DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C
Type: Angle seat valves Functioning: 2/2 way pneumatically operated, Normally closed Body material: Stainless Steel AISI 316 series Port connection: G 1/2, G 3/4, G 1, G 1 1/2, 1 1/4, 1 1/2, 2 Flow Kv (l/min): 80, ...
DN: 0.5, 0.125, 0.25, 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 70 °C
Series of slide valves manually operated. In line mounting they work to close the supply and at the same time exhaust the downstream circuit air.
DN: 10, 5.5 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of miniature ball valves with cast body, manually operated and with reduced dimensions. In line mounting they work to close or open the flow in both directions.
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.
DN: 2 in - 36 in
Pressure: 3,000, 10,000, 5,000 psi
Temperature: -46 °C - 200 °C
... rising stem slab gate valves manufactured by qilong valve are available in temperature classes L, P, R, S, T, and U specified in API 6A. Gate valves to be used in the 350℉ or 650℉ high ...
wenzhou domos fluid equipment co.,ltd
DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C
... unstable factor, the trunnion ball valve downstream seat will be pushed by un-normal pressure, and the release the un-normally pressure automatically, it doesn’t damage to the sealing of upstream seat. 9) The valve ...
wenzhou domos fluid equipment co.,ltd
DN: 50 mm - 1,000 mm
Temperature: -46 °C - 550 °C
... to corrosion protection. 5) Valve stem with bow friction coefficient of the bearing. 6) Valve seat spring is made of the X-750 INCONEL helical spring, to ensure the sealing performance of the valve ...
wenzhou domos fluid equipment co.,ltd
Pressure: 250 bar
CAV-250 Stand-alone high pressure valves for all type of paint types. CVM-250 is a colour valve module to be used for external paint or material supply to an applicator of any type. Can be built in ...
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...
Di Nicola Infinam Srl
DN: 3.96 in
Temperature: 35, 40 °F
... locomotive freeze protection valve in the world. This self-operating valve is designed to monitor the water temperature of the engine’s water-cooling system and automatically snap open to drain it if ...
DN: 3.88 in
... standard GURU® Plug. This thermostatic drain valve responds to the engine coolant temperature and will pop open to rapidly drain the system before freeze damage can occur when the coolant reaches the valve’s ...
Temperature: 35, 40 °F
The GURU® Valve DL2.1 CH and CHS Plugs are self-operating drain valves that are easily retrofitted into water-cooled air compressor heads to protect the compressors from freeze damage when a locomotive ...
DN: 50 mm - 750 mm
Pressure: 1, 1.6, 2.5 MPa
... for changes in temperature and pressure Installable Accessories Solenoid Valve Limit Switch Positioner Air-Filter Regulator Hand Wheel Speed Control Valve
ROPO GmbH
DN: 2 in - 64 in
• Pressure: ANSI CLASS 150LB-2500LB • Types of connection: butt welding • Design of valves is in accordance with: API6D,ASME B16.34 • Length: ASME B16.10 • Connection standard: ANSI B16.25 • Test and examination:API6D,API598
ROPO GmbH
DN: 2 in - 64 in
• Pressure: ANSI CLASS 50LB-2500LB • Types of connection: flange and butt welding • Design of valves is in accordance with: API6D,ASME B16.34 • Length: ASME B16.10 • Connection standard: ANSI B16.5, ANSI B16.25 • ...
ROPO GmbH
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
- Manually operated 2-way ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material ...
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... adjustment M&C RV 11-… needle valves, this is possible in a reliable and exact manner thanks to the optimum design of the valve control system. The use of corrosion-resistant materials also ensures analytical ...
DN: 25 mm - 1,000 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -40 °C - 230 °C
Plastic lined butterfly valves SBP are available in either wafer or lug style for on/off, throttling or control applications for liquid, powdery media or gaseous service. Main features • Large selection of different ...
DN: 10 mm - 50 mm
Pressure: 63 psi
Temperature: -328 °F - 392 °F
... to-196°C. The shut-off valves are approved according to DIN EN 1626. The series is available in the nominal widths DN10 - DN50 and can be designed with connection options for welding ends and welding sockets. The manual ...
Goetze KG Armaturen
Pressure: 10 bar
Temperature: -5 °C - 70 °C
Should a sudden pressure failure happen. if the stop valves are assembled in pairs on the cylinder. the stop valves make sure, that the cylinder piston rapidily stops. By operating the override device, ...
DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C
Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 60 °C
Dueker gate valves – for water and gas.Reliable, safe and cost-effective. Dueker gate valves are used to great effect all over the world. There is a good reason for this – valves have ...
