Low-load start-up control valves supply the boiler with the required quantity of feedwater during start-up (30–50% of the water required for full-load operation), regulated by volume, at higher pressure ...
Level control valve Tasks One of the functions of condensate (level) control valves is to control the level of accumulated condensate and discharge it to the main or auxiliary condenser. Different types ...
... consisting of the minimum flow unit including the minimum flow valve, the required pump protection is ensured. The minimum flow valve thus acts as a pump safety valve. Versions Forged ...
DN: 0.5 in - 4 in
Pressure: 10 bar
Temperature: 50 °C
Industrial float valve with die casted body in brass or bronze. Guided shutter with rubber seal (elastomeric type). Progressive closure. Suitable for water tank level control and other liquids. Level ...
Metalurgica Zaes S.L.
DN: 0.5 in - 2 in
Pressure: 10 bar
Temperature: 50 °C
ndustrial float valve with die casted body in brass or bronze. Guided sutter with rubber seal (elastomeric type). Full port pass and progressive closure. Suitable for water tank level control and other ...
Metalurgica Zaes S.L.
DN: 0.5 in - 2 in
Pressure: 10 bar
Temperature: 50 °C - 120 °C
Industrial float valve with die casted body in Stainless Steel AISI316. Swing clapper shutter with rubber seal (elastomeric type). Full port pass and progressive closure. Suitable for water tank level ...
Metalurgica Zaes S.L.
DN: 10 mm - 100 mm
Pressure: 16 bar - 25 bar
Temperature: -32 °C - 106 °C
GESTRA cooling-water control valves GESTRAMAT No outside energy or maintenance required These proportional controllers regulate the cooling water flowrate to consumers that need cooling, ...
GESTRA AG
DN: 50 mm - 600 mm
Pressure: 10, 4, 6, 5 bar
The AKO type B knife gate valve is a bi-directional wafer valve for media of high consistency. It is predominantly used in the paper and pulp and chemical industries, in water ...
DN: 40 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -20 °C - 110 °C
... extension 75 mm length ( option ) • - Square lever 30x30 mm for spécial key ( option ) USE : • - Fluids : Cold and hot water. dnnkable water • - Not advisable : Hydrocarbon, steam. gas. acids, oil. ...
SFERACO
DN: 100 mm - 2,000 mm
Pressure: 10 bar - 40 bar
Temperature: 80 °C
Body material Ductile iron Disc material Ductile iron PN (End) PN40 End Flanged Contact sealing EPDM Operating system Manual gear box
TECOFI
Pressure: 5 bar
... Rotary Tube Selector Valve diverts pneumatically conveyed powders and granules from one line up to any of sixteen lines. Flow can also be converged from multiple lines into one line. Valve is often used ...
Pressure: 500,000 Pa - 700,000 Pa
... Selector Valves are flow diversion valves that employ an axially mounted plate to control the flow of pneumatically transported materials. Flow may be diverted to one of two tubes, which intersect at ...
Temperature: 454, 565 °C
... High turndown ratio for both steam and water Noise attenuating trim options Single stage hush Multi-stage hush RAVEN ‘Quick-Change’ trim design no special tools The DSCV-SA (Direct Steam Converting Valve ...
DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316
SOCLA
DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M
SOCLA
DN: 8 mm - 100 mm
Pressure: 63, 40, 25 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar
SOCLA
DN: 6 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C
Sealing form 1 - 3 Shape A Connection 1 - 3 BSP cylindrical internal threads Bore L shaped Contact travel 0°; 90° Surface nickel plated Material Brass housing Aluminium handle Brass ball, ...
DN: 5 mm - 32 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C
Connection 1 + 2 metric cylindrical outer thread Sealing form 1 + 2 24° inner cone Material Brass
DN: 0.5 in - 3 in
... size and is ideal in hot/chilled water units such as, fan coil units, water source heat pumps, reheat coils, panel coils, small branch lines, unit heaters, unit ventilators, finned radiation, small domestic ...
Watts Water Technologies
DN: 15 mm - 50 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
The pinch valves from Ross has a compact and economical design that is utilized for a broad range of applications in the industrial automation industries. It is ideally used for compressed air and other media. It is a ...
ROSS EUROPA
DN: 50 mm - 80 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
MAIN VALVE Housing (01): Aluminum alloy. Threaded cap (03): POM (polyoxymethylene). O-Ring (06): NBR (nitrile rubber). Screw (07): galvanized steel. Sleeve (08): see material selection. Port: Female threads, DIN ...
ROSS EUROPA
DN: 40, 32 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
MAIN VALVE Housing (01), Flange (04): POM(polyoxymethylene). Screw (07): galvanized steel. Sleeve (08): see material selection. Port: Flange, (DIN PN 10/16). Ambient temperature: -20° to +50°C. Media temperature: ...
ROSS EUROPA
DN: 15 mm - 50 mm
Pressure: 0 bar - 132 bar
Temperature: -46 °C - 400 °C
3 piece metal seated ball valve, for high temperature and clean services, in stainless stell or carbon stell, with lever or actuator, SW, BW, NPT, class 800Lbs
Penta Srl
DN: 0.5 in - 2 in
Pressure: 138 bar
Temperature: -46 °C - 400 °C
The AP20P valve belongs to the AP series. It is equipped with metallic seats that permit that engineering of metal seated ball valves. It features ease of maintenance without requiring extra lapping of ...
Penta Srl
DN: 0.5 in - 6 in
Pressure: 16 bar
Temperature: -46 °C - 400 °C
... series is a line of ball valves manufactured by Penta. It offers an efficient solution for high-temperature fluid handling with reliability and capability. The ball valves are also produced with quality, ...
Penta Srl
DN: 25 mm
Valve 25 of sphere with demultiplier. Thread of 1 “female-female, male-TC female or male-female.
Nuevas líneas de extincion
DN: 25 mm
25 sphere valve. Made of chromed brass. Thread of 1 “female-female or male-female.
Nuevas líneas de extincion
DN: 25 mm
25 ball valve made of chromed brass. Opening by butterfly. Thread of 1 “female-female or male-female.
Nuevas líneas de extincion
... ratio for both steam and water Noise attenuating trim options Single stage hush Multi-stage hush RAVEN ‘Quick-Change’ trim design no special tools The DSCV-SA (Direct Steam Converting ...
Pressure: 2,500 psi
... Copes-Vulcan Model F100-40 Sampling Valve was developed to provide positive shutoff and reliable operation for both sampling and containment isolation applications in nuclear power plants. Such high-pressure water, ...
DN: 10 mm
Pressure: 10 bar
Temperature: 65 °C
Front control valve, inlet and outlet copper tube 10x1mm, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: ...
Pressure: 4 bar
Front control valve in stainless steel, inlet and outlet G1/4" female, for special waters Plastic headwork TECHNICAL FEATURES Media: Special Waters Maximum pressure: 4 bar Maximum ...
Pressure: 4 bar
Temperature: 48 °C
Front control valve in polypropylene, inlet and outlet G1/4" female, for special waters Plastic headwork TECHNICAL FEATURES Media: Special Waters Maximum pressure: 4 bar Maximum ...
DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... resistant against aggressive water 10 year warranty maintenance-free shaft sealing with self-lubricating EPDM lip gasket, replaceable under pressure up to DN 80 EPDM-seat gasket cone rotatable, protected ...
DN: 8, 10 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C
... triangular key against unauthorised removal of water valve body and sampling pipe can be rotated 360° PTFE seat gasket can be attached to all Kemper valves with test/drain-port ...
DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
... directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded acc. to DIN-259.
ABV
DN: 0.25 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
... directly actuarors Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static system. Specifications •Tank bottom flange in AISI-316L.
ABV
DN: 0.375 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
... actuators Characteristics • General industry application, •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static system. Specifications Length: DIN 3202 m3. Ends: ...
ABV
DN: 40 mm - 1,200 mm
Pressure: 40, 10, 16, 25 bar
STANDARDS OF MANUFACTURE Metal seat gate valves EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 558 (ISO 5752) FACE TO FACE EN 1092-2 (ISO 7005-2) DRILLING ...
ACMO S.p.A.
DN: 2 in - 12 in
Pressure: 150 psi
... SIZE: 2＂～12＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC pneumatic butterfly valve
Xiamen Keheng Plastic Co., Ltd.
DN: 2.5 in - 12 in
Pressure: 150 psi
... SIZE: 2-1/2＂～12＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC electric butterfly valve
Xiamen Keheng Plastic Co., Ltd.
DN: 2.5 in - 8 in
Pressure: 150 psi
... 2-1/2＂～8＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC handle type butterfly valve
Xiamen Keheng Plastic Co., Ltd.
... technological process allow these valves to be used for the most demanding conditions in power engineering, petrochemical, heating, chemical industry, metallurgy etc. In Europe they are known as BR12A. We can adjust ...
DN: 40 mm - 700 mm
Pressure: 4 bar - 16 bar
Temperature: -10 °C - 120 °C
... DN150 PN10 These valves are made of A-class quality and very suitable and applicable for: Bilge / ballast systems, loading systems, salt / fresh water, lubricating oil, fuel oil, gas oil etc ... outboard ...
MerxTrade BV
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 120 °C
Gate valve Nodulair cast iron Body GGG50, stem stainlesssteel, seat brass Flanged RF PN16 - DIN 3202 F4 - Rising stem Non rising handwheel Max. pressure: 16 bar Temperature range: -10°C/+120°C Applications: Hot ...
MerxTrade BV
DN: 32 mm - 300 mm
Pressure: 10 bar - 16 bar
Temperature: -10 °C - 110 °C
97/23/EC directive N° 0035 - Risk category I-III / Module H GG25 body - Epoxy coated - ISO pad Max. pressure:16 bar up to DN300, 10 bar above Temperature range with EPDM seat: -10°C/+110°C (temporarely +130°C) Gearbox recommended above DN200
MerxTrade BV
DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C
304 SS Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical / pharmaceutical ...
pneumaticairactuator.com
DN: 25 mm - 300 mm
Pressure: 2 bar - 8 bar
Temperature: -50 °C - 120 °C
... Butterfly Valve Air Operated For Marine Industry Structure - rack and pinion rotary actuator Surface Treatment - hard anodizing Low Temperature: -40ºC(-104°F) ~ 80ºC (+176°F). Connection - NAMUR, ISO5211, and ...
pneumaticairactuator.com
... pressure, the ceramic valve shows its excellent performance. Ceramic valves can meet the high wear and strong corrosion environment, especially the outstanding feature is the long service life, the performance-price ...
pneumaticairactuator.com
DN: 40 mm - 300 mm
Pressure: 1.5 bar - 12 bar
Temperature: 40 °C
The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any foreign energy. Application ...
Hawido AG
DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: 40 °C
The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any foreign energy. Application ...
Hawido AG
DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: 40 °C
The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any foreign energy. Application ...
Hawido AG
... rating 4500#: Choke valves. Pressure reducing and overflow control stations. Upstream/downstream constant pressure keeping. Leak-off control valves for minimum flow on boiler feedwater pumps. Cooling ...
Pressure: 400 bar
Choke valve is a kind of control valves, mostly used in oil and gas production wells to control the flow of well fluids being produced. Choke valves allow fluid flow through a very ...
Please specify:
Help us improve:
remaining