- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Nozzle >
- PLYMOVENT
PLYMOVENT nozzles
Orifice diameter: 1 in
Flow: 25 l/min - 250 l/min
Pressure: 6 bar
... that any debris is flushed from the nozzle to avoid pattern disruptions or flow reductions. All the models include a pressure eliminator for ease of flow settings at different pressures. Stream Pattern: The nozzle ...
Tipsa
Orifice diameter: 0.5 in
Flow: 25 l/min - 950 l/min
Pressure: 6 bar
... conditions. The FLUSH mode is used to ensure that any debris is flus- hed from the nozzle to avoid pattern disrup- tions or flow reductions. Stream Pattern: The nozzle stream is adjusted by rotating ...
Tipsa
Orifice diameter: 2, 1, 1.5, 2.5 in
Flow: 19 l/min - 1,000 l/min
Pressure: 6 bar
... for a quality fog pattern. Foam: The VIPER® SG nozzle can be used as an aspirating foam nozzle with the addition of inline eductors and foam tubes. Inlet Options: The VIPER® SG selectable flow nozzles ...
Tipsa
Orifice diameter: 0.8, 1.2, 1.5, 1.8 mm
Flow: 95 l/min - 375 l/min
Pressure: 4, 6, 8 bar
... or 70 mm. It is ideal for robotised cleaning operations in production, where a single-axis movement of the nozzle is sufficient. The nozzle can be coupled to an ionisation system to remove electrostatic charges.
Flow: 70, 110, 190 l/min
Pressure: 2, 3, 1 bar
Media temperature: 0 °C - 50 °C
Rotary Nozzle with AC Static Eliminator for Dust Removal and Ionisation • Wide area covarage by rotating the nozzle with high speed • Tungsten pins for extreme high lifetime • Cleaning areas by using ...
FÖGE Elektronik GmbH
Flow: 100 l/min - 110 l/min
Pressure: 4 bar
Media temperature: 0 °C - 50 °C
Rotary Nozzle with AC Static Eliminator for Dust Removal and Ionisation • Wide area covarage by rotating the nozzle with high speed • Tungsten pins for extreme high lifetime • Cleaning areas by using ...
FÖGE Elektronik GmbH
Flow: 215, 290, 375 l/min
Pressure: 4, 6, 8 bar
Media temperature: 0 °C - 50 °C
Rotary Nozzle with AC Static Eliminator for Dust Removal and Ionisation • Wide area covarage by rotating the nozzle with high speed • Tungsten pins for extreme high lifetime • Cleaning areas by using ...
FÖGE Elektronik GmbH
As an alternative to BL industrial atomisers with pump and control unit, Mantis also offers hand-held spraying units, which are ideal for flexible use on smaller surfaces and are extremely portable. Since 2014, it has been possible ...
Mantis ULV
As an alternative to BL industrial atomisers with pump and control unit, Mantis also offers hand-held spraying units, which are ideal for flexible use on smaller surfaces and are extremely portable. Since 2014, it has been possible ...
Mantis ULV
As an alternative to BL industrial atomisers with pump and control unit, Mantis also offers hand-held spraying units, which are ideal for flexible use on smaller surfaces and are extremely portable. Since 2014, it has been possible ...
Mantis ULV
Spray nozzles Eductor nozzle Misting nozzles Washing - cleaning nozzles
The liquid is sprayed when coming into contact with the vibrating surface. The ultrasonic nozzle produces droplets or particles of mastered size: the higher the ultrasonic frequency, the smaller the aerosol particles ...
The ultrasounic technology produces an acoustic wind phenomenon in front of the probe without gas displacement: the focusing of the acoustic waves produced by the probe creates a pressure field at a few centimeters distance. This pressure ...
Orifice diameter: 0.2 mm - 1.6 mm
Low Flow Rate Fine Fog Nozzles/ Flat Spray BIMV series Features • Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less (*3). • Features large turn-down ...
H. IKEUCHI & CO., LTD.
Lance Nozzle, good for complete evaporation in cooling tower, large volume is also effective for dust suppression. Features • Pneumatic spray nozzle producing fine atomization with a mean droplet ...
H. IKEUCHI & CO., LTD.
Orifice diameter: 0.2 mm - 5.8 mm
Standard Flat Spray Nozzles - One-piece Structure with Ceramic Tip Even Spray Distribution Features • Flat spray pattern with uniform distribution throughout pattern area. • Even spray impact across ...
H. IKEUCHI & CO., LTD.
Concentric tube nozzles for air/oil lubricated systems, mainly for MQL etc.
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
WS single nozzle can accurately spray to the lubrication point position to achieve precise lubrication.
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
WD dual nozzles, the center distance of the dual nozzles is 7, 9, 11mm, whichWD dual nozzles, the center distance of the dual nozzles is 7, 9, 11mm, which can be accurately ...
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
Orifice diameter: 0.5 mm - 3.5 mm
Flow: 50 l/min - 5,000 l/min
Pressure: 40 bar - 350 bar
... loss through the nozzle. - Smaller and lighter compact design which is more durable, easy to clean and can be rapidly stripped down and reassembled. - No wrenches or tools are required to install the nozzle. - ...
DELAVAN France
... required. Large flow passages greatly reduce clogging. CONSTRUCTION AND MATERIALS Three part construction: Nozzle body - Brass or 303 Stainless Steel. Thread sizes:3/4"-20 UNEF on No. 30615 and 11/8"-18 ...
DELAVAN France
... atomising series spray nozzles offer the user a wide variety of spray patterns, flow rates and atomisation. Unlike hydraulic or pressurized nozzles where the energy from the pressure of the liquid is ...
DELAVAN France
Screwed single nozzles IHR nozzles differ in 4 categories: . Single standards . Individual Eco-Line . Individual mini- molds . Multi-tip Thanks to the different solutions, iHR Solution is ...
iHR srl
The screwed single nozzles IHR nozzles differ in 4 categories: . Single standards . Individual Eco-Line . Individual mini- molds . Multi-tip Thanks to the different solutions, iHR Solution ...
iHR srl
The screwed single nozzles IHR nozzles differ in 4 categories: . Single standards . Individual Eco-Line . Individual mini- molds . Multi-tip Thanks to the different solutions, iHR Solution ...
iHR srl
Orifice diameter: 4, 8, 15 mm
... internationally patented Variacor® system enables you to assemble spraying systems quickly and easily as well as adjusting nozzle positions efficiently. Economy: You don't waste time calling a piping specialist or ...
INDUSTRIAL SPRAY NOZZLES - AIR ATOMISING FEATURES Fine atomisation in a wide range of flow rates Spray angle is wider than most external mix nozzles. Air Flow M³/Min is lower than most external mix ...
DELAVAN SPRAY TECHNOLOGIES
INDUSTRIAL SPRAY NOZZLES - DELA-FIT SPRAY CHARACTERISTICS Uniform distribution of droplets in a wide angle solid cone spray pattern. Droplet size larger than in hollow cone nozzles of equal capacity. Pressure ...
DELAVAN SPRAY TECHNOLOGIES
... close to the nozzle orifice. For small capacity tips up to say 8 litres/hour the angle falls off rapidly a few inches from the tip. The larger the tip size the further the nominal angle ...
DELAVAN SPRAY TECHNOLOGIES
Media temperature: 470 °C
After eroding the gate bushing, it must be annealed to remove stress
GÜNTHER Heisskanaltechnik
Orifice diameter: 0.4, 0.6, 0.8, 1 mm
Cold runner system valve gate nozzle Melt channel diameter 4.8 mm One cooling circuit supplies up to four nozzles. The following parts are included in the scope of delivery: - Plug-in cooling ...
GÜNTHER Heisskanaltechnik
Orifice diameter: 4.8 mm
Media temperature: 0 °C - 45 °C
Hot runner nozzle Open single nozzle with thick-film heating element (BlueFlow®) Operating voltage 230 VAC Volt Alternating Current - Wechselstrom Heating element tubular Nozzle ...
GÜNTHER Heisskanaltechnik
Orifice diameter: 4 mm
Multi-directional nozzles Dual direction Multi-directional double balls Extended ball socket, dual direction adjustment For CNC lathes and centres with high-pressure pumps
Orifice diameter: 15 mm
Product Description welding nozzle A10.5 for 15mm sheets
HSK Kunststoff Schweißtechnik GmbH
Product Description welding nozzle A3.5 for 5mm sheets
HSK Kunststoff Schweißtechnik GmbH
Product Description welding nozzle A5.6 for 8mm sheets
HSK Kunststoff Schweißtechnik GmbH
Orifice diameter: 4 mm - 8 mm
Thread Mount Type The Coolant Spray Nozzle could easily adjust its direction and spray precisely. BA90102020001A Thread Mount: PT 1/8 L: 20 L1: 10 D1: 6 D2: 5 d: 4 H: 17 BA90102020002A Thread Mount: PT ...
Orifice diameter: 3 mm - 4.4 mm
The Coolant Spray Nozzle could easily adjust its direction and spray precisely. When the coolants correspond with three pressures-low, medium and high pressures, it can precisely aim at workpiece. They are suitable for ...
Leak Lock Type (Alloy Steel) Special design for avoiding oil leaking. Not delaying spraying fluid which prolongs the longevity of the tool holders. SPECIFICATIONS BA90104020001A Thread Mount: PT 1/8 L: 40 L1: 10 L2: 18 D1: 6 D2: ...
Available as threaded or non-threaded and come in many different shapes and sizes for...
Orifice diameter: 0.25 in - 0.38 in
Flow: 2.3 m³/h - 5.7 m³/h
Pressure: 1, 0.2 bar
The DD 106 discharge nozzles in the neXt® product family are designed to fit existing ball heads of 1/4" Ariana articulated hoses. This means that you may, for instance, extend your existing articulated hose system ...
KERSTEN Elektrostatik
Orifice diameter: 0.25 in
Flow: 2.3 m³/h - 5.7 m³/h
Pressure: 0.5 bar - 2.5 bar
The DD 206 and DD 206 (A) discharging nozzles are flow-optimised. A greater electrostatic discharge reach and cleaning effect on the material to be discharged may be achieved with the additional support of compressed ...
KERSTEN Elektrostatik
Flow: 3.7 m³/h - 9.45 m³/h
Pressure: 0.2 bar - 2.5 bar
Media temperature: 5 °C - 80 °C
Discharging Nozzles, Antistatic, The DD 306 and DD 306 A discharging nozzles in the neXt® product family are flow-optimised. Due to their short design, they are, among others, used in areas requiring ...
KERSTEN Elektrostatik
Nozzle nr 3 Material thickness 10-25 mm Gas consumption OX: 2150nl/h, AC: 520nl/h
Media temperature: 450, 350, 320 °C
Heating nozzles for injection machines and molds, hot melt application, similar spray gun, especially in cases where they are available for mounting in limited areas DESCRIPTION: • Power dissipation: up to 5.5 W / ...
Media temperature: 350, 450 °C
Electrical resistance brass injection nozzle, injection nozzles. Nozzle band heater brass tube Diameter = 30mm Height = 22mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm Cable ...
Spray nozzle SD 16: precision application of fluid media The SD 16 ensures you are able to apply the thinnest films of media such as low-viscosity oils and release agents with precision. For example, the pneumatically ...
Orifice diameter: 10 mm - 500 mm
Pressure: 1 bar - 6 bar
flatBLOW – Ion blower nozzles for almost any application In our product group flatBLOW you can find all Eltex flat blower nozzles. From narrow to wide to angled nozzles, everything ...
Eltex-Elektrostatik-GmbH
Orifice diameter: 10 mm - 150 mm
Pressure: 1 bar - 6 bar
roundBLOW – Ion blower nozzles for almost any application In our product group roundBLOW you can find all Eltex round blower nozzles. From the cannula to the diameter Ø 19mm. The basic body R36E is ...
Eltex-Elektrostatik-GmbH
Orifice diameter: 10 mm - 150 mm
Pressure: 2 bar - 6 bar
... . Static adhering dust is discharged and blown off by a rotating nozzle with two air outlets. The rotation creates a pulsating effect. The nozzle diameter and the angle of the air nozzles ...
Eltex-Elektrostatik-GmbH
The Triple Click Nozzle that was developed by Dosanova replaces the traditional foam, rinse and desinfection nozzle. Just by turning the head 120° the operator can easily switch between the 3 nozzles ...
Dosanova bvba
The Triple Click Nozzle that was developed by Dosanova replaces the traditional foam, rinse and desinfection nozzle. Just by turning the head 120° the operator can easily switch between the 3 nozzles ...
Dosanova bvba
FOAM/RINSE/DISINFECTION NOZZLE Stainless steel nozzles with ST3100 Nipple
Dosanova bvba
Orifice diameter: 0.5 in - 1 in
Flow: 80 l/min
Pressure: 3 bar
Nozzle made of polypropylene Housing and internal parts made of polypropylene, valve seat and O-rings made of FKM or EPDM, spring of hastelloy 2.4610, rotatable hose connection. Viscosity: 800 mPas*
Dr. Jessberger GmbH
Orifice diameter: 0.5 in - 1 in
Flow: 80 l/min
Pressure: 3 bar
Housing and internal parts made of polypropylene, valve seat and O-rings made of FKM or EPDM, spring of Hastelloy 2.4610, rotatable hose connections.
Dr. Jessberger GmbH
Orifice diameter: 1, 0.75 in
Flow: 100 l/min
Pressure: 2 bar
Housing and internal parts made of white polypropylene, valve seat and O-rings made of NBR, spring made of stainless steel.
Dr. Jessberger GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining