SUCO clutches

Torque: 1.3 Nm - 1,850 Nm

Torque: 4 Nm - 1,850 Nm

... centrifugal force acting on the flyweights overcomes the spring force. When the speed is high enough, the linings contact the clutch drum, and friction between the linings and the drum allows torque to be transmitted between the two.

Torque: 854 Nm - 1,250,000 Nm
Rotational speed: 380 rpm - 3,600 rpm

... space-saving footprints, minimal maintenance requirements and are available in sizes ranging from 8” to 60”. Power Grip Clutch Features Extended hub teeth for serviceability Wave Springs as standard release ...

... flexible coupling or via a 'BD' series clutch. Type BD clutches have been designed to mount onto any engine with flywheel and bellhousing conforming to SAE dimensions. These clutches consist of an overcentre clutch ...

Torque: 150 Nm - 1,600,000 Nm

... distances between axles possible, and in this way offers clear savings potential in the gearbox. The hydraulic multi-plate clutch impresses with its comprehensive service friendliness. The plate pack, which is wear-free ...

... necessary if the clutch has to be disengaged whilst the machinery is running or if the driven shaft must be held stationary whilst the clutch is disengaged. (If the driven shaft can be rotated by the ...

Torque: 60 Nm - 24,000 Nm
Rotational speed: 390 rpm - 5,400 rpm

... the casing when the clutch is disengaged. The contact forces in the system cancel each other out, there is no axial loading of the machine bearings when the clutch is engaged. Conax® slipping clutch ...

Torque: 0.34 Nm - 3,114 Nm

Magnetic Disc Clutches Applications The contactless transmission of torque through claddings of various kinds allows for example: Power transmission for pumps, agitator assemblies and compressors into closed liquid filled ...

Torque: 18.5 ft.lb - 2,899 ft.lb
Rotational speed: 1,400 rpm - 5,000 rpm
Power: 15 W - 100 W

Clutch is designed for high torque small space environments where no slip is desired. Clutch can be used dry or in an oil bath. A zero backlash option is available. Zero drag torque when clutch ...

Rotational speed: 1,800 rpm

The 1207 series pneumatic cone clutch offers 10 times the heat dissapation as the 1307 series cone clutches with up to 160 BTU/hour at 1800 RPMs. • 1/2- and 5/8-inch bore sizes • High torque with no slippage • Fast ...

Torque: 15.83 ft.lb - 1,767 ft.lb

... linear in response to air pressure applied. Mounting Standard Series Through Shaft Mount Through/Mid Shaft or End Shaft. Clutch slides on shaft and is fixed with set screws and a customer supplied key. Anti-rotation ...

Torque: 1.25 Nm

BI-DIRECTIONAL NO-BACK CLUTCH SR2 provides controlled motion to adjust height at any position. Through its inverse interrupting mechanism, this breakthrough technique conducts driving from the input shaft to the output ...

Industrial Friction Materials clutch relining services will reline any kind, size or type of clutch from a small centrifugal sewing machine clutch to a large 14” tractor disc clutch ...

Torque: 0.1 Nm - 10 Nm
Rotational speed: 3,000, 3,600 rpm

... back-up fail safe mechanism. The clutch can be designed to engage at a specific RPM and slow the decent of the load. A lift system manufacture has recently redesigned their product to incorporate a centrifugal clutch ...

Torque: 1 Nm - 23,000 Nm
Rotational speed: 550 rpm - 5,000 rpm

Torques 1–23.000 Nm Properties compact design low cost slipping clutch for simple applications high power density, up to 23.000 Nm Applications/Specific features shaft-/shaft-connections direct overload protection ...

Torque: 44.1 Nm - 2,120 Nm
Rotational speed: 1,300, 1,500, 1,800 rpm

The FKE is best suited for applications with light starting and stopping loads. It is also commonly used as a slip clutch or tension brake within light horsepower and torque applications.

Torque: 7.5 Nm - 3,000 Nm

... H Coil Insulation (180 °C) Special Coated Metal Parts Quiet Operation Regime 24 V DC Standard Operating Voltage The clutch is provided with the help of the pulling force provided by the magnetic field generated ...

Electromagnetic clutch is a key component widely used in lawn mowers, which can reliably transmit torque and provide deceleration and braking capability, ensuring the stability and safety of the equipment. The electromagnetic ...

Torque: 11,100 Nm
Power: 91,000, 59,000 W

The Friction clutch is indispensable in certain agricultural implement applications. The friction clutch is the only torque limiter that has the ability to continuously transmit power ...

Torque: 220 Nm - 4,500 Nm

... assumes the function of maneuvering the ship, enabling the vessel and its crew to reach the next secure harbor. The KAZ clutch works in an opened state as a combined supporting and axial bearing. The propeller thrust ...