Richter manual valves

Temperature: -30 °C - 80 °C
Flow rate: 8,200 l/min

3-way, manually operated, full flow lockout valves can be locked in the closed position with a padlock Helps you comply to OSHA regulations, as they relate to OSHA regulation 29 CFR Part 1910, standard for lockout/tagout ...

DN: 0.125 in - 1 in
Pressure: 0 bar - 15 bar
Temperature: -10 °C - 50 °C

... outside the electro-pneumatic valve operating range, so for particularly low or high pressures. The version with manual control can be locked and you can enter up to two padlocks on size 1 and up to ...

DN: 0.25 in - 2 in
Pressure: 0 bar - 15 bar
Temperature: -10 °C - 50 °C

The job of this valve is to make the circuit independent from the air supply. It is basically a three-way valve. In the closed position, it cuts off the air supply and discharges the downstream circuit ...

DN: 6, 8 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 60 °C

... a two-way unidirectional valve, while V3V is a three-way valve with free discharge in the area around the control knob. The locked version is probably the smallest available on the market. A lock is provided ...

DN: 0.25 in - 4 in
Pressure: 7, 10 bar
Temperature: -17 °C - 175 °C

Valves / Ball Valves Ball valves offer great economy and durability for a wide range of applications that do not require clean-in-place (CIP) service. They are easy to install and ...

DN: 12 mm - 152 mm
Pressure: 0 bar - 10 bar
Temperature: 93 °C

Valves / Butterfly Valves Butterfly Valves offer great durability and ease of use for a wide range of services. Features Easy to install and maintain, butterfly valves ...

DN: 38 mm - 102 mm
Pressure: 6.9 bar
Temperature: 80 °C

Valves / Relief Valves For installation on pump suction lines, the 40CF-AR Air Vent Valve is designed to operate as a CIP return air relief, and operates against either vacuum or positive ...

DN: 1, 0.75, 0.5 in
Pressure: 350 bar
Flow rate: 180, 120, 80 l/min

Circuit selector valve, manual operation maximum pressure

DN: 1, 0.75, 0.5 in
Pressure: 400, 350, 500 bar
Temperature: -20 °C - 125 °C

Pilling-Up directional control valve single or double acting. From 1 to 7 sections, with relief valve and multiple configuration options.

DN: 0.75, 0.5, 1 in
Pressure: 500 bar
Flow rate: 100, 80, 180 l/min

Constant openning valve, 3 way, made in steel for working with high pressure.

Pressure: 10 bar - 500 bar

max. operating pressure 500 bar, min. operating pressure 10 bar. Type of actuation: manual Application: For single acting cylinders. CETOP 3 adaptation.

DN: 6 mm

The hand valve provides bubble tight shut-off time after use. The valve is directly attached into the plate with O-ring seal.

DN: 50.8, 76.2, 127, 38.1 mm

HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...

3-Way and 6-Way Ball Valves Like HILCO Transfer Valves, HILCO Ball valves provide uninterrupted flow during transfer of fluid. Unlike Transfer Valves, which are limited ...

DN: 1.5 in - 8 in
Pressure: 0 psi - 5 psi
Flow rate: 0 us gal/min - 2,000 us gal/min

HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...

DN: 0 mm - 1.5 mm
Pressure: 0 bar - 34.7 bar

The needle valve is an adjustable orifice, which can be used to control flow rates, mini-cylinders, nozzles, timing circuits, filling heads, bleed vents, and in many other applications. The adjusted flow remains stable ...

DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar

The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve ...

DN: 0 mm - 0.81 mm
Pressure: 135 psi
Flow rate: 0 ft³/h - 20 ft³/h

The PCFCD-1N1 is designed to maintain a constant flow rate, which the customer can adjust, regardless of upstream or downstream pressure variations. It works with both liquids (incompressible fluids) and gases (compressible fluids) but ...

DN: 0.25 in - 2 in
Pressure: 1,200 psi
Temperature: -60 °F - 450 °F

Part Material Body - CF8M or SUS316 Body Cap - CF8M or SUS316 Bail - CF8M or SUS316 Retainer - CF8M or SUS316 Stem - SUS316 Seat - PTFE+15% GF Seal - PTFE Thrust - PTFE Stem Packing - PTFE Stem Gland - SUS304 Stem Nut - SUS304 Handle ...

DN: 0.25 in - 2 in
Pressure: 2,000 psi

Handle Gland - Vinyl Plastic - Handle - SUS304 - C.S. Plated Stem - SUS316 - C.S. Plated Handle - SUS304 - Gland - SUS316 - C.S. Plated Packing - Glass Filled PTFE - Thrust Washer - Glass Filled PTFE - Seat - Carbon Fibre Keinf ...

DN: 0.5 in - 3 in
Pressure: 600 psi

Investment casting, ASTM-A351, CF8M, Class 600, inside screw and screwed bonnet wedge dise. Intégral seat, Nonrising stem, and Handwheel. Body - CF8M Bonnet - CF8M Disc - CF8M Stem - SUS316 Gasket - Teflon Snap Ring - SUS316 Washer ...

DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

Globe valve - 507 The GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting ...

DN: 4 mm - 25 mm
Pressure: 0 bar - 8 bar
Temperature: -10 °C - 100 °C

Diaphragm valve - 650TL Diaphragm valve GEMÜ 650TL is a manual tapping valve with automatic closing function which is pneumatically operated. The "keep-closed" override ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C

The GEMÜ R677 2/2-way diaphragm valve has a low maintenance plastic bonnet and is manually operated. An integral optical position indicator is standard. The High-Flow valve body provides compact dimensions ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

DIALOCK® diaphragm valve with stroke limiter and male ends for solvent welding, metric series. The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty ...

DN: 15 mm
Pressure: 6 bar
Temperature: -20 °C - 140 °C

Compact diaphragm valve with male ends for solvent welding, metric series. The CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal ...

DN: 15 mm
Pressure: 6 bar

Compact diaphragm valve with male ends for socket welding, metric series. The CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal ...

DN: 20, 25, 15 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C

2 way MM BRASS Sintesi ball valve 2-way MM BRASS with caps and tangs

DN: 25, 20, 15 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C

2 way MF BRASS Sintesi ball valve 2-way MF BRASS with cap and tang

DN: 15, 25, 20 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C

3 way MMM BRASS Sintesi ball valve 3-way MMM BRASS with caps and tangs

DN: 6, 8, 4 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 80 °C

... CONTROL VALVES - WITH SWIVEL JOINT ► Configurable flow control valves for regulating the exhaust air ► Optimal for regulating the speeds during piston movements ► Angled version FLOW CONTROL VALVES ...

DN: 6, 4, 8 mm
Pressure: 10, 6 bar
Temperature: -5 °C - 50 °C

QUICK EXHAUST VALVE ► For higher piston speeds for cylinders ► To bring about quick-action ventilation, the valve must be installed as close to the cylinder's air connection as possible

Pressure: 4,200 bar

Manual valves for manual blocking of fluids. Available as straight or angled design.

DN: 12, 6 mm
Pressure: 0 bar - 500 bar
Temperature: -20 °C - 60 °C

C2.940 High-pressure shut-off valves C2.940 High-pressure shut-off valves max. operating pressure 500 bar nominal diameter: ND 6 and 12 temperature range: 40º ... + 100ºC ports: G1/4 or G1/2

Pressure: 350 bar

C2.940 Flow control valve with locking screw C2.940 Flow control valve with locking screw max. operating pressure 350 bar nominal diameter: ND 4 .. 12 ports: G1/8 .. G1/2