Water rotary unions

Pressure: 0 bar - 515 bar
Rotational speed: 0 rpm - 500 rpm

... mounting the union to an interface. GP 2-passage models with BSPP thread connections are not available with O-ring face seal glands. Need to combine fluid with electrical power, signal and/or data transfer? No problem. ...

Pressure: 0 psi - 150 psi
Rotational speed: 0 rpm - 30 rpm

... 2-passage rotary union designed to supply a water/glycol mixture from truck-mounted chillers to a rotating turret deck to cool electronics aboard the nation's fastest ...

Pressure: 0 bar - 515 bar
Rotational speed: 0 rpm - 300 rpm

DSTI 2-passage SE Series rotary unions are designed for applications with high pressure requirements and tight spatial constraints and feature two independent flow passages. SE 2-passage models come ...

Pressure: 15, 100, 750 psi
Rotational speed: 0 rpm - 1,500 rpm
Nominal size: 0.75 in

... Self-supported rotating union Radial housing connection Balanced mechanical seal 3 vent holes Forged brass housing Stainless steel rotor Special options: threaded vent holes, low torque design Seal Combinations: Standard: ...

Pressure: 15, 100, 750 psi
Rotational speed: 0 rpm - 3,500 rpm
Nominal size: 0.75 in

... Self-supported rotating union Radial housing connection Balanced mechanical seal 3 vent holes Forged brass housing Stainless steel rotor Special options: threaded vent holes, low torque design Seal Combinations: Standard: ...

Pressure: 100, 15, 750 psi
Rotational speed: 0 rpm - 3,500 rpm
Nominal size: 0.75 in

... Self-supported rotating union Radial housing connection Balanced mechanical seal 3 vent holes Forged brass housing Stainless steel rotor Special options: threaded vent holes, low torque design Seal Combinations: Standard: ...

Pressure: 0 bar - 350 bar
Rotational speed: 15,000 rpm
Nominal size: 15 mm - 360 mm

... is a compact rotary union with hydrostatically aligned radial clearance seals. Usable in a wide variety of applications, such as clamping in tooling machines or as a coolant to screw extruders, this ...

Pressure: 0 bar - 200 bar
Rotational speed: 0 rpm - 100,000 rpm

... operation as well. Various connection variations are available. Function and Design The Rotodisk S series are axial rotary unions with hydro-statically released contact seals and an automatic alignment ...

Pressure: 250 bar
Rotational speed: 4,000, 10,000, 6,000 rpm

GAT Rotodisk SW series rotary unions have a radial coolant supply. They have a very compact cartridge design. They can handle pressure of 70 bars at 6000 rpm. The unions are single-channel ...

Pressure: 8,000,000 Pa
Rotational speed: 0 rpm - 10 rpm
Nominal size: 0.1 in - 3 in

Rotary unions are electronic tools allowing single or multiple liquids to be conveyed from a stationary to a rotary part guaranteeing a completely productive lock between the two pieces. ...

Pressure: 0 bar - 80 bar
Rotational speed: 0 rpm - 20 rpm
Nominal size: 0.1 in - 6 in

Description: With their simple design, these connections allow you to carry your fluids up to 100 bar pressures while ensuring either an oscillating movement or a continuous rotation of a few rpm. Activities: – Food – Construction, ...

Pressure: 0 bar - 350 bar
Rotational speed: 0 rpm - 5 rpm
Nominal size: 8 mm - 49 mm

Rotary unions are electronic tools allowing single or multiple liquids to be conveyed from a stationary to a rotary part guaranteeing a completely productive lock between the two pieces. ...

Pressure: 0 bar - 20 bar
Rotational speed: 20 rpm
Nominal size: 0.5 in - 4 in

... Up to 20 bar (290 Psi) Up to 120°C (248°F) Sealing system: Mechanical seal Steel industry - Roll mill - Cooling water Other configurations on request Technical data Ready to be built-in For ...

Pressure: 0 bar - 12 bar
Rotational speed: 0 rpm - 10 rpm
Nominal size: 0.5 in - 2 in

Positioning rotating union for flexible hose orientation Available in several materials Positioning use or non-continuous slow rotation processes Medias : Gas / Non-abrasive liquid ...

Pressure: 0 bar - 16 bar
Rotational speed: 0 rpm - 15 rpm
Nominal size: 2 in - 6 in

Positioning use or non-continuous slow rotation processes Non-abrasive liquid / Gas (Vacuum and abrasive liquid) 2” to 6” Up to 16 bar (232 Psi) - Flange dimension may impact Up to 120°C (248°F) / ...

Pressure: 17 bar
Rotational speed: 100 rpm

4-Way Hybrid rotation in the nominal 4 + 5. Steam and condensate in 4 + 5, time round air and water over small nominal widths. Execution as a prototype for the tobacco industry.

Pressure: 50 bar
Rotational speed: 3,500 rpm
Nominal size: 0.25 in - 2 in

... silicon carbide seal (standard seal) D-model: silicon carbide/silicon carbide seal (for applications with poor filtration water, or abrasive fluids) ballbearings (can be relubricated) robust and less influence ...

Pressure: 50 bar
Rotational speed: 3,500 rpm
Nominal size: 0.25 in - 2 in

The 7200 series consists of rotating joints rotarion that are suitable for applications that require stainless steel components in the water. It consists of N-model, made from carbon graphite or silicon ...

Pressure: 0 bar - 650 bar
Rotational speed: 0 rpm - 100 rpm

RotaVariacor rotary joint The company MID VARIACOR, sells a range of fittings to optimize the cost of the function "rotary joint" for simple applications without severe technical constraints. ...

rotativ joint multi ways until 600 bar for oil, hot water...

Pressure: 250 bar
Rotational speed: 160 rpm

... With additional slide bearings The rotary joints are made of high strength aluminum and the rotary piston is made of hardened stainless steel. They are used where media must be passed ...

Pressure: 0 bar - 450 bar
Rotational speed: 0 rpm - 250 rpm
Nominal size: 6 mm - 25 mm

10 Series Multi Channel Rotary JointsMedium: Air, Hydraulics, Vacuum, Water, Gases, All Kinds of LiquidsPort Size: 1/8″ (DN06) – 1″ (DN25)Port#: 2-12 Ports Standard-Self supported design-Radial hose connections ...

Pressure: 0 bar - 450 bar
Rotational speed: 0 rpm - 250 rpm
Nominal size: 6 mm - 25 mm

10 Series Multi Channel Rotary Joints Medium: Air, Hydraulics, Vacuum, Water, Gases, All Kinds of Liquids Port Size: 1/8″ (DN06) – 1″ (DN25) Port#: 2-12 Ports Standard -Self supported ...

Pressure: 0 bar - 10 bar
Rotational speed: 0 rpm - 100 rpm
Nominal size: 8 mm - 50 mm

50 Series Rotary Joints & Rotary Unions Medium: Water Size: 1/4″ (DN08) – 2″ (DN50) – Self supported rotary joint – ...

Pressure: 0 bar - 13 bar
Rotational speed: 0 rpm - 3,500 rpm
Nominal size: 0.4 in - 6 in

The RX rotary union features a balanced seal and carbon-to-tungsten carbide seal package that makes the RX rotary union more robust and able to run longer than other ...

Pressure: 0 psi - 7,000 psi
Rotational speed: 0 rpm - 300 rpm
Nominal size: 1.2 in - 4.45 in

The Rotary Systems' 90° swivel is made for the application of car washing as it utilizes a shaft that is ground and hardened; the impregnated seals and bronze bearings are also optimized. The swivel has an extensive air ...

Pressure: 1 bar - 12 bar
Nominal size: 0.25, 0.5 in

... of air, pressurised oil and cooling oil into rotating shafts are standard products and are not only for use in conjunction with clutches. In addition to this Ortlinghaus also develops and manufacturers rotary ...

UNION 3P COUPLING - BUTT WELD END / FEMALE BSP - STAINLESS STEEL 316L

Pressure: 50, 40, 8, 7 bar
Rotational speed: 3,500, 3,000, 2,500, 750 rpm
Nominal size: 0.25 in - 2 in

Pressure: 10 bar - 50 bar
Rotational speed: 1,500 rpm - 3,000 rpm
Nominal size: 9 mm - 150 mm

... Type R Rotary Joints are manufactured with damage-resistant materials. The materials used by the type R rotary joints are brass and stainless steel. These joints are ...

MCPI's multiple way rotary union is a unit component that enables to feed various mediums like water, cooling fluids, vacuum and compressed air, from a stationary line into a rotating ...

Rotary Unions are self-contained and self-supporting rotary seals used to transfer different media such as steam, water, air or oil from a stationary source to and from ...

Pressure: 180 bar - 350 bar

Pressure: 10 bar
Rotational speed: 55,000 rpm

Universal rotary joint for water and thermal oil with balanced mechanical seal and ball bearings. Various seal combinations can be selected, depending on the application. Meets the special ...

Pressure: 12, 70 bar
Nominal size: 0.3 in - 2.5 in

... filtered air and water) or silicon carbide (for oil and water) seals. Available in one or two way versions and sizes ranging from 1/4” to 2” 1/2, with fixed or rotating siphon. Graphite ...

Rotational speed: 770 rpm - 2,500 rpm
Nominal size: 0.25 in - 2.5 in

The NB series is supported by two carbon-graphite bearings, suitable for use with steam, water and diathermic oils at temperatures of up to 316°C. The treated carbon-graphite is suitable for spherical sealings; the seal ...

Pressure: 0 bar - 10 bar
Nominal size: 38 mm - 82 mm

Compact media transfer system This D1 media exchanger makes cable breaks and undefined interference contours through the power supply line a thing of the past Flat design This structure reduces the moment load for your robot to a ...

Pressure: max 500.0 bar

CONSTRUCTION ¼” NPS (M) x ¼” NPS (F) Five, high-precision metallic parts, made out of 303 Stainless Steel One friction washer, made out of PTFE One spring seal, made out of ultra-high molecular weight polyethylene Only 51 grams HIGHLIGHTS Rated ...

Pressure: 10 bar
Rotational speed: 0 rpm - 100 rpm

... transmitting. CENO air rotary union can pass compress air,nitrogen and so on.Liquid swivel is widely used for transmit water,oil and some chemical liquid media and ...

Pressure: 1 bar
Rotational speed: 0 rpm - 250 rpm
Nominal size: 10 mm

QCN0102-06P1-02EM is an integrated rotary union slip ring, which is designed by CENO for lithium battery equipment to pass air and power. This rotary union has one air ...

Pressure: 1 bar
Rotational speed: 250 rpm

CENO air rotary union can pass compress air,nitrogen and so on.Liquid swivel is widely used for transmit water,oil and some chemical liquid media and etc..Both air and ...