- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Positive displacement flow meter >
- SIKA
SIKA positive displacement flow meters
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Volumetric flow rate: 20 m³/h
Process pressure: 1,480 psi
Precision: 1 %
... facilitates a low installation cost or portability. The determination of water cut is supported by the optional attachment of a meter driven proportional sampler. Other attachments support electronic reporting to supervisory systems.
The micro-flow sensor can be used with needle metering valves to confirm that material is being dispensed. It is designed for the detection of very small quantities (0.005 - 3.00 ml). This device is meant purely for material ...
- Type of monitoring: Digital flow indicator with adjustable switching points - Number of switching points: max. 2 or corridor monitoring - Display range for KUZ-D/F/XH: 0.0 ... 7.0 l/min - Display ...
Process temperature: 400 °C
Process pressure: 0 psi - 1,500 psi
... Vortex multivariable meters employ three sensing elements in a single meter: a vortex shedding velocity sensor, an RTD temperature sensor, and a solid-state pressure transducer. Within this single instrument, ...
Volumetric flow rate: 800 l/h - 25,000 l/h
Process temperature: 0 °C - 200 °C
Precision: 0.5 %
New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve. Totalizer Counter: 6 digital Zero Reset Counter: 5 digital Signal Output ...
Process temperature: -40 °C - 120 °C
Process pressure: 160 bar
Precision: 2 %
INTEGRAL FLOW ORIFICE FOR LIQUID AND GAS FLOW MEASUREMENT An integral orifice flow meter is a device used for measuring the fluid flow rate. It measures ...
Volumetric flow rate: 5 l/min - 10 l/min
Process temperature: 0 °C - 60 °C
Process pressure: 6 bar - 20 bar
FLOW MASTER is a flow volumetric device which allows the constant monitoring of the lubrication delivering. As the measurements are volumetric, they don’t depend on temperature or viscosity but they ...
Process temperature: -20 °C - 40 °C
Process pressure: 10 bar - 400 bar
The Flow metering device is designed to volumetrically monitor small flow rates on low pressure lubrication systems. Its operation is based on the progressive system operating concept. The displacement ...
Process temperature: -10 °C - 70 °C
Process pressure: 20 bar - 300 bar
... pressure and small quantity of return flow is channeled via a bypass check valve arrangement therefore excluding the return flow from being counted or interfering with the SMP flow monitor. ...
Process temperature: 0 °C - 120 °C
Process pressure: 10 bar
... or ducts • No real upper limit of mass flow • Maximum pressure 10 bar • Dust tight • No flow restrictions to the process flow (wear resistant ceramic liner) • The mass flow ...
Volumetric flow rate: 6 l/h - 420 l/h
Process temperature: 0 °C - 80 °C
Process pressure: 40 bar
KOBOLD piston flow meters are direct volume counters, also called displacement counter (positive displacement meter). ...
Volumetric flow rate: 0.1 us gal/min - 1,100 us gal/min
Process temperature: 45 °F - 140 °F
Process pressure: 0 psi - 175 psi
... typical positive displacement meters. Advanced Metering Information. Provides information—such as rate of flow and reverse flow indication—and data ...
Badger Meter
Volumetric flow rate: 80 l/min - 1,200 l/min
Process temperature: -10 °C - 50 °C
... compact measurement systems rely on the legendary metrological characteristics of the oval wheel meter as a measuring element for the precise detection of volume flows. An innovative concept which combines ...
Volumetric flow rate: 0.2 l/min - 16 l/min
Process temperature: -10 °C - 80 °C
Process pressure: 0 bar - 160 bar
... interruption output signal: Pulse signal The SIKA gearwheel volume sensors are suitable for the detection of volumetric flows with high as well as varying viscosity in the following areas of application, among ...
SIKA
Volumetric flow rate: 0 l/min - 50 l/min
Mesa Lab 's newest standardized primary volume flow meter offers easy-to-use calibrations with unmatched flow ranges, accuracy and portability. The FlexCal offers you: USB connectivity Flow ...
CleanAir Europe
Volumetric flow rate: 0 l/min - 30 l/min
Precision: 1 %
... piston flowmeters with Bios DryCal® technology in the DC-Lite and DC-2 digital flowmeters. They allow calibration of air sampling pumps, rotometers or other flow instruments. Depending on the model, ...
CleanAir Europe
Volumetric flow rate: 0 l/min - 30 l/min
Precision: 1 %
... technology in the DC-Lite and DC-2 digital flow meters is available in the Defender 510The Defender 510, 520 and 530+ calibrators make it easier than ever to calibrate air sampling pumps, rotometers or ...
CleanAir Europe
Volumetric flow rate: 2 l/h - 100 l/h
Process temperature: 150 °C
Process pressure: 15 bar - 34 bar
-For very small flow rates. -Measurement according to the oval gear principle. -For thin-bodied up to viscous liquids. -Low friction resistance. -Very precise dosing possible. -High resistance. -Wide range of viscosities ...
ASIT ITALIA
Volumetric flow rate: 15 l/h - 550 l/h
Process temperature: 150 °C
Process pressure: 15 bar - 34 bar
-For very small flow rates. -Measurement according to the oval gear principle. -For thin-bodied up to viscous liquids. -Low friction resistance. -Very precise dosing possible. -High resistance. -Wide range of viscosities ...
