DN: 2.5 in - 8 in
Pressure: 150 psi
... 2-1/2＂～8＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC handle type butterfly valve
Xiamen Keheng Plastic Co., Ltd.
DN: 2 in - 12 in
Pressure: 150 psi
JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC turbine butterfly valve
Xiamen Keheng Plastic Co., Ltd.
DN: 0.5 in - 4 in
Pressure: 150 psi
... : 1/2＂～4＂ JOINT END TYPE: FLANGE(ANSI 、 DIN 、 JIS) WORKING PRESSURE: 150PSI Key words: PPH flange type double ball valve
Xiamen Keheng Plastic Co., Ltd.
... making the primary seal on the precision formed tapered seat. For replacement Viton® O-ring Kit, see R110112.0-12mm high vacuum valve(T-Type) Accessories: S540012 0-12mm high vacuum plug and control knob Viton® O-ring at tip 42.05
Synthware glass
DN: 9 mm
VALVE, HIGH VACUUM, PTFE, O-RING, THREE-WAY With two 9mm O.D. sidearms sealed to the barrel at a 90® angle to one another. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primary seal on the ...
Synthware glass
DN: 9 mm
... primaryseal on the precision formed tapered seat . For replacement Viton® O-ring Kit, see R7010,or R108110.0-8mm high vacuum valve ,180° Accessories: S540004 0-4mm high vacuum plug and control knob Viton® O-ring at ...
Synthware glass
DN: 1 in
Male-female straight ball valve complete with soft-seal fitting, butterfly operation (red)
Unidelta S.p.A.
DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C
Type: Angle seat valves Functioning: 2/2 way pneumatically operated, Normally closed Body material: Stainless Steel AISI 316 series Port connection: G 1/2, G 3/4, G 1, G 1 1/2, 1 1/4, 1 1/2, 2 Flow Kv (l/min): 80, ...
DN: 0.5, 0.125, 0.25, 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 70 °C
Series of slide valves manually operated. In line mounting they work to close the supply and at the same time exhaust the downstream circuit air.
DN: 10, 5.5 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of miniature ball valves with cast body, manually operated and with reduced dimensions. In line mounting they work to close or open the flow in both directions.
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.
Pressure: 250 bar
CAV-250 Stand-alone high pressure valves for all type of paint types. CVM-250 is a colour valve module to be used for external paint or material supply to an applicator of any type. Can be built in ...
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...
Di Nicola Infinam Srl
DN: 3.96 in
Temperature: 35, 40 °F
... locomotive freeze protection valve in the world. This self-operating valve is designed to monitor the water temperature of the engine’s water-cooling system and automatically snap open to drain it if ...
DN: 3.88 in
... standard GURU® Plug. This thermostatic drain valve responds to the engine coolant temperature and will pop open to rapidly drain the system before freeze damage can occur when the coolant reaches the valve’s ...
Temperature: 35, 40 °F
The GURU® Valve DL2.1 CH and CHS Plugs are self-operating drain valves that are easily retrofitted into water-cooled air compressor heads to protect the compressors from freeze damage when a locomotive ...
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
- Manually operated 2-way ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material ...
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... adjustment M&C RV 11-… needle valves, this is possible in a reliable and exact manner thanks to the optimum design of the valve control system. The use of corrosion-resistant materials also ensures analytical ...
DN: 10 mm - 50 mm
Pressure: 63 psi
Temperature: -328 °F - 392 °F
... to-196°C. The shut-off valves are approved according to DIN EN 1626. The series is available in the nominal widths DN10 - DN50 and can be designed with connection options for welding ends and welding sockets. The manual ...
Goetze KG Armaturen
DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C
Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...
THROTTLE VALVE WITH FREE FLOW IN ONE DIRECTION DESCRIPTION The QTM7 valve is a one-way flow control valve with built-in non-return valve for reverse free flow, in ...
DN: 10 mm - 50 mm
Pressure: 16 bar
Armaturen Arndt
DN: 0.25 in - 0.5 in
Pressure: 6, 16 bar
manometer gauge cock, light design, female thread x female thread, material: brass
Armaturen Arndt
DN: 0.5 in
Pressure: 250, 400 bar
Temperature: 120, 200 °C
manometer gauge valve, DIN 16271, male thread x sleeve x test connector M20 x 1,5
Armaturen Arndt
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
ECONEX Manual Reset Shut-Off valves Normally Closed of the series MRVA are equipped with a new-concept powerful solenoid capable of functioning at high operating pressures and flow capacities than most ...
ECONEX S.R.L.
Pressure: 12 bar - 50 bar
Temperature: 0 °C - 80 °C
This metering valve is developed by I.L.C. srl. It is being offered with manual, pneumatic as well as electrical actuations. In addition, the metering valve is meters out the lubricant ...
The NV62L Block & Bleed Valve is most commonly used in combination with a declutchable gear override. This Namur accessory mounts in-line with other components such as a Namur solenoid valve, directly ...
DN: 0.25, 0.125, 0.43, 0.56 in
Pressure: 10,000, 6,000 psi
Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability Hard seat valves ...
NOSHOK
Pressure: 29.4, 31.6, 35.7, 42.2, 49.6 bar
Temperature: 38, 100, 200, 300, 400 °C
... all stop valves and with test and drainage function. The TrapStation TS 36 encompasses the universal connector, two stop valves - which are accessibly positioned and clearly colour-coded to ensure easy ...
GESTRA AG
DN: 0.125, 0.5, 0.25 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 60 °C
Axial slider valves allow to stop air flow inside a pneumatic system, simply by sliding the lever along the axis. Axial slider valves have zinc plated brass body while the slider is made of anodized ...
Pressure: 0 psi - 5,500 psi
The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen Service Valve ...
Generant
DN: 10 mm - 600 mm
... CERAMIC INDUSTRY, as a shut-off valve for solids, sludge, etc. ENVIRONMENTAL TECHNOLOGY, for sealing waste water, dust, sludge, etc. WATER TREATMENT/SEWAGE TREATMENT PLANTS, as a shut-off valve ...
AKO ARMATUREN
DN: 15 mm - 1,200 mm
Pressure: 3 bar - 40 bar
... closing process causes any incrustations inside the sleeve to break away. This means that the manual and control Pinch Valve is a practically blockage-free valve solution. Furthermore, ...
AKO ARMATUREN
DN: 15 mm - 250 mm
Pressure: 5, 3, 4, 2 bar
... of manual and conrol Pinch Valves OV series A selection of different elastomer grades for the sleeve (e.g. rubber, neoprene, nitrile and EPDM) ensures that the valves have a very wide ...
AKO ARMATUREN
DN: 16, 12, 10 mm
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 80 °C
New valve series, with priority flow on demand and pressure compensator with static or dynamic load sense. These valves can be used to supply steering control units and have the required flow for additional ...
VPG BUTTERFLY VALVE This valve is designed for the HVAC market and offers the best value for money! Excellent sealing: shaft protected by a sheath, IP67 manual gearbox. Complies ...
TECOFI
DN: 0.25 in - 2 in
Pressure: 140, 100 bar
Temperature: -20 °C - 220 °C
... class of 600lbs. It is specialized with a locking device, hand wheel, stem extension and an ISO 5211 mounting pad. For high temperature, PEEK seat is on request. 3 pièces carbon Steel bail valve fully ...
SFERACO
Please specify:
Help us improve:
remaining