Input voltage: 100 V - 240 V
Output voltage: 24 V
Power: 3 W
The FTR power supply is a switching mode power supply to be connected directly to the line proviiding na isolated output. It is suitable for powering instruments such ...
Input voltage: 100 V - 240 V
Output voltage: 24, 48 V
Current: 20, 10 A
... level 100% full load burn-in test 3 years warranty OVERVIEW NDR-480 is one economical slim 480W Din rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting ...
Lantech Communications Europe GmbH
Input voltage: 100 V - 240 V
Output voltage: 48, 24 V
Current: 5, 10 A
... immunity level 100% full load burn-in test 3 years warranty OVERVIEW NDR-240 is one economical slim 240W Din rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting ...
Lantech Communications Europe GmbH
Input voltage: 100 V - 240 V
Output voltage: 48, 24, 12 V
Current: 5, 10, 2.5 A
... immunity level 100% full load burn-in test 3 years warranty OVERVIEW NDR-120 is one economical slim 75W Din rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting ...
Lantech Communications Europe GmbH
Input voltage: 24 V - 28 V
Output voltage: 340 V - 550 V
Current: 0.85 A - 20 A
DC power supply, 3-phase, 125x128x86mm,, -30-70°C, Screw connection, IP20, Aluminum, Stabilized, Output voltage, pulsed Power supplies - Switching power ...
The compact Q.PS-PEL-240x power units with 24 VDC output voltage can be installed in a very restricted space and therefore the installation in cost-effective electrical distributor boxes in accordance with DIN 43880 ...
Input voltage: 48 V - 450 V
Output voltage: 10 V - 14 V
The DC-DC power module used to supply energy to all the electronic devices present in the vehicle. Generally designed using a ZVS full-bridge topology. This Kit includes: - Power planar ...
Input voltage: 12 V
Output voltage: 230 V
Current: 16 A
AC/DC power supply - Batt Pak Emission-free energy supplyfor our environment – for clean air _______ Mobile Power Supply for: * Electrical construction equipment * ...
Input voltage: 24 V
Output voltage: 4 V - 8 V
Current: 4 mA
CRY575 MIC power is a three-channel microphone power module that provides a constant current source for the IEPE preamplifier, as well as the positive/negative power for the dual-power ...
Input voltage: 115 V - 230 V
Output voltage: 25 V
DES Series Power Supplies are specially designed for the full range of Magtrol’s Eddy-current and Powder brake dynamometers with the design goal providing the best response time. The DES Series supplies ...
Input voltage: 120, 240, 250 V
Output voltage: 12, 24, 90 V
Current: 300, 1,000, 1,500 mA
... unregulated power supply that is designed for use with Magtrol’s Hysteresis Brakes and Clutches. The 5200 is available in either 12, 24 or 90 VDC voltages, corresponding to the available hysteresis brake/clutch ...
Input voltage: 120, 240 V
Output voltage: 24 V
Current: 0 mA - 1,000 mA
... closed-loop power supply to provide smooth application of current throughout an entire range up to a maximum set point. By utilizing regulated current, fluctuations in brake torque caused by temperature ...
Output voltage: 180 V - 528 V
Power: 15,000 W - 900,000 W
... processes take place in electric machines in order to ensure defined machine cycles. The generated energy is often burned up by braking resistors. KEB’s power supply ...
Input voltage: 5 V
Output voltage: 30, 60 V
Current: 0 A - 5 A
The Model AX503 offers dual 30V outputs with the ability to display both voltage and current for each output. Additionally, the Model AX503 offers a 5V blind output which is adjustable from 2.7 to 5.5V. Dual 30V outputs can be connected ...
Input voltage: 100 V - 240 V
Output voltage: 24 V
Current: 2.5, 15, 30, 6, 12 A
The PSR series power supplies are regulated DC power supplies capable of operating from 100-240 VAC input, 50/60 Hz. The PSR power supplies ...
Input voltage: 115 V - 230 V
Output voltage: 24 V
Current: 40 mA
Description: - Current loop power supply Power supply: - 115 / 230 Vac ± 10% 50 / 60 Hz Consumption: - 1,5 VA Stabilized output: - 24 Vdc 40 mA Operating temperature: ...
SENECA | Automation Interfaces
Input voltage: 24 V - 230 V
Output voltage: 24 V
Current: 50 mA
Description: - Current loop dual power supply Power supply: - 115 / 230 Vac (s100s-1-ST); 24 V (s100s-3-ST) Consumption: - 3,5 VA Output: - 2-CH stabilized output ...
SENECA | Automation Interfaces
Input voltage: 115 V - 230 V
Output voltage: -15 V - 15 V
Current: 350, 75 mA
Description: - Dual stabilized power supply Power supply: - 115 / 230 Vac ± 10%, 50-60 Hz Consumption: - 7,5 VA Output: - + 15 Vdc 350 mA; - 15 Vdc 75 mA Operating ...
SENECA | Automation Interfaces
Input voltage: 85 V - 265 V
Output voltage: 42.5 V
Current: 5.6 A
When a power outlet is available near the CP120B or CP160B generators, a specific mains power supply can be used to directly power the generators without having to use ...
Input voltage: 110, 220 V
Several universal AC adapters / chargers for Mark-10 force gauge and torque gauges are available, each of which consists of a body and replaceable prong. Spare prongs are also available.
Input voltage: 0 V - 50 V
Output voltage: 15, 24 V
... instrumentation and thermal mass flow meters and mass flow controllers, announces the release of the THCD-401 four channel power supply, controller, and display which can be used to operate mass flow ...
Input voltage: 115, 230 V
Output voltage: 18 V - 23 V
Current: 4 mA - 20 mA
• Multiple power supply electronically up to four two-wire transmitters • Isolation of each circuit with each other protected against short circuits • Plastic housing for mounting on a 35 mm DIN-rail ...
Current: 45 A
Power: 3,300, 10,000 W
Output frequency: 50, 60 Hz
... as well as reliability and flexibility are key features of success in advanced production. The advantages of contactless power supply are in the low wear and maintenance characteristics, insensitivity ...
Input voltage: 36 V - 72 V
Output voltage: -12 V - 12 V
Current: 12 A
... Hot-Swappable Redundant Power Supply Key Features PICMG® 2.11 CompactPCI® Power Interface compliant 6U CompactPCI® 8HP form factor PICMG® 2.11 47-pin CompactPCI® ...
ADLINK TECHNOLOGY
Input voltage: 120 V - 240 V
Output voltage: 24 V
Current: 2.1 A
Enclosed Laptop Type Power Supply ideal for desktop testing of SmartMotors™ This power supply connects directly to: CBLSM1-DEMO SmartBox™ SmartBoxBCD™ It ...
Input voltage: 100 V - 240 V
Output voltage: 12 V
Current: 1.5 A
Power supply with AC-DC plug-in type converter in switching technology. - Protection: overload, temperature - Cable length: 1m - Dimensions: 59.3x30.7x75.6mm - Weight: 128g - HS code: 85044050
M.A.E. S.r.l.
Input voltage: 115, 230 V
Output voltage: 15 V
Current: 1,600 mA
AC-DC power supply plug-in type converter in switching technology, 15V, 1600 mA, 24 watt Depth: 75 mm Height: 74 mm Widt: 43 mm Status: ErP livello 2 Connector: Spina 5,5/2,1 Tipology: ...
M.A.E. S.r.l.
Input voltage: 115 V - 230 V
Output voltage: 5 V
Current: 1,500 mA
Charger 1 USB 1500 mA european plug 1 pins interchangeableplugs for universal use Switching power supply plug type Double coating Compact structure Protection againist shortcuit and overload EU ...
M.A.E. S.r.l.
Input voltage: 120 V - 227 V
Output frequency: 50, 60 Hz
PS350XA5 power pack is the heart of the low voltage sensor system. It transforms 120, 240 or 277 volts to power the remote sensors.
Input voltage: 115 V - 230 V
Output voltage: 0 V - 30 V
Current: 0 A - 5 A
The PeakTech 6015 is a linearly regulated, stabilized laboratory power supply with a safety transformer. Its large analog displays enable the set output values to be read quickly and precisely. Due ...
Input voltage: 190 V - 255 V
Output voltage: 24 V - 220 V
Power: 550 W - 2,200 W
Features: This device with built-in 2pcs 12V/12AH battery.Ensure the DC power supply is working normal and continuously when the AC supply is power failure. The ...
U-Therm International (H.K.) Limited
Input voltage: 190 V - 255 V
Output voltage: 24 V - 220 V
Power: 200 W - 400 W
... alarm signal and stop the DC output automatic to protect the battery. When the AC power supply is regular working, the device automatically power recover and the ...
U-Therm International (H.K.) Limited
Input voltage: 190 V - 255 V
Output voltage: 24 V - 220 V
Power: max 400.0 W
... alarm signal and stop the DC output automatic to protect the battery. When the AC power supply is regular working, the device automatically power recover and the ...
U-Therm International (H.K.) Limited
Output voltage: 0 V - 140 V
Power: 30 W
... PTE-50-CE Pro. CHARACTERISTICS Voltage: 0 – 140 Vac Phase angle: 0 – 359.9º Frequency: 40 – 70 Hz Power: 30 VA Automatic protection against overload and overheating Powered from the ...
Input voltage: 110 V
Output voltage: 0 V - 140 V
Power: 30 W
... PTE-100-C Plus model. CHARACTERISTICS Voltage: 0 – 140 Vac Phase angle: 0 – 359.9º Frequency: 40 – 70 Hz Power: 30 VA Automatic protection against overload and overheating Powered from the PTE-100-C’s ...
Input voltage: 115, 230 V
Output voltage: 48, 125, 250 V
Current: 0.24, 0.48, 1.25 A
Auxiliary DC Voltage Source The DC power supply PTE-FCG is designed as an accessory for the PTE range, although the unit operates independently as a stand-alone unit. There are ...
Input voltage: 230 V
Output voltage: 24 V - 200 V
Power: 125 W - 1,500 W
These equipment are DC power supply for electromagnetic chucks. They are used to magnetize an demagnetize the chucks. In addition, while demagnetizing the chuck, they carry out a process that removes ...
Please specify:
Help us improve:
remaining