- Hydraulics - Pneumatics >
- Valve >
- Threaded valve >
- TESCOM
TESCOM threaded valves
DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F
The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with NIBCO® Series 2000 ...
NIBCO
DN: 100 mm - 200 mm
Pressure: 16, 10 bar
Temperature: 50 °C
Resilient-seated gate valve system with a flexible and modular design for up to five flange components. Special distribution cross for four flanged connections, four house connections and one underground hydrant. Suitable ...
DN: 0.25 in - 2 in
Pressure: 2,000 psi
... ASTM-A351-CF8M, EN10213 1.4408), AISI-304 (ASTM-A351-CF8, EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded end,Blow-out proof stem Polished surface (stainless steel only),
BOLA-TEK Mfg.Co
DN: 10 mm - 50 mm
Pressure: 25 bar
Temperature: 0 °C - 120 °C
... over the valve Versions with and without pressure measurement nipple The valve is closed when the spindle is moved in Closing against the pressure Slight adaptation of the proven SAUTER actuator technology Regulating ...
Fr. Sauter AG
DN: 0.375 in
Ball valve • Very suitable for quick shut-off valve (open-close) • Can be operated under maximum pressure • Connection: 3/8" NPT female (2x)
Holmatro Industrial equipment
DN: 8 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 200 °C
Ball valves with internal and external threads, with cutting ring threaded joint, pressure gauge ball valves and measuring lead plug valves In the on/off operation ...
Pentair Valves & Controls
DN: 4 mm
Pressure: 500 bar
Positive overlap with threaded connections to DIN ISO 228 (BSP), ANSI B1.20.1 (NPT), SAE J 514 (UN/UNF), ISO 8434-3 (ORFS), DIN 2353/ISO 8434-1 (24° taper, light and heavy series) Ball Valve Mild Steel, ...
STAUFF
DN: 20 mm
Pressure: 16 bar
Cepex offers a complete range of valves for the irrigation world, including hydraulic valves, angle seat valves (in several versions), and air release valves.
Cepex SER
DN: 0.25 in - 2 in
Pressure: 400 psi
Threaded, 2-Piece, Std. Port, Bronze Ball Valve, 400 CWP, Sizes: 1/4" to 2" (DN 8 to DN 50)
Conbraco Industries
DN: 12 mm
This is the LBS-PN 64 series of ball valves from FG Inox. It is engineered from an AISI 316 stainless steel and is made with a female threading type on both ends. The series comes in 8 variants that have diameters ranging ...
DN: 101.6 mm
Pressure: 345 bar
Temperature: -40 °C - 204 °C
The EV20-S34 is a screw-in, cartridge style, hydraulic directional element. It is a spring biased blocking valve which will shift to allow full flow from port 1 to 2 only when port 3 is vented to create a pressure drop ...
HYDRAFORCE
DN: 25 mm - 500 mm
Pressure: 10 bar - 50 bar
... actuated on/off valves. The ball valve meets ISO standards. The valve is available with threaded ends, welding ends or flanges. It is also possible to combine different ...
SOMAS
DN: 150 mm
... any effort. A large number of in and outlet connections can be provided: threaded BSP or NST-NH, or standardised couplings. Maximum working pressure: PN16 Valve type: ball valve Operation: ...
DN: 15 mm - 50 mm
Pressure: 16 bar - 32 bar
Temperature: 180 °C - 205 °C
Screwed Female End Body With Cylinder Actuator For On-Off, Mixing or Diverting Application Body and End Piece: Investment casted ASTM-A, 351CF8 (St.St. 304) /CF8M (St.St. 316). For control of steam air, hot water, oil gas, hydraulic oil. ...
Avcon Controls PVT. Ltd.
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 420 bar
Temperature: -20 °C - 400 °C
The CP-06 offer a wide array of needle valves that are specifically constructed to be applied with liquids that both posses high pressure and temperature service. Fabricated from AISI-36 stainless steel, these valves' ...
TECVAL, S.L.
DN: 0.375 in
Flow rate: 7 us gal/min
... Controls surges by restricting flow if it exceeds 7 gpm. When flow subsides, valve reopens automatically. Has 3/8" NPTF male end to thread into return port of system control valve, and ...
DN: 0.375 in - 2 in
The Omni plastic manual valves are economical, one-piece valves that cannot be taken apart. Omni plastic manual ball valves are molded body design quarter turn valves ...
Asahi/America, Inc.
DN: 20, 25, 40, 50 mm
Pressure: 16, 10 bar
Temperature: 0 °C - 80 °C
... pump stop, there will be négative pressure inside of pipeline, it may happen libation or break, now the exhaust valve and air suction valve will suck air speedy, keep the pipeline safety.
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 440 bar
Temperature: -29 °C - 38 °C
... of GAUGES VALVES: Option with purge Option with check flange with sealing plug to fit a standard pressure gauge. Option with M20x150 test bore Pneumatic piston valve. Benefits Pressure ...
Redfluid SL
Pressure: 0 bar - 40 bar
Temperature: -20 °C - 120 °C
Ball valves - 100 series Areas of application : compressed air, oil, water Technical features - nickel plated brass body - chrome plated brass ball - ball sealings : PTFE - aluminium handle - oil-proof rubber ...
SENGA
DN: 15 mm - 100 mm
Pressure: 6 bar - 16 bar
Temperature: 0 °C - 120 °C
... international standard. The main types of plastic valves are ball valves, butterfly valves, check valves, diaphragm valves, gate valves ...
SuZhou KoSa Environmental Protection CO.,LTD
Pressure: 125 psi
Nickel plated brass micro needle valves offer adjustable flow in a small package. MNV-10-32MM 10-32 Male UNF x 10-32 Male UNF Max Pressure 125 psi Orifice Size Flow Coefficient: Cv: Cracking Pressure Currently ...
Valve Check, Inc
DN: 32 mm
Pressure: 40 bar
Temperature: -20 °C - 170 °C
ball valve made of brass DN32 - 1 1/4" inch full port design seal made of 2xO-ring FKM for liquid and gaseous media Seal steam: - 2xO-ring FKM body material: - CW617N chrome plated ball material: - CW617N chrome ...
NieRuf Gmbh
DN: 8 mm
Pressure: 10 bar
Temperature: -10 °C - 90 °C
Diverter ball valve for panel, female threaded and hand wheel.
Rubinetterie Bresciane
DN: 8 mm - 150 mm
Pressure: 10 bar - 40 bar
Temperature: -196 °C - 300 °C
... port way Ball Type Floating ball,fixed ball,V-shaped ball valve,The 3-way ball valve Stem Blowout-proof stem Seat Sealing Integral body seat ,seat welded and overlaid Valve ...
Zhejiang Ouming Fluid Casting Industry Co., Ltd.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining