- Hydraulics - Pneumatics >
- Valve >
- Manual valve >
- OMAL
OMAL manual valves
Pressure: 29.4, 31.6, 35.7, 42.2, 49.6 bar
Temperature: 38, 100, 200, 300, 400 °C
... all stop valves and with test and drainage function. The TrapStation TS 36 encompasses the universal connector, two stop valves - which are accessibly positioned and clearly colour-coded to ensure easy ...
GESTRA AG
DN: 0.125, 0.5, 0.25 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 60 °C
Axial slider valves allow to stop air flow inside a pneumatic system, simply by sliding the lever along the axis. Axial slider valves have zinc plated brass body while the slider is made of anodized ...
Pressure: 0 psi - 5,500 psi
The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen Service Valve ...
Generant
DN: 250 mm - 3,000 mm
The dapò valves are widely used where a regulation of the flow rate or a partialization of the air flows is required. Dapò adjustment valves with diameters from 250 mm up to 3000 mm are possible. For ...
... Below are some types of guillotine valves and type of control: Unidirectional guillotine valve Guillotine valve with through blade both types can have the following commands Handwheel ...
Pressure: 0 Pa - 2,000 Pa
Temperature: 0 °C - 1,000 °C
As for industrial round valves, square valves are also designed taking into account the pressures and temperatures of use. The industrial square valves do not have a standard dimension, ...
DN: 10 mm - 600 mm
... CERAMIC INDUSTRY, as a shut-off valve for solids, sludge, etc. ENVIRONMENTAL TECHNOLOGY, for sealing waste water, dust, sludge, etc. WATER TREATMENT/SEWAGE TREATMENT PLANTS, as a shut-off valve ...
AKO ARMATUREN
DN: 15 mm - 1,200 mm
Pressure: 3 bar - 40 bar
... closing process causes any incrustations inside the sleeve to break away. This means that the manual and control Pinch Valve is a practically blockage-free valve solution. Furthermore, ...
AKO ARMATUREN
DN: 15 mm - 250 mm
Pressure: 5, 3, 4, 2 bar
... of manual and conrol Pinch Valves OV series A selection of different elastomer grades for the sleeve (e.g. rubber, neoprene, nitrile and EPDM) ensures that the valves have a very wide ...
AKO ARMATUREN
VPG BUTTERFLY VALVE This valve is designed for the HVAC market and offers the best value for money! Excellent sealing: shaft protected by a sheath, IP67 manual gearbox. Complies ...
TECOFI
DN: 0.25 in - 2 in
Pressure: 140, 100 bar
Temperature: -20 °C - 220 °C
... class of 600lbs. It is specialized with a locking device, hand wheel, stem extension and an ISO 5211 mounting pad. For high temperature, PEEK seat is on request. 3 pièces carbon Steel bail valve fully ...
SFERACO
DN: 0.75, 0.5 in
Pressure: 150, 300 psi
Temperature: 358, 550 °F
... Control Four-V Port Globe Valves are equipped with a micrometer dial and pointer which enables the valve to set within 1/100th of a turn of the handwheel. This allows you to fine-tune the blowdown flow ...
DN: 0.5 in
Pressure: 30 psi - 125 psi
Walchem’s economical Tri-Purpose Valves are three valves in one. Installed in one direction, the spring loaded PTFE faced diaphragm provides 30 psi of back pressure and anti-syphon protection. Installed ...
Pressure: 30 psi - 150 psi
Walchem’s Multi-Function Valves (MFV) provide anti-syphon, back pressure, bleed, drain and pressure relief for your 11, 16 and 21 size E class metering pumps. These valves will prevent syphoning when ...
DN: 40 mm - 125 mm
Pressure: 6, 16 bar
Temperature: -20 °C - 80 °C
The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. ...
DN: 40 mm - 70 mm
Pressure: 6, 16 bar
Temperature: -20 °C - 80 °C
The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. ...
DN: 50, 65, 80 mm
Pressure: 0.5 bar - 1.5 bar
Temperature: -20 °C - 80 °C
The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. ...
DN: 0.5 in - 6 in
Flow rate: 0 us gal/min - 880 us gal/min
... calculations when selecting control valves Always maintains 100% authority, ensuring excellent control Combination valve reduces cost and more accurate flow control lowers lifecycle costs ...
Bell & Gossett Domestic Pump
DN: 0.15 in - 1 in
Pressure: 10 bar
Temperature: 93 °C
Combines three valves in one: Isolation Valve, Check Valve and Companion Flange Free floating flange allows easy alignment and installation of pumps Prevents gravity circulation Isolates ...
Bell & Gossett Domestic Pump
DN: 0.75 in - 3 in
Flow rate: 0 l/min - 300 l/min
... Bronze valves with seat connections. Packing & Gasket: Asbestos-Free B&G Flo-Control Valves are used for preventing gravity flow in forced water systems and to permit summer-winter operation of ...
Bell & Gossett Domestic Pump
Pressure: 28,000,000 Pa
Temperature: -20 °C - 100 °C
Flow rate: 0 l/min - 120 l/min
... swing motor LS control + constant horsepower control Good for straight traveling of wheel motors Various kinds of attached valves
DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316
SOCLA
DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M
SOCLA
DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible
SOCLA
DN: 3, 5.5 mm
Pressure: 20 bar
Temperature: -20 °C - 80 °C
2/2-way socket ball valve Micro brass design chromed with connection connector and male R-thread Producer Material of casing: Brass chromed Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material ...
Mader
DN: 15 mm - 76 mm
Temperature: -10 °C - 170 °C
2/2-way ball valve brass design nickel-plated in medium heavy design with female G-/R-thread Producer Material of casing: Brass nickel-plated Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material ...
Mader
DN: 10, 15, 20, 25 mm
Temperature: -20 °C - 150 °C
2/2-way ball valve brass design nickel-plated with butterfly handle with male thread Producer Function principle: 2/2-ways Actuation type: manually Material of casing: Brass nickel-plated Material of ball: Brass ...
Mader
DN: 4 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 80 °C
Connection 1 + 2 BSP cylindrical internal threads Sealing form 1 + 2 for screw-in pins with shapes A, B and if necessary E Note Bitte die Bedienungsanleitung für Kugelhähne beachten. Bitte die zul. Druckangaben ...
HANSA FLEX AG
DN: 6 mm - 38 mm
Pressure: 400 bar
Temperature: -20 °C - 60 °C
Connection 1 + 2 BSP cylindrical internal threads Sealing form 1 + 2 for screw-in pins with shapes A, B and if necessary E Note Bitte die Bedienungsanleitung für Kugelhähne beachten. Bitte die zul. Druckangaben ...
HANSA FLEX AG
DN: 6 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C
Sealing form 1 - 3 Shape A Connection 1 - 3 BSP cylindrical internal threads Bore L shaped Contact travel 0°; 90° Surface nickel plated Material Brass housing Aluminium handle Brass ball, ...
HANSA FLEX AG
DN: 6 mm
Pressure: 500 bar
... high-pressure ball valves for plate mounting up to 500 bar. Block body design for manifold mounting with either 4 or 6 mounting holes for added safety; improved manifold design eliminates external piping and connectors. Ball ...
STAUFF
DN: 15 mm - 250 mm
Pressure: 16 bar - 40 bar
Temperature: -5 °C - 200 °C
The new KLINGER ball valve Monoball KHO is fully welded and generally used in the sector district heating, heating- and air conditioning and plant construction. The product is durable, functional, maintenance-free and ...
KLINGER
DN: 8 mm - 19 mm
Pressure: 0 bar - 40 bar
Brass diaphragm valve For non corrosive gases and gas mixtures up to quality 6.0 Suitable for pressures up to 40 bar Wide range of in- / outlets Metal-to-metal sealing to atmosphere Tested to use with ...
DN: 8 mm - 19 mm
Pressure: 1 Pa - 4,000,000 Pa
Product features Stainless steel diaphragm valves For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0 Suitable for pressures up to 40 bar Wide range of in- / outlets ...
DN: 0.5 in - 3 in
Series CSM-61 Flow Measurement Valves monitor system flow in low to medium flow rate HVAC units providing a highly accurate flow measurement. It consists of bronze body construction with bi-directional, positive shutoff ...
Watts Water Technologies
DN: 25 mm - 500 mm
Temperature: -273 °C - 450 °C
... synchronized with the safety valves -Complete, coordinated combination of one supplier with qualified resistance coefficients Bursting discs with safety valves in combination -Tight up to the set ...
DN: 0.25 in
Pressure: 5,000 psi
Multiple-turn flow restrictor valves Features Hytec’s Needle Valves are multiple-turn flow restrictor valves which provide finely adjustable flow control for components or circuits ...
DN: 0.25 in
Pressure: 5,000 psi
High Pressure Ball Valves Designed for shifting under high differential pressures Features These two new high pressure ball valves provide full unrestricted flow and positive shut-off of fluids under ...
Model : MSC100 / 200 / 300 / 500 / 600, Medium : Air, Operating pressure range: 0~1 MPa, Proof pressure: 1.5 MPa.
DN: 0.125 in - 1.25 in
... Ross E104 is an array of valves that can handle heavy-duty applications. Their frameworks are constructed with heavy cast aluminum offered in 2/2, 3/2, 4/2, or 4/3 configurations with port sizes from G 1/8 up to G 1-1/4. ...
DN: max 80.0 mm
SCHÜTZ CLEANCERT is the new packaging standard for applications where safety and technical cleanliness is crucial. Advantages: CLEANCERT is the highest level of process and product cleanliness and safety offered by SCHÜTZ Extensive ...
DN: 15 mm - 200 mm
Pressure: 4 bar - 16 bar
Temperature: 140, 110, 90 °C
Butterfly valves/Leakage butterfly valves KIESELMANN butterfly valves are a space-saving solution for hygienic process plants. They are preferably applied for panels, for tank shut-off ...
DN: 25 mm - 100 mm
Pressure: 10, 16 bar
Temperature: 140 °C
... space-free. In addition to passage ball valves and three-way ball valves, also ball valves with rinsing connections and heating jacket are available. ► gap-free sealing of the housing ► ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining