Water nozzles

Orifice diameter: 0.4 mm - 6 mm
Flow: 0.9 l/min - 155 l/min
Pressure: 3 bar - 20 bar

GE FLAT FAN NOZZLE – DISC NOZZLE In GE flat fan nozzle (thickness 1.2 mm), the spray jet is close to the turbulence structure and this special design makes them very easy to clean. ...

Orifice diameter: 0.7 mm - 5.2 mm
Flow: 4.5 l/min - 268 l/min
Pressure: 80 bar - 400 bar

The water path of the nozzle orifice has been redesigned completely to reduce energy losses caused as a result of turbulence, the elimination of all sharp cross section changes has resulted in a significant ...

Orifice diameter: 2 mm - 5.2 mm
Flow: 16.2 l/min - 268 l/min
Pressure: 80 bar - 400 bar

... nipple and nozzle tip assures for correct alignment of the nozzle onto the spray manifold. Several nipples length value and a specific locknut allow for a wide choice of different assembly ...

Orifice diameter: 49 mm
Flow: 60.8 l/min
Pressure: 500 bar

... round jet with the area performance of the flat jet. Applications with hot water up to 100°C can be carried out at any time. Orbimaster nozzles can be connected to the standard 9/16" nozzle ...

Orifice diameter: 40 mm
Flow: 42.9 l/min
Pressure: 800 bar

... round jet with the area performance of the flat jet. Applications with hot water up to 100°C can be carried out at any time. Orbimaster nozzles can be connected to the standard 9/16" nozzle ...

Orifice diameter: 40 mm
Flow: 180 l/min
Pressure: 1,500 bar

... round jet with the area performance of the flat jet. Applications with hot water up to 100°C can be carried out at any time. Orbimaster nozzles can be connected to the standard 9/16" nozzle ...

Flow: 200 l/min
Pressure: 2 bar - 8 bar
Media temperature: -25 °C - 80 °C

... suctioning and spraying as much fluid as possible, this atomizer is just the right one. It is ideal for scent spraying lines, water humidifying units indoors, or for direct irrigation e.g. of wood. An uncomplicated, functional ...

Flow: 128 l/min
Pressure: 3 bar - 8 bar
Media temperature: -25 °C - 80 °C

... Measuring examples of suction volumes in 1 min. at 20 °C: ISOVG150 4.5 ml at 6 bar ISOVG150 2.4ml at 3 bar Water 114 ml at 6 bar Water 48 ml at 3 bar

Flow: 135, 152 l/min
Pressure: 2 bar - 8 bar
Media temperature: -25 °C - 80 °C

"Full force ahead!" When it comes to covering a large surface from a short distance this atomizer is just the right one to use. Its compact design is ideal for tight spaces. Two stray channels provide a large spray angle and an elliptical ...

... effective cleaning device for superior hygienic cleaning of tanks or vessels. The device has been in use for several decades and is well enhanced to ensure best cleaning results, product safety and significant contribution ...

Cooling Tower Spray Water Nozzle Uniform distribution of water is the main factor for maintaining the cooling tower efficiency. Latino's cooling tower nozzles ensure ...

Orifice diameter: 1 in
Flow: 19 l/min - 250 l/min
Pressure: 6 bar

... pattern called RYLSTATIC®. RYLSTATIC® is a system that gives you a uniform water fog with smaller water droplets and less friction loss than other traditional systems. VIPER ATTACK nozzles ...

Orifice diameter: 0.5 in
Flow: 25 l/min - 950 l/min
Pressure: 6 bar

... - lled RYLSTATIC®. RYLSTATIC® is a system that gives you a uniform water fog with smaller water droplets and less friction loss than other traditional systems. VIPER BLUE DEVIL nozzles ...

Orifice diameter: 1 in
Flow: 19 l/min - 230 l/min
Pressure: 6 bar

... for a quality fog pattern. Foam: The VIPER® SG nozzle can be used as an aspirating foam nozzle with the addition of inline eductors and foam tubes. Inlet Options: The VIPER® SG selectable flow nozzles ...

Orifice diameter: 0.15 mm - 0.6 mm

... cone spray/ Extremely fine fog and ultra-low flow rate KB series nozzles Features • Ultra-small capacity hollow cone spray nozzle with the finest atomization among hydraulic nozzles. • ...

Orifice diameter: 0.13 in - 3 in

... machineries, tanks, steels • Spraying: Waste water treatment, aeration, foam breaking, fire extinguishing, dust suppression, sea water desalination, etching, chemical treatment Industries in which ...

Orifice diameter: 0.4 mm - 0.8 mm

[Made to Order Products] Features • Full cone spray pattern with a round impact area. • Wide spray angle provides larger spray coverage. • Ideal for fire extinguishing, fire prevention, dust suppression. Applications • Fire ...

... manufactured by ACF®, is a blast nozzle that functions as a normal and dust free blasting that is adapted in all of the different types of blasters that is equipped with a nozzle holder. In addition, ...

Orifice diameter: 1.2 mm - 21 mm

The RA type is a hollow coned spray nozzle that generates uniformed spray dispensation. Coarse particles are reduced to a fine spray and fine droplets are eradicated. Possessing a nominal spray angle that ranges from ...

... free passageway • Self-aligning tip using the 3/4” dovetail design as the Delavan AD nozzle • 5% overlap required • Orifice in line with dovetail - no off-set required Construction and Materials • Dovetail ...

... Kit-One units with H.L. nozzles. - A universal system, in kit form, for permanent or semi-permanent siting in polythene-clad structures, under glass or on open ground. - For interconnection and initial connection from ...