- Hydraulics - Pneumatics >
- Valve >
- Manual valve >
- Pfeiffer Vacuum
Pfeiffer Vacuum manual valves
DN: 0.5 in - 6 in
Pressure: 16 bar
Temperature: -46 °C - 400 °C
... series is a line of ball valves manufactured by Penta. It offers an efficient solution for high-temperature fluid handling with reliability and capability. The ball valves are also produced with quality, ...
Penta Srl
DN: 0.5 in - 6 in
Pressure: 25 bar - 40 bar
Temperature: -46 °C - 400 °C
The complete range of valves form AP series are equipped with metallic seats in PENTAFITE that enables to manufacture metal seated ball valves with absolutely ZERO LEAKAGE and easy maintenance. The series ...
Penta Srl
DN: 0.5 in - 3 in
Pressure: 63 bar - 100 bar
Temperature: -46 °C - 400 °C
The AP20P is a valve that belongs to the AP series. It is equipped with metallic seats that permit the engineering of metal seated ball valves. It features ease of maintenance and it does not require ...
Penta Srl
DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h
... limited by the design of the valve. The valve seat and plug are made of ceramic or solid stellite materials, the mechanical performance of which assures high durability of the product. We can adjust ...
Zaklady Automatyki POLNA S.A.
DN: 200 mm
Pressure: 100, 80 bar
Flow rate: 175 m³/h
... on the type of valve. High pressure recovery valves (butterfly valves, ball valves) have a low FL value and are not suitable for operation under throttled flow and cavitation ...
Zaklady Automatyki POLNA S.A.
DN: 80, 100, 50, 60 mm
Pressure: 250, 320 bar
... circuit of the pump (by-pass). The valve type Z1B-M thanks to its construction, selection of materials and technology is a valve adapted to use in the most difficult working conditions, at a high pressure ...
Zaklady Automatyki POLNA S.A.
DN: 0.25, 0.125 in
Pressure: 0 bar - 8 bar
Temperature: -20 °C - 80 °C
2/2-way toggle lever valve, both sides, Push-in connector hose 4, G 1/8, Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched ...
RIEGLER & Co.KG
Pressure: 6 bar - 10 bar
Temperature: 121, 135 °C
By means of the BioCheck sampling valve, samples can be taken easily and safely out of closed systems like vessels and pipings. When designing this sterile fitting, special emphasis was placed on the aseptic, but also ...
Pressure: 6 bar - 10 bar
Temperature: 135, 150, 121, 130 °C
The valve body of the RIEGER aseptic valves is hermetically sealed from the environment, thus ensuring the perfect protection for your liquid product. The pocket-free design of the valve ...
DN: 15 mm - 80 mm
Pressure: 0.4 bar - 14.4 bar
Valves for use in pharmaceutical or food industries; operated by piston or by diaphragm, different connections possible, for example with clamp connection DIN32676, male union DIN 11851, aseptic connections DIN11864
Pressure: -1 bar - 10 bar
Temperature: -20 °C - 200 °C
In-line Valves • Extracts a liquid sample from pipeline. • Installed on Horizontal or Vertical pipeline. • Sample is representative. • All wetted parts are made from corrosion resistant materials. Materials of ...
Pressure: -1 bar - 9 bar
Temperature: 0 °C - 150 °C
Non-Intrusive Plug Valve Sampler • The plug is flush with the vessel wall when retracted. • Extracts a representative sample from the side of a vessel/dryer. • Can sample under vacuum or over-pressure • Sample Plug ...
DN: 40 mm - 800 mm
Pressure: 10, 16 bar
Temperature: -40 °C - 200 °C
Soft seated elastomeric Butterfly Valves SBE are available in either wafer or lug design for on/off, throttling or control applications for dilute acids and lyes, powdery media or gaseous service. Main features • ...
Swissfluid AG
DN: 25 mm - 1,000 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -40 °C - 230 °C
Plastic lined butterfly valves SBP are available in either wafer or lug style for on/off, throttling or control applications for liquid, powdery media or gaseous service. Main features • Large selection of different ...
Swissfluid AG
DN: 15 mm - 150 mm
Pressure: 40, 16 bar
Temperature: -40 °C - 200 °C
Fully lined Ball Valves for shut-off and control of corrosive, permeating liquids or gaseous media. Main features • Two-piece body, metal-to-metal joint • Anchored lining with positive locking to body • Dynamic, ...
Swissfluid AG
DN: 25 mm
Valve 25 of sphere with demultiplier. Thread of 1 “female-female, male-TC female or male-female.
Nuevas líneas de extincion
DN: 25 mm
25 sphere valve. Made of chromed brass. Thread of 1 “female-female or male-female.
Nuevas líneas de extincion
DN: 25 mm
25 ball valve made of chromed brass. Opening by butterfly. Thread of 1 “female-female or male-female.
Nuevas líneas de extincion
... by butterfly valves. Gearboxes are designed to enable butterfly valves to be opened by one person manually by turning the handwheel under rated pressure acting from one side. It is lockable and does not ...
STURDY MACHINE
They are simple water intake valves that transmit water to the land in agricultural pressurized irrigation systems. The user can irrigate by connecting the irrigation pipe directly to the outlets of the receiver valve. ...
STURDY MACHINE
When water is supplied to the pump outlets and pipelines, air accumulations in the system, especially in the pump outlets, narrow the water passage area and cause a decrease in capacity. Double sphere suction cups are used to avoid this ...
STURDY MACHINE
DN: 2 in - 84 in
The M&J Valve Model M-303 is an advanced design slab gate valve for high pressure differential applications in the oil & gas sector. It is designed to simplify installation and upgrades, improve safety ...
CELEROS
DN: 2 in - 36 in
... Recovery Mainline Block Valves Tank and Station Valves Block & Bleed Valves Manifold Valves Launcher/Receiver Trap Valves ...
CELEROS
DN: 3 in - 24 in
M&J Valve's high quality 4-way diverter valve system is specifically designed for the rigid requirements of bi-directional meter proving. The M&J 4-Way Diverter Valve is the heart of ...
CELEROS
DN: 0.5 in
Every wetkit is completed with hoses and adaptors of various types. Hyva offers a wide range of high quality parts dedicated to various truck related applications. These components are also critical from the quality point of view as they ...
DN: 1 in - 12 in
Pressure: 20 mbar - 70,000 mbar
Temperature: -20 °C - 60 °C
... For disengaging by decrease on pressure it is possible to regulate the shut-off valve from 0 to 15 bar; over matching the EN 14382 standard. The security shut-off valves are very fast disengaging, ...
DN: 1, 2 in
Pressure: 8 bar
The valve CELTIC-N is a new model developed by Gascat Engineering to use in blanketing systems. Blanketing systems is a process of using an inert gas such as nitrogen or carbon dioxide, in storage tanks to maintain a ...
DN: 10 mm
Pressure: 10 bar
Temperature: 65 °C
Front control valve, inlet and outlet copper tube 10x1mm, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: EN 13792 Design: DIN 12918-1 Inlet ...
Carlos Arboles S.A.
DN: 10 mm
Pressure: 0.2 bar
Front control valve, inlet and outlet copper tube 10x1mm, for burning gas "Push-turn" ceramic headwork TECHNICAL FEATURES Media: Burning Gas Maximum pressure: 0.2 bar Fluid identification: EN 13792 Design: DIN ...
Carlos Arboles S.A.
DN: 10 mm
Pressure: 1 bar
Front control valve, inlet and outlet copper tube 10x1mm, for vacuum Needle headwork with fine regulation TECHNICAL FEATURES Media: Vacuum Minimum pressure: down to 1 mbar Fluid identification: EN 13792 Design: ...
Carlos Arboles S.A.
Pressure: 40 bar
Temperature: -40 °C - 150 °C
... Gas, Chemical, Water Treatment DESCRIPCIÓN: FEATURES Connections: NPT (ANSI/ASME B1.20.1) and ISO 7 Rp Materials: These valves are supplied in nickel plated finish, for ISO 7 Rp thread. Brass 58 body. Ball made of ...
DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
AISI-316 · BSPP ISO-5211 mounting pad to mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded ...
ABV
DN: 0.25 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
Full bore · AISI-316 · BSPP · BUTT WELD · SOCKET WELD ISO-5211 mounting pad to mount directly actuarors Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static ...
ABV
DN: 0.375 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
AISI-316 · BSPP · NPT · BW · SW ISO-5211 mounting pad to mount directly actuators Characteristics • General industry application, •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static ...
ABV
DN: 40 mm - 1,200 mm
Pressure: 40, 10, 16, 25 bar
STANDARDS OF MANUFACTURE Metal seat gate valves EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 558 (ISO 5752) FACE TO FACE EN 1092-2 (ISO 7005-2) DRILLING ...
ACMO S.p.A.
Pressure: 20, 60 bar
The flowcontrol needle valve used at the gas inlet of the machine or the wire feeder gives full flow adjustment and is available at the work place regardless of distance to the gas cylinder/gas outlet.
DN: 2.5 in - 8 in
Pressure: 150 psi
... 2-1/2"~8" JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC handle type butterfly valve
Xiamen Keheng Plastic Co., Ltd.
DN: 2 in - 12 in
Pressure: 150 psi
JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC turbine butterfly valve
Xiamen Keheng Plastic Co., Ltd.