Düker GmbH
Pressure: 6 bar - 10 bar
Temperature: 135, 150, 121, 130 °C
The valve body of the RIEGER aseptic valves is hermetically sealed from the environment, thus ensuring the perfect protection for your liquid product. The pocket-free design of the valve ...
Pressure: 6 bar - 10 bar
Temperature: 121, 135 °C
By means of the BioCheck sampling valve, samples can be taken easily and safely out of closed systems like vessels and pipings. When designing this sterile fitting, special emphasis was placed on the aseptic, but also ...
Full Material Offering: Bronze, Brass, Lead-Free Brass, Carbon Steel and Stainless Steel 100% Factory Testing for Quality Assurance Fully-Rated and Certified MATERIALS OF CONSTRUCTION Bronze Brass Lead-Free ...
Crane Process Flow Technologies GmbH
Overview CRANE® bronze angle valves have stood up to commercial and industrial services for more than a century.
Crane Process Flow Technologies GmbH
Overview CRANE® bronze gate valves have stood up to commercial and industrial services for more than a century.
Crane Process Flow Technologies GmbH
THROTTLE VALVE WITH FREE FLOW IN ONE DIRECTION DESCRIPTION The QTM7 valve is a one-way flow control valve with built-in non-return valve for reverse free flow, in ...
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
ECONEX Manual Reset Shut-Off valves Normally Closed of the series MRVA are equipped with a new-concept powerful solenoid capable of functioning at high operating pressures and flow capacities than most ...
ECONEX S.R.L.
DN: 80 mm - 500 mm
Pressure: 40, 16 bar
Temperature: -29 °C - 225 °C
... top flange DIN EN ISO 5211 full bore INTEC K200 - 2-piece Flanged Ball Valves INTEC K23x: Free outlet, clearance volume free. The ball valve revolution for all condition of aggregation. ...
KLINGER-SCHÖNEBERG GmbH
DN: 8 mm - 20 mm
Pressure: 160, 100 bar
Temperature: -50 °C - 225 °C
INTEC K110 Mini plant ball valve with female threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to DIN 3202 part 4-M3 ...
KLINGER-SCHÖNEBERG GmbH
DN: 8 mm - 20 mm
Pressure: 100, 160 bar
Temperature: -50 °C - 225 °C
INTEC K120 Mini plant ball valve with male threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to producers standard ...
KLINGER-SCHÖNEBERG GmbH
DN: 100 mm - 300 mm
Pressure: 102 bar
Temperature: 60 °C
... -shut valve, the subsequent restoration of the normal operating condition,also called RESET operation , is carried out in a purely manual manner, after having verified and solved the causes that led to ...
PIETRO FIORENTINI
DN: 1 in - 10 in
Pressure: 102 bar
Temperature: 60 °C
... slam-shut valve, the subséquent restoration of the normal operating condition, also cailed RESET operation , is carried out in a purely manual manner, after having verified and solved the causes that ...
PIETRO FIORENTINI
CONTROL GAS VALVES VLM VLM valves are bypass and throttling devices suitable for use with previously treated, non-aggressive gaseous fluids. The main characteristics of these valves ...
PIETRO FIORENTINI
Pressure: 12 bar - 50 bar
Temperature: 0 °C - 80 °C
This metering valve is developed by I.L.C. srl. It is being offered with manual, pneumatic as well as electrical actuations. In addition, the metering valve is meters out the lubricant ...
The NV62L Block & Bleed Valve is most commonly used in combination with a declutchable gear override. This Namur accessory mounts in-line with other components such as a Namur solenoid valve, directly ...
DN: 0.125 in - 0.75 in
Pressure: 0 psi - 145 psi
Temperature: -20 °C - 70 °C
1. The direction-change turns lightly with good hand feeling and exact orientation. 2. Large effective circulating area leads to little pressure loss. 3. Panel and body installation are optional. The panel installation ...
Airtac Automatic Industrial
DN: 0.25, 0.125, 0.43, 0.56 in
Pressure: 10,000, 6,000 psi
Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability Hard seat valves ...
NOSHOK
Pressure: 29.4, 31.6, 35.7, 42.2, 49.6 bar
Temperature: 38, 100, 200, 300, 400 °C
... all stop valves and with test and drainage function. The TrapStation TS 36 encompasses the universal connector, two stop valves - which are accessibly positioned and clearly colour-coded to ensure easy ...
GESTRA AG
Please specify:
Help us improve:
remaining