Weir electric pumps

Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW

HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...

Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW

HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...

Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW

PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control ...

Flow: 400, 350 m³/h
Pressure: 0 bar - 16 bar
Head: 160, 110 m

... within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Suitable ...

... within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Compact, ...

Flow: 0 m³/h - 800 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 160 m

Horizontal centrifugal pump to ISO 2858 (EN 22858 (DIN 24256)) and ISO 5199 Standardized and modular design Flanges according to ISO 7005 PN 16 For stainless steel execution 150 lbs ANSI B 16.5 available ...

Flow: 0 l/min - 2.1 l/min
Pressure: 0 mbar - 400 mbar
Fluid temperature: -25 °C - 55 °C

... range of -25 to 55 °C, with this unique set of features Disc Pump enables advances across a broad spectrum of Gas Sampling, Detection, Monitoring and Analysis applications. All of our pump designs ...

Flow: 0 l/min - 1.65 l/min
Pressure: 0 mbar - 300 mbar
Fluid temperature: 5 °C - 40 °C

... Micropump The BL Series Disc Pump, low cost micropump strikes a balance between performance and cost. Like all Disc Pumps, the Disc Pump combines silent operation, pulsation-free flow, ...

Flow: 0 l/min - 1.2 l/min
Pressure: 270 mbar
Fluid temperature: -25 °C - 40 °C

... Series Disc Pump – long lifetime micropump has been optimised for long service life, delivering in excess of 5,000 hours continuous operation under the most demanding conditions. Over 5,000 hours, cycling 20,000 times ...

Flow: 0 m³/h - 90 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C

... coupled internal gear pump for ultimate protection against leakage ED is for Environmental Duty. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with ...

Flow: 50 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 150 °C

Simple and compact construction for non-abrasive liquids General Purpose Internal gear pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes ...

Flow: 120, 100 m³/h
Pressure: 30 bar
Head: 65 m

... centrifugal pump designed for high media temperatures for boiler water application and district heating applications up to 180°C. Concept Features: • Duplex stainless steel shaft. • Closed impeller design to achieve ...

Flow: 0.35 m³/h
Power: 10 W
Fluid temperature: 80 °C

Ideal for the filtration of small volumes on standard cartridges (extruded or wound). Excellent chemical resistance Available in polypropylene or PVDF, this filter is resistant to both acids and bases. Long-lasting ...

Flow: 0.38 m³/h
Power: 10 W
Fluid temperature: 80 °C

Ideal for the filtration of small volumes on standard cartridges (extruded or wound). Excellent chemical resistance Available in polypropylene or PVDF, this filter is resistant to both acids and bases. Long-lasting ...

Flow: 1.5 m³/h - 4 m³/h
Power: 180 W
Fluid temperature: 110 °C

... strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...

Flow: 160, 200 m³/h
Head: 0 m - 30 m
Power: 16.1, 20.2, 28.4 kW

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...

Flow: 0 m³/h - 150 m³/h
Head: 0 m - 39 m
Power: 12.8, 10.4, 15.2 kW

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...

Flow: 0 m³/h - 150 m³/h
Head: 0 m - 22 m
Power: 8.7, 12.8 kW

... High depth kit Algae cutting blade Humidity and temperature sensor Jet Ring system Electric pumps are available in 50Hz and 60Hz versions. Pumps are CE certified. UL/CSA certification ...

Flow: 0 l/min - 135 l/min
Head: 1.8 m - 14.3 m
Power: 22 W - 365 W

Extremely reliable, compact mag. drive centrifugal pumps Due to the sealless construction a contamination of the surrounding area is avoided. Also corrosion, which could be depending ...

Flow: 1.14 l/h - 4.8 l/h
Pressure: 0 bar - 12 bar
Power: 15 W

The EJ Series provide precise chemical injection at a chemical injection with an economical cost. Universal voltage capability enables operation from 100 – 240 VAC in virtually all countries. The EJ Series are compact, simple to operate ...

Flow: 0 l/min - 5,000 l/min
Head: 0 m - 98 m
Power: 11 kW - 75 kW

... support structure enable motor removal safely without chemical leakage. ISO compliant The MDW is dimensionally compliant with the international standard (ISO2858, 3661) and is interchangeable with conventional ...

Flow: 0.00001 l/min - 0.861 l/min

This peristaltic pump is ideal for the simple conveying of all media. The pump drive of this model makes it possible to switch between a single channel and multi-channel ...

Flow: 0.004 l/min - 0.00415 l/min

This pump of the Hei-Flow Core series is particularly suitable when high volumes need to be transported easily. A flow rate of 4.0 - 4,151 ml / min can be set for this purpose. This model is designed for the use of single-channel ...

Flow: 0.00001 l/min - 0.00081 l/min

The pump drive of the model 120 of the Hei-FLOW Expert series can be operated with either single-channel or multi-channel pump heads. The flow rates with single-channel pump ...

Flow: 4.5 l/min - 5 l/min
Pressure: 9 bar
Head: 2.5 m

electric pump and 3 m outlet and suction hose and accessories: delivery gun, meter, suction accessories (depending on the model).

Flow: 10, 11, 13 l/min
Pressure: 0 bar - 15 bar
Power: 780, 600 W

Internal gear electric pumps for lubricants.motor depending on model, IP-55 protection and on/off switch. Cast iron pump body, sintered steel gears and by-pass valve. Motor ...

Flow: 32, 30 l/min
Pressure: 1.6 bar
Power: 260 kW - 500 kW

Multi-diaphragm pumps with no mechanical seals designed for dispensing AdBlue®/DEF. Pumps are self priming and have a by-pass valve. Electric motors have IP55 protection and include on/off ...

Flow: 7.6, 4.3, 2.6, 4.1, 7.1 l/min
Pressure: 500 bar - 4,136 bar
Power: 11, 75, 37, 22, 30 kW

... is a configurable designed water jet pump that can be custom built based on a variety of options to meet your cutting solution requirements. From the basic model to the fully loaded, the result is a waterjet pump ...

Pressure: 3,800 bar

... pressure of 4,136 bar, KMT WATERJET SYSTEMS offers the STREAMLINE SL-VI STD high pressure pump as a lower priced alternative still featuring KMT's advanced pump technology. The STD models can be operated ...

Pressure: 3,800 bar

... The NEOLINE pump has been developed with the aim of creating a robust, easy to operate pump. It is driven by a 40 hp (29 kW) three-phase motor which is equipped with vibration isolation ...

Flow: 0.1 us gal/min - 1,050 us gal/min
Pressure: 15 psi - 600 psi
Power: 0.5 ch - 5 ch

Mag Drive series are the first progressing cavity wobble stator pumps to offer magnetic drives. The proprietary, magnetic coupling design performs well in hazardous applications and is effective with ...

Flow: 0 us gal/min - 990 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F

Compact C Pump delivers reliable performance to the maximum duty requirements of your application in a compact package. Features include suction lift capability up to 28 feet, positive ...

Flow: 0 us gal/min - 4,500 us gal/min
Pressure: 0 psi - 1,500 psi
Fluid temperature: 14 °F - 230 °F

... changing pump arrangement to match the width of the TSF opening to the drop zone • Concentric rotation in a close tolerance pressure tube allows the TSF to generate positive stuffing pressure to the pump ...

Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW

Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the ...

Flow: 0 l/min - 870 l/min
Head: 0 m - 62 m
Power: 3.3 kW - 10.3 kW

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps ...

Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW

Immersion Pumps Our multistage pump models (S)TC25...(S)TC460 have been especially developed to supply internally cooled tools with coolant fluid. Closed impellers provide optimal hydraulic efficiencies ...

Flow: 0.5 l/min - 5.7 l/min
Pressure: 0 bar - 120 bar
Power: 0.06 kW - 1.46 kW

... decisive for the quality of the end product. The KF 0 stainless steel gear pump is particularly suitable for these applications. The KF 0 stainless steel is an external gear pump with flow rates of 1 ...

Flow: 0 l/h - 23 l/h
Pressure: 8, 5 bar

... Dura 5 peristaltic pump for high pressure low volume. Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint by ...

Flow: 0 l/h - 39 l/h
Pressure: 5, 8 bar

... 7 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint ...

Flow: 0 l/h - 222 l/h
Pressure: 6, 12 bar

... 10 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint ...

Flow: 5.4 l/min
Power: 100 W

... The connection technology of the pump head is designed for fast handling. The range of rotarus® products encompasses a comprehensive selection of single and multichannel peristaltic pump heads or piston ...

Flow: 10 l/min - 350 l/min
Power: 30 W

... The range of rotarus® products encompasses a comprehensive selection of single and multichannel peristaltic pump heads or piston pump heads. Pump heads from other manufacturers can also ...

Flow: 5.4 l/min
Power: 100 W

... touchscreen control unit. The pump head linking technology has quick handling assurance. The range of rotarus® products encompasses a comprehensive selection of single and multichannel peristaltic pump ...

Flow: 5 l/h - 8 l/h
Head: 2.5 m - 5 m

Servers & Data Center Liquid Cooling Pump Motor:bldc motor Application:High Density Server liquid cooling system Servers Liquid Cooling Pump Features: 1. DC brushless motor ...

Flow: 7, 12, 9 l/min
Head: 3, 5, 8 m
Fluid temperature: -40 °C - 100 °C

... Brushless DC 24V 12V Mini Water Pump Specification: voltage:12v or 24v flow rate: 7L/min 9L/min 12L/min water head:3M 5M 8M Feature: ◇Advanced magnetic driving technology for static-seal,without ...

Flow: 0 l/min - 6.5 l/min
Head: 2.5 m
Power: 5.16 kW

... brushless DC motor with long lifetime 20,000hours ●Heavy duty work,can sustain continuous 24hours work ●Special designed high efficiency closed-impeller for low power consumption ●Motor widely voltage designed suitable ...