 0 °C - 90 °C
– Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials Brass housing (Ms58), nickel-plated Ball made of brass (Ms58), chrome-plated Handle ...
ITV
DN: 10 mm
Pressure: 10 bar
Front control valve, inlet and outlet copper tube 10x1mm, for compressed air Needle headwork with fine regulation TECHNICAL FEATURES Media: Compressed Air Maximum pressure: 10 bar Fluid identification: EN 13792 Design: ...
Carlos Arboles S.A.
Pressure: 10 bar
Temperature: 65 °C
Front control valve, inlet and outlet G1/4" female, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: EN 13792 Design: DIN 12918-1 Inlet / Outlet: ...
Carlos Arboles S.A.
Pressure: 10 bar
Front control valve, inlet and outlet G1/4" female, for compressed air Needle headwork with fine regulation TECHNICAL FEATURES Media: Compressed Air Maximum pressure: 10 bar Fluid identification: EN 13792 Design: ...
Carlos Arboles S.A.
DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... EPDM-seat gasket cone rotatable, protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel ...
Kemper Olpe GmbH
DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... sensor or thermometer can be added using immersion sleeve spindle thread not in contact with medium wear-resistant valve seat made of stainless steel up to DN 50 with a black handwheel free from dead ...
Kemper Olpe GmbH
DN: 50, 15, 40, 25 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water spindle with O-ring EPDM-seat gasket gunmetal cone male union thread with plugged drain ...
Kemper Olpe GmbH
DN: 100 mm - 400 mm
Temperature: -25 °C - 150 °C
Butterfly valves suitable for intercepting powdered products - Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of ...
DN: 150 mm - 800 mm
Slide gate valves suitable for intercepting products in powder, granules, fibers and heavier materials - Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in ...
DN: 250 mm - 300 mm
Temperature: -15 °C - 100 °C
Butterfly Valves for silos suitable for intercepting powder products - Valve body in carbon steel - Size DN250 - DN300 - With square or round fixing flange - Monobloc gasket in NBR for continuous ...
DN: 150, 200, 250 mm
Pressure: 67 bar
The emergency gate valves are widely used as safety systems during maintenance work. The valves fitted under the tanks offers easy dismantling of the part below them without the need to empty the tank. ...
Knife gate valves for isolating the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening and closing. The ...
Pressure: 3 bar - 35 bar
DN: 6.35 mm
Pressure: 0 psi - 150 psi
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining