Sick technology switches
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Primary current: 1,500 mA
Voltage: 24 V
Operating temperature: -25 °C - 70 °C
... required to enable this fine positioning. Furthermore, the sensor box also integrates four shielded tracks in latching reed technology. As such, the sensor box can be installed with ease with just ...
SCHMERSAL
Primary current: 0 mA - 250 mA
Voltage: 0 V - 110 V
The Schmersal thermoplastic enclosure non-contact safety switch mounts easily with four screws. There is no protruding of the actuator which measures 119,5mm x 140mm x 43,3mm. The symmetrical design is suitable for ...
SCHMERSAL
Primary current: 0.6 A
Voltage: 32 V
• - Thermoplastic enclosure • - Electronic contact-free, coded system • - Misaligned actuation possible • - 27 mm x 108.2 mm x 35 mm • - High repeat accuracy of the switching points • - Max. length of the sensor chain 200 m • - ...
SCHMERSAL
S46 and S46T Microwave Switch Systems are designed to simplify the automated switching needed to test a wide range of RF and telecommunication products and devices. The S46 can control 32 relay contacts in a package as ...
Sensors as part of the safety equipment can be used to monitor safety doors as well as other detachable guards. These sensors are useful in making complementary NO/NC contact as well as equivalent and includes two as well as three N/O ...
SICK
Primary current: 15 A
Voltage: 120, 240, 480 V
The CLIPPARD ES-1 Series Switches are designed primarily to coincide with the MPA series actuators. Made from high-grade materials, it ensures serviceability and reliability in delivering optimum results. Its portability ...
Primary current: 3 A
Voltage: 30, 125, 250 V
Clippard MAS series switches (air to electric switches) use a standard miniature single pole double throw (SPDT) electrical switch which is UL, SEMKO, VDE and CSA certified. The range of switch ...
Primary current: 5, 3 A
Voltage: 125, 250, 30 V
... has sub-miniature air switches. These one of a kind switches use a standard sub-miniature single pole double throw electrical switch certified UL and CSA. These highly flexible and reliable switches ...
Honeywell's MICRO SWITCH CPS Series Cable-Pull Safety Switches provide a readily accessible emergency stop signal, a cost-effective means compared to using multiple emergency stop push-buttons. The CPS ...
Magnetic Safety Sensors BERNSTEIN offers the user coordinated coded magnetic switches and corresponding actuators. With suitable evaluation (e.g. BERNSTEIN MÜZ), the sensor fulfils the requirements of DIN EN 60947-5-3 ...
Coded magnetic switches are available in a variety of types. They offer amazing protection against tampering. Made of sturdy plastic, the switches are available with 9m, 6m and 3m cable or connector versions. ...
Interface RF Connectors with Switch, 3.9mm Height, DC to 6GHz Interface RF Connector with Switch, 3.9mm High, DC to 6GHz 1. Low insertion loss Typically, 0.08dB at 1GHz Typically, 0.1dB at 2GHz 2. ...
Voltage: 105 V - 130 V
OPTO-TOUCH Optical Touch Buttons are zero-force ergonomic replacements for mechanical push buttons. Momentary-action touch buttons with electromechanical relay or solid-state outputs.
Voltage: 12 V - 30 V
Replaces capacitive touch switches and mechanical push buttons Features illuminated base (to provide a bright, easy-to-see job light) solid, flashing or multiple color models available Offers choice of models ...
... Sealed components resist water, dirt and are more accommodating to misalignment than mechanical switches Compact size makes it possible to conceal the switch Three housing styles are available ...
... from head switch. Intended for heavy loaded industrial machines with fast rundown time. The device comes with the key operating switches such as XCSA, XCSB, XCSC with lesser speed rundown ...
Telemecanique Sensors
... Cable Pull Switches can be installed along or around awkward machinery such as conveyors and provide a constant emergency stop access. The system includes a rope status indicator and emergency stop button mounted on the ...
Allen-Bradley
Primary current: 25 mA
Voltage: 3.2 V - 5.5 V
Diameter / length: 6 mm
High performance, hall-sensed switch for various coding, with mechanical and electrical interfaces, up to 20 Ncm switching torque and optional push function Product Features Hall Sensed Switch ...
Primary current: 0.1, 0.2 A
Voltage: 28 V
Operating temperature: -45 °C - 85 °C
Highly robust Ø 1/2" selector with 22.5°, 30° or 36° indexing angle, up to 6 Ncm switching torque and operating temperature from -45 to 85° C Product Features 22.5°, 30° or 36° indexing angle Various options and customizations ...
Primary current: 6, 3 A
Voltage: 250, 230 V
Operating temperature: -20 °C - 90 °C
... self-extinguishing UL 94 V-0 Degree of protection - IP 65 to IEC/EN 60529 B10d (10 % load) - 200 000 TM - max. 20 years Switch insert - 1 x Ex 14 Contact material - silver Switching system - slow action, positive ...
steute Schaltgeräte
Voltage: 230 V
The mechanical safety switches PSENmech are suitable for safe monitoring of a movable guard. If guards are opened, the safety switches PSENmech are tripped. The hazardous machine movement is then brought ...
Primary current: 0.01 mA - 100 mA
Voltage: 0 V - 35 V
Diameter / length: 15 mm
The RF 15 gold tactile switches have a 15 x 15 mm edge length, reliable gold contacts and a noticeable click. They are used in flat data entry keyboards under overlays or under keycaps, such as RAFI RK 90 keycaps. Flat ...