ASIT ITALIA
Volumetric flow rate: 1 l/min - 40 l/min
Process temperature: 120 °C
Process pressure: 68 bar
-For very small flow rates. -Measurement according to the oval gear principle. -For thin-bodied up to viscous liquids. -Low friction resistance. -Very precise dosing possible. -High resistance. -Wide range of viscosities ...
ASIT ITALIA
Volumetric flow rate: 0.4 m³/h - 250 m³/h
Process pressure: 70 bar
Repeatibility: 0.2 %
... . While turbine flow meters are not suitable for use with high viscosity fluids, oval gear flow meters can be used easily in these areas. In oval gear flow ...
Volumetric flow rate: 23 l/min - 2,300 l/min
Process pressure: 0 bar - 10 bar
Repeatibility: 0.05 %
Volumetric flow meter uses a fixed small volume to repeatedly measure the volume of fluid passing through the flow meter. Therefore, there must be a space that constitutes ...
Volumetric flow rate: 0.6 m³/h - 200 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 16, 10, 6, 40, 25 bar
... gas flow meter is also called Roots flowmeter. It is mainly used for high-precision measuring instruments for continuous or intermittent measurement of gas or liquid flow ...
Volumetric flow rate: 5 m³/h - 340 m³/h
Process pressure: 63 bar
Precision: 0.5, 0.2 %
Double rotor flow meter is the latest generation of positive displacement flowmeters, also called UF-‖ flow meters or screw flowmeters. ...
Volumetric flow rate: 0 l/min - 525 l/min
Process temperature: -40 °C - 210 °C
Process pressure: max 450.0 bar
VSI+ flowmeters measure the volume flow of the medium according to the gearwheel principle. A gearwheel pair fitted very precisely in the housing forms the measuring unit. The rotation of the measuring ...
VSE Volumentechnik GmbH
Volumetric flow rate: 0 l/min - 525 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 450 bar
Our VS gear flow meters offer unbeatable performance, linearity and resolution for most accurate measurement of clear, viscous liquids according to the gearwheel principle. A gearwheel pair adapted ...
VSE Volumentechnik GmbH
Volumetric flow rate: 0 l/min - 3,000 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 450 bar
... viscosity oil or viscous resin - RS flow meters are the ideal solution for precise flow measurement. Thanks to various bearings, tolerances, materials, coatings, electronics and resolutions, ...
VSE Volumentechnik GmbH
Process temperature: 40 °C
Process pressure: 20 bar
Precision: 0.1 %
The Emi3 instantaneous flowmeter is the world reference equipment for the characterization of automotive injectors.The EMI3 is a device for measuring the volume injected. It also offers measurement of the opening and ...
Volumetric flow rate: 0.5 l/h - 550 l/h
Process temperature: -20 °C - 120 °C
Process pressure: 34, 15 bar
The Micropulse range of positive displacement flowmeters offer a high level of accuracy and repeatability. These precision meters can be used for flowrate measurement, ...
Filton Process Control Engineering
Volumetric flow rate: 1 l/h - 600 l/h
Process temperature: -20 °C - 60 °C
Process pressure: 2 bar - 25 bar
... with kinematics viscosity of 1.5 cSt to 6 cSt can be measured by DFM. DFM fuel flow meter is a tool for direct fuel consumption measurement, the data from the flow meter ...
Technoton
Volumetric flow rate: 1 l/h - 500 l/h
Process temperature: -40 °C - 85 °C
Process pressure: 2 bar - 25 bar
... with kinematics viscosity of 1.5 cSt to 6 sSt can be measured by DFM. DFM fuel flow meter is a tool for direct fuel consumption measurement, the data from the flow meter ...
Technoton
Volumetric flow rate: 1 l/h - 500 l/h
Process temperature: -20 °C - 60 °C
Process pressure: 2 bar - 25 bar
... cSt to 6 cSt can be measured by DFM. DFM fuel counter is an autonomous tool for direct fuel consumption measurement, which can be used without additional devices for data logging. The fuel counter ...
Technoton
Process temperature: -30 °C - 600 °C
Process pressure: 600 mbar - 1,100 mbar
... volume flow measurement is necessary in addition to the concentration measurement (e.g. % CO2/m3) to measure the exact volume of noxis gases. This is the volume flow measurement of air in the stack ...
Volumetric flow rate: 1.4 l/min - 2,500 l/min
Process temperature: 0 °C - 150 °C
Process pressure: 0 bar - 350 bar
... measurement possible with forwards and reverse flow ● For cost-sensitive applications ● Simple to use ● Cable outlet infinitely rotatable Characteristics The VHS flow transmitter measures the ...
Process pressure: 0 bar - 3.1 bar
RZ positive displacement flowmeter : The RZ positive displacement flowmeter is the solution to applications requiring precision ...
... service condition. Unlike most flow meters, including Coriolis and other Positive Displacement Flowmeters, VAF Instruments liquid Flowmeters have ...
Volumetric flow rate: 0 m³/h - 3,000,000 m³/h
Process temperature: -20 °C - 850 °C
For continuous volume flow measurement in dry gases. Reliable, even under extreme operating conditions. FEATURES Continuous measurement of velocity and volume flow Double-sided ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining