PILZ analog I/O

The Eckelmann I/O system adapts to your application. From simple digital input, to analog modules, to special and safety modules for high-end applications, the UBM I/O system offers everything ...

Analogue inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs. The design of the cards allows their use at any position in the device. If ...

... sensor defects due to early break detection for analog voltage inputs KeConnect C5 Analog voltage inputs: AI 570, AI 571 Analog current inputs: AI 575, AI 576 Analog ...

... 301 V4.01 application layer A PC board-mounting card for adding I/O to a CAN distributed control network. The CAN-IPM-01 combines configurable digital I/O points with dedicated analog ...

... card is a software-configurable expansion card with four analogue inputs. The analogue I/O module can be configured for four voltage ranges: 0 to 5V, –5 to +5V, 0–10V and –10 to +10V. ...

... is a Bus Terminal EtherCAT® designed to connect the operation signals within the EtherCAT network. It comprises of different I/O modules and a bus coupler. The Ventura FIO bus coupler changes the transmission physics ...

... digital I/O expansion modules, an analog I/O expansion module is also available. By using RevPi AIO, a Revolution Pi system is expanded by 4 analog inputs, 2 analog ...

... inputs, 16 Digital outputs, 10 Analog inputs, 4 Analog outputs, and 1 magnetic pickup input. MX5-R2 is backward compatible all models of the MX5. Any mix of MX-Series modules can be added to enable ...

Voltage, current, resistance, potentiometer, RTD, thermocouple, strain gage (full-, half-, and quarter-bridge configuration), IEPE High-accuracy digitization 24-bit ADC, 100 kHz sample rate per channel Status, trigger, tare, ...

Get multivariable outputs and a powerful configuration and maintenance interface in a convenient, easy-to-install package. This smart module provides fast access to flow, density, temperature and many other parameters. Features ...

... safety. All of the I/O module’s transmission channels are conductively connected to each other. The ANTARES 8AI Remote I/O Module is operated by and supplied with power by the ANTARES Rail Control Unit ...

-Designed specifically for Remote I/O Systems -System sizes from 2 to 15 I/O modules per CPU -Easy configuration using free software utility. -Automatic I/O module identification and ...

CEDIO-P 24/24/2 With 48 digital I/O and 2 analog outputs on board it is the controller with highest I/O packing density.

FSoE-Slave module with Analog Option for safe speed and position of up to 2 axes for further evaluation in an FSoE master module. 14 Safe digital inputs 4 Safe pp-switching semiconductor outputs - switchable ...

... from each other. Extension modules can also be added. Compact I/O module for connection to controllers with a CAN master Up to 32 digital I/O signals or 16 digital and 8 analog I/O ...

Measuring input for Standard Signals, Modbus RTU Input for Standard Signals 0-20 mA, 4-20 mA, 0-10 V, 0-5 V In-Rail-Bus Connector for Modbus and power supply Protective Separation up to 300 V AC/DC, test ...

PCI 16 DAC with isolation, 16DI, 16DO Board,Cable Socket CA-4002x1 System Architecture System Bus Universal PCI Analog Output Channels of analog input 16 Current ...

... wireless radio transmission of pulse signals for gas, water, electric and BTU meters with an S0 interface. • Application/type : I/O module • Purpose : Gateway, Measure values • Interface : EnOcean (868 MHz) • Configuration ...

TigoMaster 2TH is an industrial-grade IP67 IO-Link Wireless Master platform. It has two IO-Link Wireless tracks, supporting up to 16 IO-Link Wireless devices simultaneously. The TigoMaster ...

KNX Binary Input is used to interface the contacts to KNX bus substructure such as push buttons, switches etc. to make them communicating devices. The thermostat feature can be utilized with an internal or external temperature. Main ...

Base Station interface All standards (P25, TETRA, LTE, GSM-R ...) Modular RF sections (up to 4 bands) 8 optical interfaces Redundancy configurations 2 x 1 Gbps Ethernet interface IP66/NEMA ...

... -channel or nine-channel variants—offers high-speed synchronous sampling for analog inputs, with dedicated analog input hardware that includes amplifiers, filters, and analog-to-digital ...

The µCAN.4.ai-BOX is an extended universal measurement module for the acquisition of analogue standard signals. The device is designed for measuring signals of +/- 10 V, 0…20 mA or 4…20 mA. The CAN interface supports ...

... remote I/O platform with seamless integration, functionality, and low cost in mind. OCS-I/O is a modular I/O system for OCS offering a fieldbus network (CsCAN). It is a flexible I/O system ...

2-channel 1-wire leading edge phase control dimmer for controlling conventional incandescent lamps, HV and LV halogen lamps (with conventional transformer), dimmable LEDs and inductive loads (e.g. fans) Description The brightness of ...