- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Piping >
- Parker Stratoflex
Parker Stratoflex piping
Inner diameter: 3 mm
Outer diameter: 7 mm
Pressure: 10,000 psi
... • Hose is hard to break and very flexible • Adapt from hose to virtually any device under test with only one connection • A corrosion resistant strain-relief on each hose ...
Ralston
Inner diameter: 3 mm
Outer diameter: 7 mm
Pressure: 700 bar - 2,760 bar
... -test™ USN Hoses 10,000 psi microbore hoses with male or female Ralston Quick-test USN connections provide high pressure, super low volume for quick access for testing and calibration of live pressure ...
Ralston
Inner diameter: 3 mm
Outer diameter: 6 mm
Pressure: 69,000 psi
... similar tube fittings without a wrench. • An excellent solution for connecting to tube fittings for pressure calibration, gas sampling, pressure reading and testing • A unique design that ...
Ralston
Temperature: -29 °C - 38 °C
Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment DESCRIPCIÓN: STAINLESS STEEL, COPPER AND PLASTIC PIPES AND MULTITUBES – Stainless Steel and Carbon Steel Pipes – Copper Pipes – Copper ...
Borg & Beck is an established world-wide supplier of premium quality automotive components to the vehicle aftermarket, with over 100 years history of engineering excellence and OE pedigree. Some of the most important products on a commercial ...
... Stainless Steel Pipe Suppliers, Stainless Steel Welded Pipe Suppliers, Stainless Steel Water Pipes Suppliers, Stainless Steel Pipe Dealers, Stainless Steel Pipe Suppliers, ...
Inner diameter: 40 mm - 600 mm
Pressure: 10, 16 bar
Intermediate lengths are deliverable Diameter bigger then DN 600 on demand Features Special coatings: Coating inside and outside Epoxy redbrown for sewage water Coating inside and outside Epoxy yellow for gas ...
Inner diameter: 19, 6.3, 12.5, 25, 10 mm
Pressure: 0 bar - 15 bar
Temperature: -20 °C - 60 °C
Reinforced rubber hose. Benefits Made of oil resistant rubber Temperature range -20⁰C - +60⁰C Made of oil resistant SBR&NBR rubber with a synthetic reinforcement, comes in coil of 50 m. working pressure 1.5 Mpa or up to 15 ...
Inner diameter: 15 mm - 600 mm
Pressure: 12.5, 10, 8, 6, 16 bar
SIZE: DN15~DN600 CONFORM TO: GB/T 13663.2-2018 GB/T 13663.2-2018 STANDARD: DIN
Inner diameter: 15 mm - 300 mm
Outer diameter: 20 mm - 315 mm
Pressure: 20, 16, 12.5, 10 bar
SIZE: DN15~~DN300 CONFORM TO: GB/T 18742.2-2017 STANDARD: DIN
Inner diameter: 0.5 in - 16 in
Outer diameter: 20 mm - 400 mm
Pressure: 20, 16, 12.5, 10 bar
SIZE: 1/2"~16" CONFORM TO: GB/T 4219.1-2008 GB/T18998.2-2003 STANDARD: DIN
As a TIER-1 supplier to Automotive - OEM sector and a Solution Partner we perform works, create special designs and create special products with our wide product range and strong stock management in line with Main Industry Manufacturers’ ...
Altantek Hidrolik Pazarlama ve Tic. A.S.
As a TIER-1 supplier to Automotive - OEM sector and a Solution Partner we perform works, create special designs and create special products with our wide product range and strong stock management in line with Main Industry Manufacturers’ ...
Altantek Hidrolik Pazarlama ve Tic. A.S.
Inner diameter: 5 mm - 102 mm
Outer diameter: 11.2 mm - 115 mm
Pressure: 30 bar - 400 bar
... wire and textile and allows the hose to withstand pressure. The hoses manufactured with steel wire layers have different types depending on their wire wounding type, mesh wound and spiral wound. Textile ...
Altantek Hidrolik Pazarlama ve Tic. A.S.
Inner diameter: 21.3 mm - 508 mm
Delivered length: 6 m
Welded tube - EN10217-1 Steel P235TR1 - black Body material - Carbon-Steel
Inner diameter: 4 mm - 22 mm
Delivered length: 1 m
Model: - pipe bendable - Material: - CopperR220 Model series: - Tube from rol - Delivery: - Not completely straight from the role Quality: - Industry EN 12449 - Maximum length: - 4mm, 6mm, 8mm, 10mm ...
Fiber architecture, resin formulas and finishes can be customized to your needs Composite tubing is designed to handle a wide array of strengths, so your tubing will last longer Designed to withstand the most caustic of environments, ...
... cylinder material in a variety of tie-rod applications. The PolySlide® and PolySight® products are supplied as a cylinder tube ready for assembly, or as a complete cylinder designed for your application. The cylinder ...
... approval to grade AFW-G-10. Quality control. Every finished tube is tested at 5000 volts minimum to guarantee its dielectric integrity. MANUFACTURED FOR OPTIMAL PERFORMANCE Polygon Tube provides ...
Inner diameter: 1, 16, 1.5 in
Outer diameter: 60.32 mm - 114.3 mm
Delivered length: 8,530 mm - 9,750 mm
Tubing is a special-purpose pipe used in the oil, main used to gas and water well, to extract the oil, gas and water to the surface. The tubing conform to API Spec 5CT " specification for Casing and tubing ", API Spec ...
Temperature: -40 °C - 300 °C
Bimetal anti-corrosion tubing is the special-purpose pipe used in oil, gas and water well to extract the oil, gas and water to the surface. The bimetal anticorrosion tubing is manufactured by taking ordinary new and ...
Outer diameter: 127 mm - 339.72 mm
Delivered length: 7,620 mm - 14,630 mm
Casing is a special-purpose pipe developed for oil (gas, water) wells in oil field. The products conform to API Spec 5CT "Casing and Tubing Specification", API Spec 5B "Casing, Tubing and Line Pipe ...
Outer diameter: 6 mm - 114 mm
Delivered length: 15,000 mm
... Bearing to cryogenic property. High-purity titanium seamless pipe GR1 is a type of titanium pipe that is made from commercially pure titanium grade 1 (GR1) material. This type of pipe ...
Delivered length: 2,000 mm
Hepworth Clay pipes and fittings can be used for the majority of drainage installations. Whether it’s domestic, adoptable, commercial or industrial drainage you are installing. Clay’s main benefits are its durability and longevity, plus ...
Wavin
Inner diameter: 2.5 mm - 17.5 mm
Outer diameter: 7 mm - 24.5 mm
Pressure: 3 bar
... high heat resistance, highly flexible. Operating temperature: from -40º C to +125º C,peak temperature 150º C BIODIESEL HOSE ACCORDING TO DIN 73379 TYPE C Resistance against biodiesel, petrol and diesel fuel, ECO-DIESEL ...
Inner diameter: 10 mm - 100 mm
Temperature: -40 °C - 135 °C
Delivered length: 1,000 mm
EPDM - Ethylene Propylene Diene Rubber EPDM elastomers have excellent heat, ozone/weathering, and aging resistance. They also exhibit excellent electrical insulation, compression set, and low temperature properties, but only fair physical ...
Pressure: 200 bar
Temperature: 90 °C
Admitted diameters: 1/4" - 3/8" - 1/2" Inlet thread size: 1/2"M BSP 60° Outlet thread size: 1/2"F BSP (+nipple 1/2 for 1/2"M BSP connection) Suitable for transfer: Air, water, premixed chemicals with water.
Dosanova bvba
Pressure: 20 bar
Temperature: 90 °C
Admitted diameters: 1/4" - 3/8" - 1/2" Inlet/Outlet thread size: 1/2"MF Suitable for transfer: Air, water, premixed chemicals with water.
Dosanova bvba
Pressure: 600 bar
Temperature: 90 °C
Admitted diameters: 1/4" - 3/8" - 1/2 Inlet/Outlet thread size: 1/2"MF Suitable for transfer: Air, water, premixed chemicals with water.
Dosanova bvba
Inner diameter: 13 mm - 38 mm
Outer diameter: 15 mm - 42 mm
Pressure: 20 bar
Aluminium pipe, blue, Pipe, PU 5 pcs., »speedfit« series - straight lengths Aluminium pipes, resistant to corrosion, electrically insulating. Material Surface coated aluminium Colour Blue Note Not suitable for water!
RIEGLER & Co.KG
Inner diameter: 6 mm - 76 mm
Pressure: 0 bar - 1,450 bar
... million load changes, far beyond the standards of ISO 6803 (400.000 cycles) Many hoses even tested according to ISO 6802, with one million cycles. Our production of hose lines In-house ...
Inner diameter: 110 mm
For vertically falling down materials to be handled with care: e.g. rice, wheat, feed, beans, medicines, macaroni and various small sized plastic materials.
Fini air treatment systems for industry are composed of refrigerating dryers, filters for separating impurities, condensate drain cocks, water-oil separators, tanks and all other components necessary for adapting the compressor room to ...
FINI
Inner diameter: 36 mm - 103 mm
Delivered length: 1, 1.5, 2 m
Inner diameter: 20, 25, 32 mm
Outer diameter: 22, 35 mm
Pressure: 500 mbar
Inner diameter: 2 mm - 18 mm
Outer diameter: 4 mm - 20 mm
The product range of plastic pipes and tubes includes many standard sizes with different temperature ranges and operating pressures, depending on the material. Versions are available in polyamide (PA 12-PHL), polyethylene (LD-PE), polyurethane ...
Inner diameter: 12.7 mm - 31.5 mm
Outer diameter: 20.6 mm - 45.7 mm
Pressure: 250, 275 bar
Specially designed to meet minimum bend radius Optimum cut and wear resistance Resistant to microbiological degradation Bonded tube and cover Lightweight compared to conventional rubber alternatives Increased lifetime Available ...
Inner diameter: 4 mm
Outer diameter: 8.6 mm
Pressure: 210 bar
... Inner tube made from smooth, seamless polyester extrudate Fabric lining made from synthetic fibres Protective casing made from smooth, seamless and imperforated thermoplastic polyurethane - Type - Hydraulic ...
Kramp
Inner diameter: 19.5 mm - 51.1 mm
Outer diameter: 32.3 mm - 71.1 mm
Pressure: 345 bar
... MISSION • INCREASED SAFETY • ENVIRONMENTAL PROTECTION • PRODUCT RESPONSABILITY • ENERGY CONSUMPTION REDUCTION • LEAKAGE-FREE HOSE ASSEMBLIES • OIL-LESS ASSEMBLIES • FULL SYSTEM CONTROL IN CASE OF HIGH PRESSURES, VIBRATIONS ...
Neodymium doped Yttrium Aluminum Garnet (Nd:YAG) laser rods are solid-state laser crystals with high gain, narrow linewidth and low lasing threshold. It is used for pulsed high energy and high power applications. EKSMA Optics offers ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining