Diameter: 20 mm - 100 mm
Operating pressure: 16 bar
Structure: • stator (outer part) and rotor (inner part) joined by a single-row ball bearing • for-life lubrication provided in the factory • welded connection parts: welding ends, pipe bends or flanges Materials: • basic unit: ...
STENFLEX Rudolf Stender GmbH
Diameter: 125 mm - 700 mm
Operating pressure: 10, 16 bar
Structure: • stator (outer part) and rotor (inner part) joined by a two-row ball bearing • for-life lubrication provided in the factory • welded connection parts: welding ends, pipe bends or flanges Materials: • basic unit: 1.7225 ...
STENFLEX Rudolf Stender GmbH
Diameter: 20 mm - 150 mm
Operating pressure: 16, 40 bar
Structure • stator (outer part) and rotor (innerpart) joined by a two-row ball bearing • for-life lubrication provided in the factory • welded connection parts: welding ends, pipe bends or flanges Materials: • basic unit: 1.7225 ...
STENFLEX Rudolf Stender GmbH
Diameter: 8, 10, 4, 12, 6 mm
Operating pressure: -0.99 bar - 20 bar
ORIENTING TEE MALE ADAPTOR (TAPER)-CENTRE LEG The 60.000 serie is fully made of stainless steel AISI 316L. It has been developed to drive corrosive fluids or to be used in aggressive environments. ...
AIGNEP
Diameter: 8, 6, 12, 10 mm
Operating pressure: -0.99 bar - 20 bar
MALE ADAPTOR PARALLEL The 60.000 serie is fully made of stainless steel AISI 316L. It has been developed to drive corrosive fluids or to be used in aggressive environments. It is ideal for direct ...
AIGNEP
Diameter: 6, 4, 8, 10 mm
Operating pressure: -0.99 bar - 15 bar
... bar (1.5 Mpa) Fluidi Compatibili Compressed air - Vacuum - Water. Fluid for food and chemical industries compatible with fitting components. Meausure Tube: da 6/4 a 10/8; Threads: da 1/8 a 3/8.
AIGNEP
Diameter: 32 mm - 150 mm
... - Property 4862, cast on, made of metal Material of the nozzle - Stainless steel 1.4310 Design of the sealing ring - made of rubber Material of the sealing ring - NBR Properties Chemical ...
Diameter: 32 mm - 150 mm
... nozzle - cast on, made of metal Properties Chemical Properties - stainless, odourless and tasteless, good resistance to chemicals Other - Dissipation of electrostatic charge by grounding connection ...
Diameter: 27 mm
Terminal plug stainless steel design with male thread for coupling sockets nominal size 2,7 Type: 60 Material: Stainless steel 1.4305 Price information: Due to ...
Diameter: 13.25, 16.75 mm
Operating pressure: 250, 400 bar
... Screw-in fitting Construction type French series Note Hinweise zur Montage, Einbau, Druckbelastung und zulässige Betriebstemperaturen entnehmen Sie bitte den technischen Informationen für Rohrverschraubungen. ...
Diameter: 13.25, 16.75, 21.25 mm
Operating pressure: 400, 250 bar
... Design Fitting Construction type French series Note Hinweise zur Montage, Einbau, Druckbelastung und zulässige Betriebstemperaturen entnehmen Sie bitte den technischen Informationen für Rohrverschraubungen. ...
Diameter: 13 mm - 76 mm
Operating pressure: 4.9 bar - 16.1 bar
... Reinforcement AC: Copper wire spiral to improve static electricity discharge. Plastic wire (Vena Sil 650V Plastic). Traceability Silicone label QR Marking Special marking Assemblies 316L ...
Diameter: 0.75 in - 1.5 in
Operating pressure: max 4.14 bar
If you are looking for the right answer to questions and problems such as finding the right way to integrate existing stainless processing equipment with single-use components, this product is what you are looking for. ...
Diameter: 4, 6, 8 mm
... successfully and the new SERTO Flow Series 51 coupling is now available. The new coupling is manufactured from 1.4571 stainless steel and equipped with FDA-compliant FKM seals. The elegant, ergonomic ...
SERTO
Diameter: 1.6 mm - 28 mm
Operating pressure: 250 bar
... fast to install • resistant to corrosion • compact size • extensive range • many combination possibilities Material Stainless steel 1.4571 (≈ 316 Ti), alloy X6CrNiMoTi17-12-2, DIN EN 10088-3 Leak rate ...
SERTO
Operating pressure: 40 bar - 250 bar
... to meet the highest requirements for tightness and cleanliness in stainless steel connecting components. SERTO Selection stands for ultrasonically cleaned, lubricant-free stainless steel ...
SERTO
Diameter: 5.5, 5.3, 7.5 mm
Operating pressure: 16, 12 bar
The high flow enhances your tool performance for increased productivity. The secret behind this innovative and patented safety coupling is the highest flow on the market combined with a low pressure drop. During disconnection eSafe ...
CEJN
Diameter: 4 mm - 38 mm
Operating pressure: 100 bar - 400 bar
Schwer Fittings
Diameter: 6 mm - 16 mm
Operating pressure: 315 bar - 630 bar
PN 630 only for tapered tapped holes, otherwise PN 400, Operational safety on male stud connection is 2.5 times the stated pressure. Operational safety on the pipe connection is 4 times the stated pressure
Schwer Fittings
Diameter: 4 mm - 12 mm
Operating pressure: 15 bar
Please note the permissible working pressure of the hose used . For Compatible hoses see chapter : Hose - HOS . Other O-Ring materials upon request : B = NBR , FDA - Compliant ; E = EPDM , FDA - Compliant ; Z = FFKM ( Kalrez )
Schwer Fittings
Diameter: 6.3 mm - 50 mm
Operating pressure: 9,000,000 Pa - 35,000,000 Pa
Connection by pulling back the sleeve Disconnection by pulling back the female sleeve Shut off by poppet valve Connection under pressure not allowed Disconnection under pressure not allowed Interchangeability according to ISO 7241-1 Part B
FASTER S.p.A.
Diameter: 0.5 in
Operating pressure: 16 bar
... DATA Material Body and thrust ring: nickel plated brass Thread Metric, taper and parallel Seal NBR rubber Clamp Stainless steel AISI 316 Size M5 ÷ G 1/2 Fluid Air, water, oil, steam Working ...
Operating pressure: 16 bar
... alternatively with crimped ferrules. Stainless steel hose tails with new shape for improved tightening, especially for hoses with thermoplastic lining. • Dust plug AVB / dust cap AMB All dimensions ...
Elaflex Hiby GmbH & Co. KG
... , loading arms, manifolds and IBC containers. Mann Tek brand (a subsidiary of ELAFLEX). Materials: Brass, aluminium, stainless steel. Special materials on request. All DDC are also available with NPT ...
Elaflex Hiby GmbH & Co. KG
... couplings with TW couplers or TW with Storz fire brigade coupling acc. to DIN 28 450. Type VB 80 ADR SS + VB 100 ADR Al TW dust plug, stainless steel, with integrated pressure relief ...
Elaflex Hiby GmbH & Co. KG
Diameter: 12.7 mm
Material: SS-316 Body Diameter: 3/8” OD For crimping or brazing to probe NON-Threaded TRANSITION 1) ATLG125SS * - 3/8″ OD X 1/8″ 2) ATLG1250SS * - 3/8″ OD X 1/4″ 3) ATLG188SS * - 3/8″ OD X 3/16″ 4) ATLG375SS * - 3/8″ ...
PUSHNA INTERNATIONAL
... also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding an RTD or thermocouple at the same time. Whether you are welding ...
PUSHNA INTERNATIONAL
... also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding an RTD or thermocouple at the same time. Whether you are welding ...
PUSHNA INTERNATIONAL
Operating pressure: 25, 80, 200, 250, 390 bar
... are available in 1/2”, 3/4” and 1” and many thread types, so they can connect any combination of threads and pipes . The fittings are suitable for low and high pressure work. Compatible with plastic garden connector.
NITO Fitting - NITO stainless steel fluid quick couplings are suitable for food contact and are used in the pharmaceutical, food, cosmetic and chemical industries. Stainless ...
Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa
... . Various sizes of unequal union type makes it possible to handle with just one fitting, although two or more fittings are used before. It reduces the amount of fitting used and enables ...
NIHON PISCO CO., Ltd.
Diameter: 3, 10, 2, 1.8, 6 mm
Operating pressure: -0.1 MPa - 1 MPa
Mini-type fitting is 40% smaller than the standard type fitting. Even the ultra-small size, tube can be easily connected or disconnected. The elliptical, ultra-small release ring is employed. Easy ...
NIHON PISCO CO., Ltd.
Diameter: 3 mm - 6 mm
Operating pressure: -0.1 MPa - 0.5 MPa
Barb joint best suitable for space-saving piping. They are optimal for piping vacuum equipment. (Use with vacuum tube.) As for compression type, tube can be tightening by hands. Clean-room Package, best suitable for compact piping ...
NIHON PISCO CO., Ltd.
Diameter: 2, 2.5, 3, 4 in
Operating pressure: 40 bar
Swivel joint – direct-flangeswivel Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball ...
HAAG + ZEISSLER Maschinenelemente GmbH
Diameter: 2 in - 32 in
Operating pressure: 40 bar
Swivel joint – direct-flangeswivel, Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ...
HAAG + ZEISSLER Maschinenelemente GmbH
Diameter: 0.25 in - 2 in
Operating pressure: 350, 100 psi
... joint – heavy version with thread connections, nominal diameters G1/4″ – G2″ Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal ...
HAAG + ZEISSLER Maschinenelemente GmbH
Operating pressure: 0 bar - 8 bar
It’s a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry Break coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in different fields of application ...
Diameter: 2, 3 in
Operating pressure: 0 bar - 8 bar
It's a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in différent fields of application ...
Diameter: 3, 2 in
Operating pressure: 0 bar - 8 bar
It's a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in différent fields of application ...
Diameter: 3 mm
Temperature Technology Ltd
Diameter: 1 mm - 8 mm
Temperature Technology Ltd
Diameter: 1.5 mm - 8 mm
Temperature Technology Ltd
Diameter: 3 mm - 14 mm
Operating pressure: 16 bar
– Push-in system with stainless steel elastic clamp – Tube assembly with one movement – For tubes in various materials (PU, PA) – Small-scale and low weight – O-ring in sealing channel — for rough ...
ITV
Diameter: 4 mm - 14 mm
Operating pressure: 16 bar
– Push-in system with stainless steel elastic clamp – Tube assembly with one movement – For tubes in various materials (PU, PA) – Small-scale and low weight – O-ring in sealing channel — for rough ...
ITV
Diameter: 4 mm - 14 mm
Operating pressure: 16 bar
– Push-in system with stainless steel elastic clamp – Tube assembly with one movement – For tubes in various materials (PU, PA) – Small-scale and low weight – O-ring in sealing channel — for rough ...
ITV
Diameter: 15 mm
Fitting for water connection with female thread (F) 15x1/2 EF Fitting Stahlmann ensures leak-free installation of Stahlmann corrugated stainless steel tube solutions. The ...
Diameter: 1.6 mm - 11.5 mm
Operating pressure: 0 bar - 7,000 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Diameter: 3.2 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Diameter: 3 mm - 20 mm
Operating pressure: 1,050 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Diameter: 15 mm - 108 mm
Operating pressure: 16 bar
Description NiroSan SF Tee, female ends 19130 - NiroSan SF Tee
SANHA GmbH & Co. KG
Diameter: 15 mm - 54 mm
Description NiroSan Bend 90°, male plain ends 9003
SANHA GmbH & Co. KG
Diameter: 15 mm - 54 mm
Description NiroSan Bend 90°, female end and male thread
SANHA GmbH & Co. KG
Ideal for pressure gauges with outlet on the back This horizontal output is very useful for connecting pressure gauges with an output on the back.
... disassemblable - Pressurized and depressurized connectable - Suitable for fluids and gases - Functional parts - high strength stainless steel - Mounting into individual contour - Flow optimized (real ...
... media. - Pressurized and depressurized connectable - Suitable for fluids and gases - Functional parts: high strength stainless steel - Mounting into individual contour - Flow optimized (real diameter) - ...
Please specify:
Help us improve:
remaining