RAFI GmbH & Co. KG
Primary current: 1 mA - 5,000 mA
Voltage: 12 V
Operating temperature: -40 °C - 120 °C
Johnson Electric’s automotive switch product line under the Saia-Burgess brand sets a new standard for high reliability in door locking systems. The technology leading line of L16 microswitches increases ...
Johnson Electric
Height: 4.3 mm
... Series SMD Tactile Switches are durable and high quality. Design in the NEW EVP-BT Series Tactile Switch when the device calls for a Switch with a short travel distance for extremely ...
The SFN series safety non-contact door switches utilize magnetic type detection to monitor opening and closing of doors. The dedicated controller allows multiple connection of up to 30 units. The switches ...
The MN series magnetic non-contact switches utilize magnetic type detection to monitor opening and closing of actuator doors. The switches can be installed vertically or horizontally, and can also be ...
Primary current: 1 mA - 50 mA
Voltage: 0 V - 30 V
Operating temperature: -20 °C - 55 °C
Safety switch with integrated mounting magnet for process protection (without guard locking monitoring) Integrated CES-AR electronics A special evaluation unit is not required Up to 20 AR devices can be connected in ...
EUCHNER GmbH + Co. KG
Primary current: 80 mA
Voltage: 24 V
Operating temperature: -20 °C - 55 °C
... Unicode Approach direction Can be adjusted in 90° steps Unicode evaluation Each actuator is highly coded (unicode). The switch detects only taught-in actuators. Additional actuators can be taught-in. Category ...
EUCHNER GmbH + Co. KG
Primary current: 0.25 A - 8 A
Voltage: 300 V
... monitoring The switch generates its own clock signal on the output lines OA/OB. Pay attention to this aspect when connecting to control systems and relays. Unicode evaluation Each actuator is highly coded (unicode). ...
EUCHNER GmbH + Co. KG
Primary current: 1 A - 10 A
Voltage: 250, 125, 50, 30 V
The DC contact block is used for signalling and annunciation applications. The snap-action mechanism prevents slow contact opening when the plunger is operated slowly. Quenching of the arc that occurs with DC is supported by two-capacity ...
Primary current: 1 A - 10 A
Voltage: 125, 250, 30, 50 V
The Cam Controller NU 1 is used as a signal and annunciation switch in HV systems. This rugged switching device has cam discs made of insulation material that can be set at 10° intervals. The DC contact blocks are designed ...
Primary current: 0 A - 0.5 A
Voltage: 0 V - 48 V
•High reliability and long service life thanks to contactless reed technology •Developed for harsh operating conditions, high protection class IP67 for electronics Robust and space-saving design •3 ...
ELOBAU
Primary current: 5 A
Voltage: 250 V
Mounting Mounting cut-out - Ø 22,3 mm Design - raised Front Front dimension - Ø 22 mm Other Attributes Weight - 0,080 kg Operating-/Indication part Lever colour - black Connection Method Terminal - Solder 2.8 x 0.5 ...
EAO France
Primary current: 1 A - 3 A
Voltage: 240, 230, 120, 110 V
S800 Series snap-action switches feature positive opening operation, which guarantees a reliable opening of NC contacts, even when welded due to a short-circuit or current overload. That is why S800 Series snap-action ...
Schaltbau GmbH
Primary current: 0.5 A - 5 A
Voltage: 60, 120, 230, 240 V
Unlike series S800 and S804, Schaltbau’s S814 Series snap-action switches do not possess positive opening operation. They normally come with silver-plated contacts, but are also available with gold contacts. Due to their ...
Schaltbau GmbH
Primary current: 1 A - 5 A
Voltage: 110, 120, 230, 240 V
S820 switches add to the well proven standard series of snap-action switches with positive opening operation as developed by Schaltbau with an even more ruggedized design, featuring a current-carrying ...
Schaltbau GmbH
The Safemaster STS engineered by Dold, is a safety interlock switch that features a complete safety concept. This device offers users a standard expandable system and is composed of a durable stainless steel construction. ...
Primary current: 5, 15 A
Voltage: 30, 125, 250 V
Operating temperature: -20 °C - 60 °C
SRT Conveyer Belt Misalignment Switch use various electromechanical and electronic technology to protect equipment and personnel. These safety devices include: – SRT belt misalignment switch ...
Primary current: 5, 15 A
Voltage: 250, 125, 30 V
... Pull Switch use various electromechanical and electronic technology to protect equipment and personnel. These safety devices include: – SRT belt misalignment switch – SRS safety stop ...
Primary current: 16 A
Voltage: 690 V
... e EN60069-2-27 Shocks resistance as EN600068-2-29 Connections: spring clamp contacts for push buttons, mushrooms, rotary switch screws terminals for cam-switches, buzzers and socket outlets Ambient temperature: operating ...
Giovenzana International B.V.
Primary current: 20 A
Voltage: 690 V
... 1NO Features Lift technology - Standards NOT Conformed EN81-20 & EN81-50 Lift technology - Placement Lift Lift technology - Types Pit bottom controls SeriesAlarm ...
Giovenzana International B.V.
Primary current: 20 A
Voltage: 690 V
... station 1 Cam Switch 1-0-2 + Black knob ø35 45° switching – spring reurn to the centre – 1NO+1NO Features Lift technology - Standards NOT Conformed EN81-20 & EN81-50 Lift technology ...
Giovenzana International B.V.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining