- Hydraulics - Pneumatics >
- Valve >
- Manual valve >
- TESCOM
TESCOM manual valves
DN: 3.2, 4, 6 mm
Pressure: -100,000 Pa - 1,000,000 Pa
Temperature: -5 °C - 60 °C
2/3-Port Mechanical Valve with One-touch Fitting VM100F ・Built-in One-touch fitting reduced installation space and less piping work ・Space saving Built-in One-touch fitting Approx. 35% reduction (25.8 mm shorter) ・Lightweight With ...
SMC PNEUMATIC
DN: 100 mm - 400 mm
Pressure: 0.2 bar
VFP/VFPX Butterfly Valves can be fitted beneath hoppers, bins, silos, screw or other type conveyors, or to intercept pneumatic conveying ducts. Due to their special design material residue between valve ...
WAMGROUP S.p.A
DN: 240 mm - 600 mm
... hoppers, or bins, VFF Silo Closure Butterfly Valves are used in all types of building material processing plants where interception of gravity-fed dry materials is required. VFF-type Silo Closure Butterfly Valves ...
WAMGROUP S.p.A
DN: 100 mm - 140 mm
Pressure: 2.5 bar
Temperature: -20 °C - 90 °C
VW Butterfly Valves are the ideal solution for the interception of gravity-fed or pneumatically conveyed dry powders or granules in a variety of bulk solids handling and processing plants. VW Butterfly Valves ...
WAMGROUP S.p.A
DN: 16.5 mm - 220 mm
Pressure: 16 bar
Temperature: -20 °C - 85 °C
Transair valves are designed for quick and easy intégration into a Transair system. Valves are an important addition to any compressed air system to stop the flow of air to certain parts of the system. ...
Parker Legris
DN: 8 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 143 °C
... diaphragm valve Type 2032 consists of a pneumatically operated piston actuator, a diaphragm and a T-valve body. The proven and robust actuator with a plastic housing ensures use in hygienic or aggressive ...
BÜRKERT FLUID CONTROL SYSTEMS
Pressure: 1, 0.7 MPa
Temperature: -5 °C - 60 °C
• Rotary hand valve • Slide ring design • Body / panel mounted • 2 / 3 positions selectable • Large / red handle options.
DN: 1.79, 0.5, 2.125, 0.875 in
Safe construction for the most demanding requirements Danfoss ball valves, type GBC, are manually operated shut-off valves suitable for bi-directional flow. The GBC valves ...
DANFOSS Refrigeration & Air Conditioning
Pressure: 120, 30 bar
Temperature: -40 °C - 80 °C
Flow rate: 2 l/min
... pressure-reducing valves are a type of pressure control valve. They manually and continuously operate hydraulic actuators at a distance. The proportional pressure-reducing valve type ...
DN: 80 mm - 1,200 mm
Pressure: 50 bar
Temperature: -196 °C - 260 °C
Triple-offset butterfly valve, metal-seated (fire-safe), without gland packing, maintenance-free, with lever or manual gearbox, pneumatic, electric or hydraulic actuator. Body made of steel or stainless ...
KSB S.A.S. - France
DN: 15 mm
Pressure: 68 bar
Temperature: -20 °C - 200 °C
Introducing the RS PRO general purpose manual ball valve designed for industrial applications. Manual ball valves are used to operate shut off valves ...
DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, ...
SISTO Armaturen S.A.
DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C
SISTO-C ● Soft-seated shut-off valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to ...
SISTO Armaturen S.A.
Pressure: 0 bar - 20 bar
Temperature: -20 °C - 160 °C
SISTO-CY ● Soft-seated shut-off valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to ...
SISTO Armaturen S.A.
DN: 0.25 in - 4 in
Pressure: 7, 10 bar
Temperature: -17 °C - 175 °C
Valves / Ball Valves Ball valves offer great economy and durability for a wide range of applications that do not require clean-in-place (CIP) service. They are easy to install and ...
Waukesha Cherry-Burrell
DN: 12 mm - 152 mm
Pressure: 0 bar - 10 bar
Temperature: 93 °C
Valves / Butterfly Valves Butterfly Valves offer great durability and ease of use for a wide range of services. Features Easy to install and maintain, butterfly valves ...
Waukesha Cherry-Burrell
DN: 38 mm - 102 mm
Pressure: 6.9 bar
Temperature: 80 °C
Valves / Relief Valves For installation on pump suction lines, the 40CF-AR Air Vent Valve is designed to operate as a CIP return air relief, and operates against either vacuum or positive ...
Waukesha Cherry-Burrell
DN: 1, 0.75, 0.5 in
Pressure: 350 bar
Flow rate: 180, 120, 80 l/min
Circuit selector valve, manual operation maximum pressure
DN: 0.5, 0.75, 1 in
Pressure: 500, 350, 400 bar
Temperature: -20 °C - 125 °C
Pilling-Up directional control valve single or double acting. From 1 to 7 sections, with relief valve and multiple configuration options.
DN: 0.75, 0.5, 1 in
Pressure: 500 bar
Flow rate: 100, 80, 180 l/min
Constant openning valve, 3 way, made in steel for working with high pressure.
DN: 6 mm - 40 mm
Pressure: 1.5 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation ...
WITT-Gasetechnik
DN: 6 mm - 40 mm
Pressure: 40 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation ...
WITT-Gasetechnik
DN: 10 mm
Pressure: 0 bar - 40 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation ...
WITT-Gasetechnik
DN: 0 mm - 1.5 mm
Pressure: 0 bar - 34.7 bar
The needle valve is an adjustable orifice, which can be used to control flow rates, mini-cylinders, nozzles, timing circuits, filling heads, bleed vents, and in many other applications. The adjusted flow remains stable ...
Beswick Engineering Co, Inc.
DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar
The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve ...
Beswick Engineering Co, Inc.
DN: 0 mm - 0.81 mm
Pressure: 135 psi
Flow rate: 0 ft³/h - 20 ft³/h
The PCFCD-1N1 is designed to maintain a constant flow rate, which the customer can adjust, regardless of upstream or downstream pressure variations. It works with both liquids (incompressible fluids) and gases (compressible fluids) but ...
Beswick Engineering Co, Inc.
DN: 0.5 in
Pressure: 30 psi - 125 psi
Walchem’s economical Tri-Purpose Valves are three valves in one. Installed in one direction, the spring loaded PTFE faced diaphragm provides 30 psi of back pressure and anti-syphon protection. Installed ...
DN: 0.75, 0.5 in
Pressure: 150, 300 psi
Temperature: 358, 550 °F
... Control Four-V Port Globe Valves are equipped with a micrometer dial and pointer which enables the valve to set within 1/100th of a turn of the handwheel. This allows you to fine-tune the blowdown flow ...
Pressure: 30 psi - 150 psi
Walchem’s Multi-Function Valves (MFV) provide anti-syphon, back pressure, bleed, drain and pressure relief for your 11, 16 and 21 size E class metering pumps. These valves will prevent syphoning when ...
DN: 0.063, 0.125 in
Pressure: 0 bar - 8.6 bar
Plastic Needle Valves are an adjustable method of flow control. Internally, the pin and body create an adjustable orifice that restricts flow. Useful for instances when the exact flow rate hasn't been determined or to ...
DN: 2 in - 36 in
M&J Valve Expanding Gate (EG) valves can be used in wide range of critical applications, from pipelines to power plants, in ESD and other demanding isolation applications. Description The M&J Valve ...
Celeros
DN: 3 mm - 24 mm
M&J Valve's high quality 4-way diverter valve system is specifically designed for the rigid requirements of bi-directional meter proving. The M&J 4-Way Diverter Valve is the heart of ...
Celeros
DN: 2 mm - 30 mm
This bi-directional valve is ideal for controlling varying flow rates of gas, liquid and slurries. Rangeability in excess of 350 to 1 Cavitation and noise reduction trim available Bi-directional ...
Celeros
DN: 8, 12, 10, 6 mm
Pressure: 4, 10 bar
... via an integrated 1/4 turn isolation valve John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John ...
DN: 0.25 in - 2 in
Pressure: 1,200 psi
Temperature: -60 °F - 450 °F
Part Material Body - CF8M or SUS316 Body Cap - CF8M or SUS316 Bail - CF8M or SUS316 Retainer - CF8M or SUS316 Stem - SUS316 Seat - PTFE+15% GF Seal - PTFE Thrust - PTFE Stem Packing - PTFE Stem Gland - SUS304 Stem Nut - SUS304 Handle ...
Golden Mountain Enterprise
DN: 0.25 in - 2 in
Pressure: 2,000 psi
Handle Gland - Vinyl Plastic - Handle - SUS304 - C.S. Plated Stem - SUS316 - C.S. Plated Handle - SUS304 - Gland - SUS316 - C.S. Plated Packing - Glass Filled PTFE - Thrust Washer - Glass Filled PTFE - Seat - Carbon Fibre Keinf ...
Golden Mountain Enterprise
DN: 0.5 in - 3 in
Pressure: 600 psi
* Investment casting, ASTM-A351, CF8M, Class 600, inside screw and screwed bonnet wedge dise. Intégral seat, Nonrising stem, and Handwheel. Body - CF8M Bonnet - CF8M Disc - CF8M Stem - SUS316 Gasket - Teflon Snap Ring - SUS316 Washer ...
Golden Mountain Enterprise
... factors such as the flow conductance and leak-tightness of valves are of great importance. The valves of Leybold are optimized with regard to these demands. For every flange system there are a lot of ...
Leybold
DN: 0.75, 0.562, 0.375, 0.25, 1 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped ...
Maximator GmbH
DN: 0.11 in - 0.56 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... thus a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped ...
Maximator GmbH
DN: 0.25 mm - 14.3 mm
Pressure: 2,500 bar
Temperature: -252 °C - 650 °C
The 36V system is a stainless steel valve that can be operated using a regulating shaft. It has non-rotating stem that provides dependability, and long service lifespans of the device. It can withstand extreme working ...
Maximator GmbH
DN: 2 in - 12 in
Pressure: 420 bar
... guidelines). Up to 15° from the vertical axis for the 6” bonnet (not BS6364 compliant). Flow direction indicators (for valves with preferred flow direction) Highly visible arrows on body and bonnet top. “T” mark ...
HABONIM
DN: 0.5 in - 2 in
Habonim’s DC47 Diverter Cryogenic line is extremely flexible and space saving valves. It’s enable the piping and machine designer to save valves, space, flow elements, while enhancing safety and simplicity. Special ...
HABONIM
DN: 0.25 in - 4 in
... safer operation in constrained spaces. Variety of ball configurations for different flow patterns in both automatic and manual configurations. Special mechanical design and construction Solid one-piece high torque ...
HABONIM
DN: 6, 12, 16, 10 mm
Pressure: 0 bar - 69 bar
Temperature: -20 °C - 190 °C
BALL VALVE FOR TWIN FERRULE FITTING - STAINLESS STEEL 316
BENE INOX
DN: 10, 15, 8, 25, 20 mm
Pressure: 63 bar
Temperature: -20 °C - 150 °C
MINI BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - STAINLESS STEEL 316
BENE INOX
DN: 8 mm - 50 mm
Pressure: 55 bar
Temperature: -20 °C - 150 °C
1 PIECE BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - LOCKABLE HANDLE - STAINLESS STEEL 316
BENE INOX
DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C
... (air) or 3.5 LPM (water) Valves are offered in straight (T) and 90 degree (L) flow patterns. All valves are supplied with 1/8” FNPT inlet and outlet ports. Valve cartridges are ...
DN: 0.75 in
Pressure: 0 bar - 138 bar
Temperature: 0 °C - 200 °C
... replacement valve with Brooks® purge meters. The Cartridge III Valve is a multipurpose valve, designed for use with Brooks® purge meters in gas and liquid flow applications. It is ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining