- Hydraulics - Pneumatics >
- Valve >
- Manual valve >
- Pfeiffer Vacuum
Pfeiffer Vacuum manual valves
DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C
... (air) or 3.5 LPM (water) Valves are offered in straight (T) and 90 degree (L) flow patterns. All valves are supplied with 1/8” FNPT inlet and outlet ports. Valve cartridges are ...
DN: 0.25 in - 0.75 in
Pressure: 0 psi - 250 psi
Temperature: -18 °C - 70 °C
ANVER’s two-way ball valves are compact and easy to use. Activated manually for basic on/off pressure control or vacuum applications, these durable ball valves provide a tight connection for optimal stop/flow ...
DN: 0.375 in - 1 in
Pressure: 0 psi - 250 psi
Temperature: -18 °C - 121 °C
... • Vented for easy manual vacuum release • Forged body design, extends the life of the ball valve • Optimum flow design. • Blow-out proof stem • Locking handle for added safety • More economical ...
DN: 0.125 in - 0.5 in
Pressure: 0 psi - 150 psi
Temperature: -18 °C - 70 °C
ANVER Slide Valves are manually controlled, 3-way functioning valves that vent the downstream vacuum or pressure when the valve is turned to the OFF position. This provides a simple, ...
DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C
... GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 4 mm - 25 mm
Pressure: 0 bar - 8 bar
Temperature: -10 °C - 100 °C
Diaphragm valve GEMÜ 650TL is a manual tapping valve with automatic closing function which is pneumatically operated. The "keep-closed" override of manual operation is ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C
The GEMÜ R677 2/2-way diaphragm valve has a low maintenance plastic bonnet and is manually operated. An integral optical position indicator is standard. The High-Flow valve body provides compact dimensions ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 8 mm - 150 mm
Pressure: 125 bar
Ball valve for food applications according to regulation EU1935/2004, EG 10/2011 and FDA. Three-piece body, pressure rating depending on nominal size up to PN125, ball floating, vacuum-tight. Bore Full and reduced bore Special ...
GEFA Processtechnik
DN: 12, 6 mm
Pressure: 0 bar - 500 bar
Temperature: -20 °C - 60 °C
C2.940 High-pressure shut-off valves C2.940 High-pressure shut-off valves max. operating pressure 500 bar nominal diameter: ND 6 and 12 temperature range: 40º ... + 100ºC ports: G1/4 or G1/2
Pressure: 350 bar
C2.940 Flow control valve with locking screw C2.940 Flow control valve with locking screw max. operating pressure 350 bar nominal diameter: ND 4 .. 12 ports: G1/8 .. G1/2
Pressure: 10 bar
Temperature: -30 °C - 130 °C
... casting iron which has a 10 bar working pressure and a working temperature that ranges from -30...130 C degree. The valve contains a hand and an actuated control. Meanwhile, airconditioning technology, ...
SMS-TORK
Temperature: -10 °C - 95 °C
Tork's T-PKV .W812 is a butterfly valve which is made up of PVC with an extensive pressure of 10 bar and a maximum temperature that ranges from -10 up to 95° C. The unit has EPDM,VITON for its seal. The butterfly valve ...
SMS-TORK
Pressure: 10 bar
Temperature: -30 °C - 130 °C
The TORK T-KV.W 1320 series wafer type butterfly valve is constructed using stainless steel materials for its base and AISI 316 or 304 for its disc fitting. It generates 10 bar pressure rating, and works under -30 to ...
SMS-TORK
DN: 50.8, 76.2, 127, 38.1 mm
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...
3-Way and 6-Way Ball Valves Like HILCO Transfer Valves, HILCO Ball valves provide uninterrupted flow during transfer of fluid. Unlike Transfer Valves, which are limited ...
DN: 1.5 in - 8 in
Pressure: 0 psi - 5 psi
Flow rate: 0 us gal/min - 2,000 us gal/min
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...
DN: 6, 14, 8, 10 mm
Pressure: -1 bar - 20 bar
Temperature: -30 °C - 130 °C
FEMALE RP ISO 7 - FEMALE RP ISO 7 VALVE The GHILUX miniature ballvaves have been created and engineered by Aignep in the 90’s. The supercompact dimensions and the excellent performance respond to the growing demand ...
AIGNEP
DN: 10, 6, 14, 8 mm
Pressure: -1 bar - 20 bar
Temperature: -30 °C - 130 °C
TAPER MALE R ISO 7 - FEMALE RP ISO 7 VALVE The GHILUX miniature ballvaves have been created and engineered by Aignep in the 90’s. The supercompact dimensions and the excellent performance respond to the growing demand ...
AIGNEP
DN: 5.5 mm
Pressure: -1 bar - 40 bar
Temperature: -15 °C - 180 °C
FEMALE RP ISO 7 - FEMALE RP ISO 7 VALVE The 66.000 serie is made of stainless steel AISI 316L function fittings: flow controls for cylineders, in-line and banjo fittings, unidirectional valve, quick ...
AIGNEP
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...
Pressure: 10 bar - 500 bar
max. operating pressure 500 bar, min. operating pressure 10 bar. Type of actuation: manual Application: For single acting cylinders. CETOP 3 adaptation.
DN: 6 mm
The hand valve provides bubble tight shut-off time after use. The valve is directly attached into the plate with O-ring seal.
DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 80 °C
... nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with ...
Praher Plastics Austria GmbH
DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -10 °C - 50 °C
... the union nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS ...
Praher Plastics Austria GmbH
DN: 10 mm - 80 mm
Pressure: 10 bar
Temperature: -10 °C - 50 °C
... the union nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS ...
Praher Plastics Austria GmbH
Temperature: 37 °C - 41 °C
Model SP157A is a scald protection bleed valve. Recommended for high ambient temperature locations where extreme heat or hot sun might cause internal water overheating. Flushes water through line when internal water temperature ...
Haws AG - Headquarters for Europe, Middle East and
DN: 32, 25, 63, 40, 20 mm
OMI Officine Meccaniche Industriali
DN: 6, 8, 4 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 80 °C
... CONTROL VALVES - WITH SWIVEL JOINT ► Configurable flow control valves for regulating the exhaust air ► Optimal for regulating the speeds during piston movements ► Angled version FLOW CONTROL VALVES ...
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ...
FIP - Formatura Iniezione Polimeri
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C
FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...
FIP - Formatura Iniezione Polimeri
DN: 65 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C
... developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required ...
FIP - Formatura Iniezione Polimeri
DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C
... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...
DN: 6 mm - 63 mm
Pressure: 350 bar
... provide an extensive range of male and female standard and super Staple-Lock ball valves with swivel females and the cost effective compact fixed female option. Ball valves are supplied with various handle ...
DN: 200 mm - 1,000 mm
Pressure: 10 bar - 16 bar
Temperature: 0 °C - 200 °C
Metso Mapag BO series butterfly valve is designed for Vacuum Pressure Swing Adsorption plants (VPSA). It is a wafer type, soft seated, high performance, single eccentric disc valve. The valve ...
Metso Automation
DN: 15 mm - 200 mm
Pressure: 16 bar - 40 bar
Temperature: 0 °C - 400 °C
Nominal diameter DN 15 .200 Nominal pressure PN 16,25,40 Body made of sph. cast iron EN -GJS-400-18-LT, EN-GP-240-GH Bellows seal (TA-Luft') with safety stuffing box High Kvs-values (favorable Zeta-values) High seat tightness External ...
DN: 8 mm - 50 mm
Pressure: 64 bar
... and ball made of 1.4408. Sealing material PTFE. Internal structure analogous to A-3BVGdc. H = height of centre axis to the hand lever-top. Diagram: X-hole is standard. We reserve the right to alter dimensions.
Schwer Fittings
DN: 5 mm - 22 mm
Pressure: 200 bar - 400 bar
Temperature: -60 °C - 200 °C
Forged. Housing Material: 1.4571, Spindle Material: 1.4571, Spindle Seal: PTFE, Hand wheel: pressed. Also available with NPT thread - on request. Temperature range: -60 ° C to 200 ° C. At elevated temperatures, please ...
Schwer Fittings
DN: 8 mm - 80 mm
Pressure: 64 bar
Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. We reserve the right to alter dimensions.
Schwer Fittings
DN: 160 mm - 1,000 mm
Pressure: 1, 0.9 bar
Temperature: -20 °C - 70 °C
Explosion Isolation Flap Valve CARZ - protective system. Explosion Isolation Flap Valve type CARZ is design as explosion pressure resistance equipment, which is able to prevent a transmission of dangerous ...
DN: 100 mm - 160 mm
The PV5G/PV5 Series ISO valves are pilot operated type 5-port valves in compliance with the ISO standards which regulate international valve mounting dimensions.Suitable for operating ...
CKD
DN: 50 mm - 1,400 mm
Pressure: 16 bar - 420 bar
... soft-seated trunnion mounted ball valves are designed according to API6D standard and be offered two-piece and three-piece split body designs. The valves can be applied in wide pressure and temperature ...
Athena Engineering S.r.l.
DN: 50 mm - 2,400 mm
Pressure: 16 bar - 420 bar
... eccentric butterfly valve, with two-way sealing zero leakage, small torque characteristics, metal sealing valve seat can make it suitable for all kinds of harsh working conditions, the eccentric design ...
Athena Engineering S.r.l.
DN: 50 mm - 2,400 mm
Pressure: 16 bar - 100 bar
... eccentric butterfly valve, using elastic pressure self-sealing valve seat structure, with two-way zero leakage and can achieve lower torque, reduce the cost of driving device procurement. Cam effect type ...
Athena Engineering S.r.l.
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
... Bi-directional zero leakage butterfly valve.ISO Pad for mounting, Gear Operator /ActuatorExtremely small play between the stem and disc due to ‘Double D’ drive.Accurate dual stem sealing prevents leakage.Butterfly valve ...
UFLOW AUTOMATION
DN: 50.8, 3, 4 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 140 °C
... Bi-directional zero leakage butterfly valve.ISO Pad for mounting, Gear Operator /ActuatorExtremely small play between the stem and disc due to ‘Double D’ drive.Accurate dual stem sealing prevents leakage.Butterfly valve ...
UFLOW AUTOMATION
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Butterfly Valve Bi-directional zero leakage butterfly valve.
UFLOW AUTOMATION
DN: 2 in - 8 in
Pressure: 0 bar - 284.4 bar
... FVF, a Foot Valve with Strainer and clean lever that make removing of debris easy. It is used in any water pump system pipelines, also served as a check valve function to prevent backflow. What is ...
Elite Line Industrial Corp.
DN: 0.5 in - 2 in
Pressure: 0 bar - 20 bar
Temperature: -15 °C - 80 °C
Model ATRF, This model include a manual lever for quick release action in urgent situations. Suitable for UL Fire protection and Fire Sprinkler air venting systems. Air Vent Valve for Fire Protection ...
Elite Line Industrial Corp.
DN: 2 in - 12 in
Pressure: 300 psi
Temperature: 0 °C - 80 °C
Model HBF-300G , UL Listed Grooved Type Butterfly Valve, cuts or regulates the flow of fluid through the piping systems. Grooved Type Butterfly Valve for fire protection serve as a control valve ...
Elite Line Industrial Corp.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining