Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW
HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...
Albin Pump
Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW
HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...
Albin Pump
Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW
PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: ...
Albin Pump
Flow: 1,500 m³/h
Pressure: 16, 35 bar
Head: 160 m
A sump pump designed to EN 733 (DIN 24255), ISO 5199 - ISO 2858 / EN 22858, API 610 / API 682. Standardized and modular design Magnetic driven option Customized sump depths up to 10 m Re-producible ...
Flow: 0 m³/h - 8 m³/h
Pressure: 0 bar - 25 bar
Fluid temperature: 250 °C
TopGear L-series is available in six different sizes. Shaft seal options include mechanical seals, packed gland and double flushed PTFE lipseals. Flange-mounted or bracket for foot-mounting, the TG L pedestal fits to IEC-flanged motors. ...
Flow: 70 l/min - 101 l/min
Pressure: 20, 50, 30, 40 bar
Power: 0.6 kW - 9.2 kW
diaphragms in NBR (Desmopan® and Viton available on request). Parts in contact with spray liquid: brass. Standard: pressure accumulator and safety valve. On request: PTO protection. Available versions with adjustment valves and pressure ...
Flow: 650 m³/h
Pressure: 1.5 bar - 8 bar
Head: 8 m
... and low flow resistance. Opposite inlet and outlet ports as standard. The discharge and inlet manifolds can rotate 180º for maximum pump installation versatility. These pumps are often ...
Flow: 0 us gal/min - 4,500 us gal/min
Pressure: 0 psi - 1,500 psi
Fluid temperature: 14 °F - 230 °F
The 2000 HS System combines high pump efficiency with low discharge pressure to provide unmatched performance in high solids sludge cake transfer. Compared to hydraulically driven, piston ram type pumps ...
NOV Inc.
Flow: 0 m³/h - 225 m³/h
Pressure: 0 bar - 12 bar
Fluid temperature: -10 °C - 100 °C
... reassembly time • Suction and discharge ports remain connected to the pipe work • Operational parameters are unaffected since design has no effect on flow and pressure • Low running speeds reduces wear for a longer ...
NOV Inc.
Flow: 0 m³/h - 215 m³/h
Pressure: 0 bar - 48 bar
Fluid temperature: -10 °C - 100 °C
... disconnect suction and discharge pipework, even when removing the screw conveyor • Detachable feed chamber supplied as standard • Side inlet port allows addition of thin sludge for blending and can also be used for ...
NOV Inc.
Flow: 16.2 l/min - 47.4 l/min
Pressure: 10 bar - 200 bar
Power: 0.7 kW - 12.5 kW
Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure screw pumps are designed for ...
Brinkmann Pumpen
Flow: 91 l/min - 194 l/min
Pressure: 10 bar - 120 bar
Power: 2.2 kW - 45 kW
Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure screw pumps are designed for ...
Brinkmann Pumpen
Flow: 40 l/min - 98.5 l/min
Pressure: 10 bar - 150 bar
Power: 1.1 kW - 30 kW
Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure screw pumps are designed for ...
Brinkmann Pumpen
Flow: 4, 3.4, 4.5, 3, 2.6 m³/h
Pressure: 7 bar
The C 30 series Neptune pneumatic water pump is an enhanced hose setup that generates 7 bar pressure rating. This system is mounted to a 5-meter hose which delivers the media into the pump. The compressed ...
Flow: 28, 33 m³/h
Pressure: 10 mbar
Weight: 21 kg
Cast iron pumping unit with a special flange/shaft pulley assembly. Aluminium oil/air separator eliminates oil mist discharge, air intake check valve, air cooling. First oil filling included. Accessories: Air ...
Srl
Flow: 40, 48 m³/h
Pressure: 10 mbar
Weight: 35 kg
Cast iron pumping unit with a special flange/shaft pulley assembly. Aluminium oil/air separator eliminates oil mist discharge, air intake check valve, air cooling. First oil filling included. Accessories: Air ...
Srl
Flow: 60, 72 m³/h
Pressure: 10 mbar
Weight: 38 kg
Cast iron pumping unit with a special flange/shaft pulley assembly. Aluminium oil/air separator eliminates oil mist discharge, air intake check valve, air cooling. First oil filling included. Accessories: Air ...
Srl
Flow: 450, 600 l/min
Head: 25.5 mm - 90.5 mm
Power: 1.5 kW - 15 kW
Centrifugal, monoblock and single-impeller electrical pumps with pump body, with connection to the motor by means of a support unit. With flanged inlet and delivery openings (PN 10 ) and threaded counter-flanges. ...
Flow: 3,000 l/min - 4,000 l/min
Head: 27.5 m - 58.8 m
Power: 11 kW - 37 kW
Centrifugal, monoblock and single-impeller electrical pumps with pump body, with connection to the motor by means of a support unit. With flanged inlet and delivery openings (PN 10 ) and threaded counter-flanges. ...
Flow: 0 m³/h - 0.6 m³/h
Pressure: 0.04, 0.05 MPa
Power: 5 W
EDLP 600 is a miniature diaphragm pump that is used in both companies and is designed according to the principle of a positive displacement pump. It is powered by the rotation of the ...
Flow: 0 m³/h - 110 m³/h
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C
Vertical in-line pumps Vertical and multistage centrifugal pumps. The in-line design enables the pump to be installed on pipes where the suction and discharge ports ...
Flow: 0.26 l/min - 8.5 l/min
Pressure: 50 bar - 700 bar
Length: 526 mm
The UPMD725 RC pump is a double-acting air-hydraulic pump with double pneumatic motor, pneumatic RC drive and 4/3 lever distributor hand valve Equipped with a pressure gauge, the oil ...
Flow: 450 l/min
Pressure: 8 bar
Head: 70 m
... It is possible to disassemble the valves for maintenance without disassembling the entire pump already installed on the plant. FAST UNLOADING AODD pumps are usually suffering from ...
Flow: 0 m³/h - 20 m³/h
Pressure: 8 bar
Head: 0 m - 25 m
... Stopping phase A small quantity of liquid is trapped into the pump to enable the next starting 2 | Priming Phase the impeller gives an accurate circulation of air + liquid mix moving air from the ...
Flow: 20 l/min
The solvent pump is ideal for pumping highly pure liquids. Solvents are easily filled with this pump which is foot-operated. It is built for industrial use and is huge yet durable. The discharge ...
Flow: 20 l/min
The V2A 1.4301 barrel pump from Bürkle is equipped with PTFE gaskets that allow minimal maintenance and long service life. Designed with stainless steel material, this pump is capable of handling flammable ...
Flow: 14 l/min
... with reusable pumps that the liquid being transferred will be contaminated by the pump, especially if the pump is used for different media or containers and it is not properly cleaned ...
Flow: 0 us gal/min - 5 us gal/min
Length: 191 mm
Width: 139 mm
... internally and externally Horizontal Suction and Vertical Discharge center porting with Optional Horizontal Side ports An integrated muffler, making it one of the quietest and most compact pumps ...
Flow: 0 us gal/min - 170 us gal/min
Pressure: 7 bar
Length: 742, 754 mm
... handling corrosive fluids and large solids that would clog other pumps, this unique pump has been engineered to fully function in any position. This plastic solids handling AODD pump ...
Flow: 0.0012 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 8.9 W
Compact hermetic pump for continuous dosage The micro annular gear pump mzr-2961 is suitable for handling crystallizing, oxygen or moisture sensitive liquids, because ...
HNP Mikrosysteme GmbH
Flow: 0 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W
Compact hermetic pump for diskrete dosage The micro annular gear pump mzr-2965 is suitable for handling crystallizing, oxygen or moisture sensitive liquids, because ...
HNP Mikrosysteme GmbH
Flow: 0.0048 l/min - 0.072 l/min
Pressure: 0 bar - 5 bar
Power: 8.9 W
Compact hermetic pump for continuous dosage The micro annular gear pump mzr-4661 is suitable for handling crystallizing, oxygen or moisture sensitive liquids, because ...
HNP Mikrosysteme GmbH
Flow: 0 m³/h - 2.6 m³/h
Input diameter: 1 in
Output diameter: 1 in
BARREL-EMPTYING MANUAL PUMPS Descriptive Suction pumps comprising: 1 metre 1” stainless steel pipe 2" false bung Discharge pump comprising: 1” ...
Pompes Japy
Flow: 0.6 m³/h
Manual piston pumps Descriptive Construction materials Rigid, 1 metre probe Flexible discharge pipe: 1.4 metres with spout Specifications and advantages Manual ...
Pompes Japy
Flow: 0.6 m³/h
Manual piston pumps Descriptive Construction materials Manual pump equipped with a flexible 1.6 metre probe Flexible discharge pipe: 1.5 metres ...
Pompes Japy
Flow: 14, 13 m³/h
Head: 11.5 m
Power: 0.48 kW
... has a smart design bottom plate that enables the pump to operate and drain down to 1 mm water level. The pump is equipped with a swing valve that prevents reverse flow from discharge ...
Tapflo
Flow: 30, 12, 19.5 m³/h
Head: 7 m - 21 m
Power: 0.25, 1.5, 0.75 kW
Pump body is made of rigid stainless steel, that makes it light and portable, and cast iron, for long lasting durability. A semi-open impeller made of high chrome alloy match with wearable plate (ductile iron) achieves ...
Tapflo
Flow: 18 m³/h - 147 m³/h
Head: 11 m - 40 m
Power: 1.5 kW - 11 kW
Tapflo SB is constructed in rigid cast iron Tapflo SB is constructed in rigid cast iron that makes the pump run problem free day after day. The pump has a greatly increased maximum submersion depth due ...
Tapflo
Flow: 0.3 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 5 °C - 50 °C
- Explosion-proof version according to ATEX for zone 1 - Peristaltic pump for wall or front-panel mounting - Safe condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - ...
Flow: 2,600 m³/h - 3,000 m³/h
Head: 40 m - 65 m
Output diameter: 350, 450 mm
RLSDP dredge pump is a new type of sludge pump researched & manufactured by our company basing on International (Warman) Gravel Pumps, aiming at rivers and seas out of repair. RLDSP dredge ...
Flow: 0 m³/h - 4,600 m³/h
Head: 0 m - 100 m
Fluid temperature: -10 °C - 180 °C
Volute casing pumps acc. to ISO 5199 Single Stage Pumps – LS, LC Horizontal single stage endsuction pump with closed impeller and oil lubricated bearing frame. Process design, back ...
LOWARA
Flow: 0 us gal/min - 4,000 us gal/min
... a double suction pump that has a vertically split casing perpendicular to the pump shaft. The suction and discharge flanges have been rotated 90 degrees to face up, resulting in an extremely ...
Jabsco
Pressure: 0 bar - 30 bar
Technical Features DISCHARGE/CYCLE 13 CC WORKING PRESSURE 30 bar (425 PSI) MAX RATIO 4.5 ÷ 1 AIR OPERATING PRESSURE DA 4 bar A 7 bar FROM 60 PSI TO 100 PSI RELEASE VALVE 0.7 bar (10 PSI) CYCLES NUMBER/MINUTE MAX 4 PLASTIC ...
I.L.C. srl
Flow: 0 l/h - 500 l/h
Head: 5 m
Power: 50 W
... allows a safe discharge of condensates and pressure release valve water. The pump Si-1800 collects condensates and pressure release valve water. A diffuser reduces the pressure of the water discharged ...
Please specify:
Help us improve:
remaining