DN: 0.5 in - 4 in
Pressure: 150 psi
... : 1/2"~4" JOINT END TYPE: FLANGE(ANSI 、 DIN 、 JIS) WORKING PRESSURE: 150PSI Key words: PPH flange type double ball valve
Xiamen Keheng Plastic Co., Ltd.
DN: 150 mm - 610 mm
Temperature: 80 °C
... series of deflectors and retainers to reduce wear and extend service life Removable bonnet cover for easy inspection of valve body Displacement pocket prevents wedging and packing into an end seal Optional return ...
DN: 50 mm - 355 mm
Temperature: 80 °C
... from material flow by a metal insert. By design, the valve “self cleans” material from the seat on each stroke of the valve blade improving overall seat life. Ideal application: Manually operated ...
DN: 100 mm - 455 mm
... Vortex® Iris Valve opens from and closes toward the center of its opening to create a gradual flow or restriction of materials. This design ensures an even discharge of materials and allows manual control ...
DN: 3 in - 48 in
Pressure: 10, 16 bar
Temperature: -10 °C - 120 °C
... Double Flange Wafer Type Pneumatic Butterfly Valve Actuated SPECIFICATIONS Electric Actuator: ON-OFF Type, 220VAC, With handwheel Design Short Wafer type Double Flanged Centric Disc Butterfly Valves ...
pneumaticairactuator.com
... pressure, the ceramic valve shows its excellent performance. Ceramic valves can meet the high wear and strong corrosion environment, especially the outstanding feature is the long service life, the performance-price ...
pneumaticairactuator.com
Pressure: 1,000 psi
... Full Port Ball Valve 1000 WOG with direct mounting pad ISO 5211 are made of high quality 316 Stainless steel. The valve with socket welding end connection ensures no accidental leakage. SS316 Socket ...
pneumaticairactuator.com
DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C
... unstable factor, the trunnion ball valve downstream seat will be pushed by un-normal pressure, and the release the un-normally pressure automatically, it doesn’t damage to the sealing of upstream seat. 9) The valve ...
wenzhou domos fluid equipment co.,ltd
DN: 50 mm - 1,000 mm
Temperature: -46 °C - 550 °C
... to corrosion protection. 5) Valve stem with bow friction coefficient of the bearing. 6) Valve seat spring is made of the X-750 INCONEL helical spring, to ensure the sealing performance of the valve ...
wenzhou domos fluid equipment co.,ltd
DN: 50 mm - 1,400 mm
Temperature: -46 °C - 150 °C
... barrier. 5) Low valve torque 6) Valve fire test has API, 6FA, API607 7) Blowout prevention valve stem, anti-blow out stem 8) Anti-static design G-type series full welded ...
wenzhou domos fluid equipment co.,ltd
DN: 2 in - 64 in
• Pressure: ANSI CLASS 150LB-2500LB • Types of connection: butt welding • Design of valves is in accordance with: API6D,ASME B16.34 • Length: ASME B16.10 • Connection standard: ANSI B16.25 • Test and examination:API6D,API598
ROPO GmbH
DN: 2 in - 64 in
• Pressure: ANSI CLASS 50LB-2500LB • Types of connection: flange and butt welding • Design of valves is in accordance with: API6D,ASME B16.34 • Length: ASME B16.10 • Connection standard: ANSI B16.5, ANSI B16.25 • ...
ROPO GmbH
DN: 50 mm - 2,000 mm
Pressure: 10, 16 bar
ANSI CLASS 125/150 • Connecting Flanged: JB/T74-90 GB9113 ANSIB16.10 • Construclion: GB/T12221. ASME B16.10 • Body Material: CF8/CF8M/Carbon steel • Lined Material: PTFE/EPDM/FEP/NBR/VITON etc • Designed standard: ...
ROPO GmbH
Push-fit Hep2O includes unique features that enable quick and easy installation with a secure fitting. It is the only push-fit plumbing system with joint recognition, secure demounting and a 50 year guarantee.
DN: 25 mm - 100 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C
... extraction of the valve by means of 4 screws while the flanges welded to the installation remain fixed. Sanitary butterfly valvescan be operated automatically through an actuator (sanitary pneumatic butterfly valve, ...
INOXPA
DN: 25 mm - 100 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C
The A470 leakage butterfly valve can be used in most liquid product applications in the food-processing, pharmaceutical and chemical industries. The valve A470 offers a safe separation of products and ...
INOXPA
DN: 10 mm - 200 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C
... disc. Multi-position handle as standard feature for valves up to DN-100/4". Two-position handle as standard feature for valves starting from DN-100/4". Several models of easily interchangeable manual ...
INOXPA
... water valves, micro-valves, magnetic valves, mechanical valves, pneumatic valves. Check valves are available with various connections ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining