- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Liquid nozzle
Liquid nozzles
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
- Model DL8025SS FloodStream Liquid Nozzle For spraying processes where space is at a premium, EXAIR now offers the new 1/8 NPT FloodStream Liquid Atomizing Spray Nozzle. ...
EXAIR
Orifice diameter: 0.25 in
Flow: 1.8 us gal/h - 6.9 us gal/h
Pressure: 0.4 bar - 4.8 bar
EXAIR's 1/4 FNPT No Drip internal mix deflected flat fan pattern nozzles conserve expensive liquids and protect product finishes from drips by shutting off the liquid flow when no air ...
EXAIR
Orifice diameter: 0.25 in
Flow: 6.9 us gal/min
Pressure: 0.7, 0.8, 0.4, 0.6 bar
... flat fan pattern nozzles are designed for use where space is at a premium. The flat fan pattern sprays at a right angle to the nozzle’s orientation, allowing spray to be placed precisely where it’s needed ...
EXAIR
Orifice diameter: 20 µm - 60 µm
... directed. The liquid stream is entrained by high velocity compressed air to create a range of micron-level spray droplets, resulting in greater surface coverage than conventional nozzles. With this more ...
ITW Air Management
Orifice diameter: 20 µm - 200 µm
... directed. The liquid stream is entrained by high velocity compressed air to create a range of micron-level spray droplets, resulting in greater surface coverage than conventional nozzles. With this more ...
ITW Air Management
Orifice diameter: 60 µm - 200 µm
... directed. The liquid stream is entrained by high velocity compressed air to create a range of micron-level spray droplets, resulting in greater surface coverage than conventional nozzles. With this more ...
ITW Air Management
Orifice diameter: 0.7 mm - 3.42 mm
Flow: 1.52 l/min - 191 l/min
Pressure: 20 bar - 200 bar
F FLAT FAN NOZZLE – HIGH PRESSURE WASHING F flat fan nozzle is designed for high-pressure washing applications. Their specially designed inner profile allows for even jet distribution, which results ...
PNR Italia
Orifice diameter: 2 mm - 10 mm
Flow: 0.3 l/min - 222.7 l/min
Pressure: 0.5 bar - 10 bar
GA FLAT FAN NOZZLE – SHORT BODY The special short body design of the GA flat fan nozzle makes it possible to use nozzle spray pipes in such machines or systems where the available ...
PNR Italia
Orifice diameter: 0.4 mm - 6 mm
Flow: 0.9 l/min - 155 l/min
Pressure: 3 bar - 20 bar
GE FLAT FAN NOZZLE – DISC NOZZLE In GE flat fan nozzle (thickness 1.2 mm), the spray jet is close to the turbulence structure and this special design makes them very easy to clean. ...
PNR Italia
Orifice diameter: 0.25, 0.34, 0.13, 0.19 in
Pressure: 0 psi - 200 psi
Media temperature: 0 °C - 371 °C
... with most normal fuels, Spin Jets produce a 70° cone angle spray with differential pressure in the 50-200 psi range. With liquids having a surface tension in the 0.002-0.005lb/ft. range, the droplet size is typically ...
Orifice diameter: 0.07 mm
Pressure: 10 psi - 200 psi
Media temperature: 200 °F
Dispensing nozzles are designed for low volume dispensing, ranging from nanoliter droplets to precise dosing of milliliters at a time. These dispensing nozzles are available with orifice sizes as small ...
... connect nozzles. Special tipped nozzles such as ruby and cermet are also available. NOZZLE SPRAY OPTIONS Flat fan spray Solid jet stream Hollow cone Full cone
Orifice diameter: 0.006 in - 0.023 in
... sprayed. Due to the small dimension of the carbide insert, this component can be integrated in many different kinds of nozzle/tip bodies. Designed for applications on rotating surfaces, e.g. can coating, drum covers, ...
Orifice diameter: 49 mm
Flow: 60.8 l/min
Pressure: 500 bar
... of the flat jet. Applications with hot water up to 100°C can be carried out at any time. Orbimaster nozzles can be connected to the standard 9/16" nozzle pipe of the WOMA guns without adapter. rotor ...
WOMA GmbH
Orifice diameter: 40 mm
Flow: 42.9 l/min
Pressure: 800 bar
... of the flat jet. Applications with hot water up to 100°C can be carried out at any time. Orbimaster nozzles can be connected to the standard 9/16" nozzle pipe of the WOMA guns without adapter. Weight ...
WOMA GmbH
Orifice diameter: 40 mm
Flow: 180 l/min
Pressure: 1,500 bar
... of the flat jet. Applications with hot water up to 100°C can be carried out at any time. Orbimaster nozzles can be connected to the standard 9/16" nozzle pipe of the WOMA guns without adapter. Weight ...
WOMA GmbH
Pressure: 3 bar - 8 bar
Media temperature: -25 °C - 80 °C
... for use in even the tightest spaces. How it works: The fluid hose is either laid into a pressure-free tank or connected. The atomizer should always be fixed a little above the maximum fluid level ...
Sommer-Technik
Pressure: 2 bar - 8 bar
Media temperature: -25 °C - 80 °C
... Measuring example for fluid volume, 1 min. at 20 °C: ISOVG150: 24 ml at 6 bar; 18 ml at 3 bar Water: 370 ml at 6 bar; 250 ml at 3 bar Matching accessories (please order separately): Pneumatic hose: S-PU4 Fluid ...
Sommer-Technik
Pressure: 5 bar - 8 bar
Media temperature: -25 °C - 80 °C
... oil is applied simultaneously. The minimal-atomizer ZMIN has a built-in fluid shut-off valve. It only switches to flow when compressed air is actually available and blocks the fluid infeed immediately ...
Sommer-Technik
Orifice diameter: 19 mm
Flow: 45 l/min
Pressure: 5 bar
AdBlue/DEF nozzles with stainless steel and thermoplastic versions available. Depending on the model they can be manual or automatic, with spike or thread connection.
... kHz, the liquid is sprayed when coming into contact with a vibrating surface. • Within the frequency range above 100 kHz, an ultrasonic emitter is placed on the bottom of a volume of liquid. The sound ...
We have shown rapid growth in the market and we provide our customers premium quality of Brass Component. We make the components with accuracy of as low as 10 microns. High Quality Customized Turned Parts with great precision & Accuracy ...
Orifice diameter: 1 in
Flow: 19 l/min - 250 l/min
Pressure: 6 bar
... pattern called RYLSTATIC®. RYLSTATIC® is a system that gives you a uniform water fog with smaller water droplets and less friction loss than other traditional systems. VIPER ATTACK nozzles ...
Tipsa
Orifice diameter: 0.5 in
Flow: 25 l/min - 950 l/min
Pressure: 6 bar
... - lled RYLSTATIC®. RYLSTATIC® is a system that gives you a uniform water fog with smaller water droplets and less friction loss than other traditional systems. VIPER BLUE DEVIL nozzles ...
Tipsa
Orifice diameter: 1 in
Flow: 19 l/min - 230 l/min
Pressure: 6 bar
... for a quality fog pattern. Foam: The VIPER® SG nozzle can be used as an aspirating foam nozzle with the addition of inline eductors and foam tubes. Inlet Options: The VIPER® SG selectable flow nozzles ...
Tipsa
Orifice diameter: 0.2 mm - 1.6 mm
Low Flow Rate Fine Fog Nozzles/ Flat Spray BIMV series Features • Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less (*3). • Features large turn-down ...
Ikeuchi Europe
Lance Nozzle, good for complete evaporation in cooling tower, large volume is also effective for dust suppression. Features • Pneumatic spray nozzle producing fine atomization with a mean droplet ...
Ikeuchi Europe
Orifice diameter: 0.2 mm - 5.8 mm
Standard Flat Spray Nozzles - One-piece Structure with Ceramic Tip Even Spray Distribution Features • Flat spray pattern with uniform distribution throughout pattern area. • Even spray impact across ...
Ikeuchi Europe
... manufactured by ACF®, is a blast nozzle that functions as a normal and dust free blasting that is adapted in all of the different types of blasters that is equipped with a nozzle holder. In addition, ...
Flow: 70, 110, 190 l/min
Pressure: 2, 3, 1 bar
Media temperature: 0 °C - 50 °C
Rotary Nozzle with AC Static Eliminator for Dust Removal and Ionisation • Wide area covarage by rotating the nozzle with high speed • Tungsten pins for extreme high lifetime • Cleaning areas by using ...
FÖGE Elektronik GmbH
Flow: 100 l/min - 110 l/min
Pressure: 4 bar
Media temperature: 0 °C - 50 °C
Rotary Nozzle with AC Static Eliminator for Dust Removal and Ionisation • Wide area covarage by rotating the nozzle with high speed • Tungsten pins for extreme high lifetime • Cleaning areas by using ...
FÖGE Elektronik GmbH
Flow: 215, 290, 375 l/min
Pressure: 4, 6, 8 bar
Media temperature: 0 °C - 50 °C
Rotary Nozzle with AC Static Eliminator for Dust Removal and Ionisation • Wide area covarage by rotating the nozzle with high speed • Tungsten pins for extreme high lifetime • Cleaning areas by using ...
FÖGE Elektronik GmbH
Orifice diameter: 0.5 mm - 3.5 mm
Flow: 50 l/min - 5,000 l/min
Pressure: 40 bar - 350 bar
... loss through the nozzle. - Smaller and lighter compact design which is more durable, easy to clean and can be rapidly stripped down and reassembled. - No wrenches or tools are required to install the nozzle. - ...
DELAVAN France
SPRAY CHARACTERISTICS Fine atomisation of many liquids that cannot be atomised by hydraulic pressure alone. Uniform solid cone. Spray angle varies with air pressure and flow. Separate metering device, such ...
DELAVAN France
... pressure-fed external mix flat fan spray nozzle The external mix feature allows control of the atomization without changing liquid flow. The lighter the air pressure, the higher the atomization for a ...
DELAVAN France
... Dispensing Tips Micron-S Precision Dispensing Tips are designed for high accuracy micro-dot dispensing. Micron-S tips have a Luer lock thread and can be used with any dispensing syringe, ...
Flow: 0.7 us gal/h - 61 us gal/h
Pressure: 3 psi - 40 psi
... Pressure-Fed Pneumatic Spray Nozzles External mix: allows spraying of viscous materials Able to spray high viscosity (100+ cP) fluids which require a round spray pattern Liquid flow rate is controlled ...
BETE
... a material's height are detected and the nozzle automatically makes the required height adjustments, maintaining the necessary nozzle standoff to avoid collision with warped surfaces and protecting the ...
OMAX
*Suitable for processing almost all standard thermoplastics *Large selection of nozzles designs for a wide array of applications
Otto Männer GmbH
Flow: 1.6 l/h - 3.4 l/h
Pressure: 3 bar - 14 bar
Media temperature: 5 °C - 10 °C
This plastic misting nozzle is equipped with a non blocking filter inside that makes the nozzle a longer life, and it is anti-drop designed so that the nozzle will not drip when the pressure ...
DaYu Water-saving Group Co.,Ltd.
Flow: 0.19 l/min - 32,530 l/min
Pressure: 25 bar
FullJet nozzles are ideal for spraying fluids containing particulates. Our experts can help you tailor any FullJet nozzle for your needs. *Full cone spray pattern creates a round impact area. ...
Spraying Systems Co.
Due to the slide sealing it is possible to have both large spaces between nozzles and short nozzle lengths. The slide seal hot runner nozzle is installed in the nozzle ...
Meusburger Georg GmbH & Co KG
... • Heater and Thermocouple, Nozzle body and Nozzle Tip can easily be replaced • Multi-purpose applications, suitable for small cavity centre distances • Twist prevention at the ...
... SideGate Inline option. It is perfect for part spacing as low as 18 mm, and it is available with individual tip temperature control (up to four tip nozzles) for industry-leading balanced ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining