- Power Transmission - Mechanical components >
- Bearing and Linear Guide >
- Low-speed one-way clutch >
- RINGSPANN
RINGSPANN low-speed one-way clutches
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Torque: 70 Nm - 2,300 Nm
Diameter: 25 mm - 110 mm
Rotational speed: 160 rpm - 600 rpm
... design. The ML Series has a cam and roller structure, and various transmission parts can be easily mounted. Suitable for low to mid-speed and middle load applications. Features ・Uses a cam and roller ...
Tsubakimoto Chain
Torque: 294 Nm - 686,000 Nm
Diameter: 20 mm - 450 mm
Rotational speed: 50 rpm - 350 rpm
Exclusively used in backstop applications for conveyors. (low speed ) For low-speed overrunning applications. Low-speed overrunning type to be mounted ...
Tsubakimoto Chain
Torque: 216 Nm - 4,700 Nm
Diameter: 20 mm - 95 mm
Rotational speed: 250 rpm - 500 rpm
Cam Clutch was developed as a user-friendly backstopping Cam Clutch. It has cam and roller construction which is the same as the smaller size BS Series Cam Clutch. The outer race has ...
Tsubakimoto Chain
Torque: 314 Nm - 3,140 Nm
Diameter: 12.7 mm - 160 mm
Rotational speed: 700 rpm - 2,800 rpm
Cam Clutch products are designed to satisfy inner or outer race overrunning/general application requirements. Depending on application requirements, the MGUS Series can be used in overrunning, indexing, or backstopping ...
Tsubakimoto Chain
Torque: 314 Nm - 176,000 Nm
Diameter: 19 mm - 250 mm
Rotational speed: 250 rpm - 2,800 rpm
... Excellent wear resistance during overrunning. Coupling type (MG-C) is also available. Features ・Suitable for medium- and low-speed overrunning with the compact design and high torque capacity. ・Excellent ...
Tsubakimoto Chain
Torque: 54 Nm - 1,230 Nm
Diameter: 16.51 mm - 79.36 mm
Rotational speed: 180 rpm - 2,400 rpm
Cam Clutch is a general purpose Cam Clutch used in backstop, overrunning, and indexing applications. Generally the customer supplies the inner race as a component of his machinery but if desired, Tsubaki ...
Tsubakimoto Chain
Torque: 39.2 Nm - 1,400 Nm
Diameter: 18.8 mm - 79.36 mm
Rotational speed: 180 rpm - 2,400 rpm
... is designed to be mounted directly to the shaft. ・Can be compactly embedded in sprockets and gears. ・Suitable for low to medium speed applications. ・Dedicated inner races are made to order.
Tsubakimoto Chain
Torque: 2,500, 230, 1,600, 630 Nm
Diameter: 20 mm - 85 mm
Rotational speed: 260, 500, 180, 340 rad.min-1
... lubrication Application as Backstop Indexing Freewheel For application as backstop in installations with low speeds in freewheeling operation. ...
RINGSPANN
Torque: 220 Nm - 2,500 Nm
Diameter: 20 mm - 80 mm
Rotational speed: 220 rad.min-1 - 500 rad.min-1
... grease lubrication Application as Backstop Indexing Freewheel For application as backstop in installations with low speeds in freewheeling operation. For ...
RINGSPANN
Torque: 3,750 ft.lb - 900,000 ft.lb
Diameter: 3.44 in - 21 in
Rotational speed: 100 rad.min-1 - 620 rad.min-1
... Application as Backstop for installations with low speeds. The freewheels are designed for the use in inclined conveyor-belts, elevators or pumps. Taconite seals ...
RINGSPANN
Torque: 6,900 Nm - 503,550 Nm
Diameter: 80 mm - 320 mm
Rotational speed: 110 rad.min-1 - 620 rad.min-1
... as Backstop for installations with low speeds. The freewheels are designed for the use in inclined conveyorbelts, elevators or pumps. Taconite seals protect the freewheels ...
RINGSPANN
Torque: 62 Nm - 578,000 Nm
Rotational speed: 95 rpm - 7,000 rpm
High speed and low speed backstop with sprag lift off and roller ramps design. Available either with or without radial support bearings and a reaction torque arm. (Area ...
Torque: 110 Nm - 1,230,000 Nm
Diameter: 20 mm - 560 mm
Rotational speed: 240 rpm - 5,000 rpm
... - Overunning Clutches for applications with high speed freewheeling operation and when used as an overrunning clutch with low speed driving operation. ...
Torque: 420 Nm - 42,500 Nm
Diameter: 15 mm - 150 mm
Rotational speed: 84 rpm - 1,700 rpm
... of standardized bore diameters are available with short delivery times. Application as Backstop Overrunning Clutch Indexing Freewheel
Torque: 43.2 Nm - 835 Nm
Diameter: 16.51 mm - 56.09 mm
Rotational speed: 220 rpm - 2,650 rpm
Type CB-200 is a sprag type free wheel not self-centring. It is therefore necessary to place one or two bearings next to the free wheel so that the outer race can rotate centrally to the inner race. The bearings to ...
C.T.S.
Torque: 20 Nm - 44,400 Nm
Diameter: 8 mm - 150 mm
Rotational speed: 250 rpm - 5,000 rpm
The UF Series freewheels are not self- centering. It is therefore necessary to place one or two bearings next to the freewheel so that the outer race can rotate centrally to the inner ...
C.T.S.
Torque: 3.8 Nm - 513 Nm
Diameter: 8 mm - 60 mm
Rotational speed: 700 rpm - 6,000 rpm
The US Series freewheels are not self-centering. It is therefore required to place one or two bearings next to the freewheel so that the outer race can rotate centrally to the inner race. ...
C.T.S.
Torque: 12 Nm - 7,250 Nm
Diameter: 8 mm - 100 mm
Rotational speed: 450 rpm - 5,000 rpm
The USNU Series freewheels are not self-centering. It is therefore necessary to place one or two bearings next to the freewheel so that the outer race can rotate centrally to the inner ...
C.T.S.
Torque: 20 Nm - 35,000 Nm
Diameter: 8 mm - 130 mm
Rotational speed: 250 rpm - 3,600 rpm
The GF Series freewheels are self centering. From size 8 to size 20, centering is steel on steel, while from size 25 to 130, centering is ensured by 2 160.. series bearings. Torque forces are transmitted from the shaft ...
C.T.S.
Torque: 55 Nm - 70,000 Nm
Diameter: 12 mm - 150 mm
Rotational speed: 200 rpm - 5,600 rpm
... be applied to the freewheels before operation, following instructions given on page 12. Each freewheel is supplied with two paper gaskets that must be inserted between the outer race and the flanges. ...
C.T.S.
Torque: 125 Nm - 20,000 Nm
Diameter: 15 mm - 100 mm
Rotational speed: 350 rpm - 5,300 rpm
... be applied to the freewheels before operation, following instructions given on page 12. Each freewheel is supplied with two paper gaskets that must be inserted between the outer race and the flanges. ...
C.T.S.
Torque: 55 Nm - 70,000 Nm
Diameter: 12 mm - 150 mm
Rotational speed: 200 rpm - 5,600 rpm
... D2 or D3 cover flange. Normally the flanged freewheel is fitted by the customer in the required direction of rotation, using the paper gaskets and screws supplied (running without the gaskets, the freewheel ...
C.T.S.
Torque: 55 Nm - 70,000 Nm
Diameter: 12 mm - 150 mm
Rotational speed: 200 rpm - 5,600 rpm
... flange and the D2 cover flange. Normally the flanged freewheel is fitted by the customer in the required direction of rotation by using the paper gaskets and screws supplied (without the gaskets, the freewheel ...
C.T.S.
Torque: 55 Nm - 70,000 Nm
Diameter: 12 mm - 150 mm
Rotational speed: 200 rpm - 4,000 rpm
... the D2 or D3 cover flange. Normally the flanged freewheel is fitted by the customer in the required direction of rotation by using the paper gaskets and screws supplied (without the gaskets, the freewheel ...
C.T.S.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining