PNR brass nozzles
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Cercoflam nozzle specially made for sanitary burner Réf. 4656.
Orifice diameter: 0.25 in
Flow: 32 ft³/min
Model HP1002 High Power Air Nozzle EXAIR's High Power Safety Air Nozzle provides strong blowing force for applications requiring high thrust and velocity. It uses more compressed air than other air nozzles ...
Orifice diameter: 0.13 in
Pressure: 5.5 bar
Media temperature: 204 °C
... level requirements Meets OSHA pressure requirements. Improved production High Velocity Air Jet Materials Brass - general purpose applications. Maximum temperature 400°F (204°C). Type 303 Stainless ...
Orifice diameter: 2 mm - 10 mm
Flow: 0.3 l/min - 222.7 l/min
Pressure: 0.5 bar - 10 bar
GA FLAT FAN NOZZLE – SHORT BODY The special short body design of the GA flat fan nozzle makes it possible to use nozzle spray pipes in such machines or systems where the available ...
PNR Italia
Orifice diameter: 0.28 mm - 12.5 mm
Flow: 0.32 l/min - 223 l/min
Pressure: 0.5 bar - 10 bar
GX FLAT FAN NOZZLE – LOW CAPACITY GX flat fan nozzle tips are usually mounted onto a pipe by means of a welded nipple or a clamp, and secured in place with a retaining nut. They can ...
PNR Italia
Orifice diameter: 0.38 in - 0.75 in
Flow: 0.78 l/min - 223 l/min
Pressure: 0.5 bar - 10 bar
... flat fan nozzle tips are usually mounted onto a pipe by means of a welding nipple and secured in place with a retaining nut. Therefore, they can be easily replaced and their dovetail connection assures ...
PNR Italia
Orifice diameter: 66, 40 mm
Flow: 0.83, 30 l/min
Pressure: 0.2, 1 bar
... / U060 Aerator Nozzles particularly suitable for retrofitting. U025 Aerator Nozzles are used with fine powdery materials, such as cement, lime and similar powders, at an operating pressure of 0.2 bar ...
Orifice diameter: 60 µm - 200 µm
Vortec Spray Nozzles provide ultra-fine droplet-sized sprays for evaporative cooling, atomization, humidification and wetting. Superior to conventional hydraulic and piezoelectric nozzles, spray nozzles ...
Pressure: 2 bar - 8 bar
Media temperature: -25 °C - 80 °C
... uncomplicated, functional atomizer. We can deliver it on trial. Technical data: Material: Anodized aluminum; nickel-plated brass Viscosity range: 1 - 300 mm2/sec. at 20 °C Spray angle: 30° Max. air cons. at 6 ...
Sommer-Technik
Pressure: 5 bar - 8 bar
Media temperature: -25 °C - 80 °C
- With or without metal hose - For thing liquids - Minimal lubrication/fine atomizing The compact, economical atomizer, or "The micro-fine oil film“" This atomizer has a simple construction for dependable function. With its ...
Sommer-Technik
Pressure: 3 bar - 8 bar
Media temperature: -25 °C - 80 °C
Small like a flea... is our mini atomizer. Recently our developer Bernd Heise lost track of the newly developed prototype and had to search for days on end. Fortunately the atomizer turned up again so you can install it in the smallest ...
Sommer-Technik
Orifice diameter: 0.25 in
... full cone spray nozzles. • Ceramic orifice and closer provide excellent wear-resistance. Applications • Spraying: Oils, lubricants, glues, etchants • Cleaning: Galvanizing, gas • Cooling: Machinery, gas Industries in ...
... . • Three-piece structure prevents the whirler from dropping off. Applications • Cooling: billet Industries in which this nozzle is used • Steelmaking
... is of full cone spray type. The precision made nozzle ensures maximum possible atomization by using compressed air or other gas/steam as medium. The nozzle is of siphon type. In this type, a negative ...
DELAVAN France
... - O-Ring with Brass nozzle, or PTFE preformed seal with Stainless Steel nozzle 30609 nozzles are produced in Brass with Stainless Steel metering ...
DELAVAN France
... with a 1 1/2" BSPT Female threaded body - fitted with 15 removable solid cone spray nozzles. Made in Stainless Steel, Gunmetal/Brass as standard. Other nozzles can be fitted to ...
DELAVAN France
Orifice diameter: 0.2 mm - 2 mm
Nozzle for Zero Cavity Nozzle made of stainless steel Nozzle body made of brass and coated
Orifice diameter: 0.2 mm - 1.5 mm
Brass nozzles 7 air orifices right twisting Non Wide
Media temperature: 450, 350, 320 °C
Heating nozzles for injection machines and molds, hot melt application, similar spray gun, especially in cases where they are available for mounting in limited areas DESCRIPTION: • Power dissipation: up to 5.5 W / ...
Media temperature: 350, 450 °C
Electrical resistance brass injection nozzle, injection nozzles. Nozzle band heater brass tube Diameter = 30mm Height = 22mm, 25mm, 30mm, 35mm, 40mm, ...
Orifice diameter: 0.75, 1, 1.25 in
Flow: 80 l/min
Pressure: 4 bar
Nozzle made of nickel-plated brass, PTFE seals, rotatable hose connection For filling and transferring neutral and aggressive media and liquids, also in the field of pharmaceutical and the food industry. ...
Orifice diameter: 1 mm - 8 mm
Standard flat spray nozzles SC Standard flat spray nozzle in cap system MULTIJET. Advantages Color coding in accordance with ISO Standard 10625 Inexpensive flat spray nozzle Nozzle ...
Lechler
Orifice diameter: 40 mm - 80 mm
Off center nozzle with wide throw width characteristic. Advantages Laterally offset orifice Asymmetrical flat spray nozzle Spraying range 6 – 8 m
Lechler
Orifice diameter: 0.8 mm - 2.6 mm
Flat fan nozzles tips with dove-tail (small), series 660 Alignment with dove-tail Mounting with 3/8" lock nut Spray angle: 20°, 30°, 45°, 60°, 90°, 120° Volume rate at 2 bar: 1.00 l/min to 16.00 l/min ...
Lechler
Orifice diameter: 0.38 in - 1 in
Piton fixed irrigation suitable for irrigation and direct stream cleanups
Orifice diameter: 0.38 in - 1 in
Lanza adjustable suitable for irrigation and watering with deferentesd angulosde jet cleaning.
... Washing and cooling of air and gas Dust control Surface treatments Humidifications Chemical processes Materials: Brass Stainless steel Others materials on demand
EUSPRAY BY EUROSPRAY SPRAY AND FILTER TECHNOLOGY
B3 NORMAL SQUARE FULL CONE Characteristics: Types B one piece made Large capacity types F-B3 (1) S.S. AISI 316 made Applications: Washing Cooling Foam dispersion Fire protection Air and gas washing Chemical processes Other ...
EUSPRAY BY EUROSPRAY SPRAY AND FILTER TECHNOLOGY
BB3 NORMAL SQUARE FULL CONE Characteristics Types BB have removable caps Applications: Washing Cooling Foam dispersion Fire protection Air and gas washing Chemical processes Other materials on demand
EUSPRAY BY EUROSPRAY SPRAY AND FILTER TECHNOLOGY
Flow: 1.5 us gal/h - 7.4 us gal/h
Pressure: 40, 10, 30, 20, 60 psi
... Pneumatic Spray Nozzles DESIGN FEATURES Deflected flat fan spray pattern HOW SPRAY PATTERN IS ACHIEVED In a pressure-fed system, the liquid is supplied under pressure to either internal or external mix BETE ...
BETE
Flow: 0.74 l/min - 32 l/min
Pressure: 150, 60, 125 psi
... -turn tip installation drastically reduces maintenance time, allowing workers to change spray tips without tools. *Many options are available, including a variety of spray tips and ...
Spraying Systems Co.
Orifice diameter: 0.22 mm - 0.55 mm
For precise, intermittent dot and bead applications brass nozzle with pressed in stainless steel core Uniform application from the first to the last shot Exact application and high repeat accuracy ...
UES AG
- The swepro flat fan nozzle, made from brass, is suitable for continuous use in all industry sectors. Applications for the flat fan nozzle are cleaning, cooling, coating and wetting ...
... Air Mag™ series. The Air Mag™ series of nozzles utilize some patented features to create the highest force/CFM of any air nozzle we know of. All Nex Flow Air Nozzles meet OSHA standard ...
Nex Flow Air Products Corp.
... wide variety of styles and materials Brass insert inside the nozzle maintains inner diameter Brass insert prevents the nozzle from rocking High-temperature resistant ...
... manufacturer and supplier of Brass Agriculture Parts. Types of Brass Agricultural Parts •Brass Agriculture Fitting Spare Parts •Brass Spray Nozzles •Brass ...
Orifice diameter: 0.5 mm - 2.8 mm
... Simple installation/de-installation for cleaning or servicing by hand Material: stainless steel 1.4305 (AISI 316L) or brass (others on request) Material with surface quality of Ra < 0.8
High-grade atomizer for professional use in all maintenance and service areas, containers made of HDPE Newly developed, high quality nickel-plated double pump mechanism with angled, rotating swivel Atomizing thin oils, petroleum and ...
Spiral nozzle inject water into a spiral extrude orifice. Different from ordinary nozzle, spray pattern of spiral nozzle is not a complete cone, it's a uneven spray pattern instead. This ...
... spray angle is constant at pressures between 20 and 80 p.s.i. The CCS nozzles are machined from bar, and includes a one piece body along with a non-removable insert. It is made up of brass and is used ...
BEX
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining