Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power consumption ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 1.5 m³/min
Head: 0 m - 40 m
Power: 1.5 kW - 3.7 kW
... submersible three-phase automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to eliminate dry-running. ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... pump is a submersible single-phase portable residue drainage pump. The specially designed bottom plate enables the pump to drain down to 1mm water level. It has a swing check valve that prevents reverse-flow ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 4, 3.4, 4.5, 3, 2.6 m³/h
Pressure: 7 bar
... The C 30 series Neptune pneumatic water pump is an enhanced hose setup that generates 7 bar pressure rating. This system is mounted to a 5-meter hose which delivers the media into the pump. The compressed air connection ...
Flow: 9.3 m³/h - 37.2 m³/h
Pressure: 8 MPa - 35 MPa
Power: 110 kW - 200 kW
... high-pressure pumps are high-flow plunger pumps that absorb the technology of imported products and use finite element to check carefully. The liquid ends can be equipped with a valve disc structure or a conical valve ...
Flow: 9.3 m³/h - 37.2 m³/h
Pressure: 8 MPa - 35 MPa
Power: 110 kW - 200 kW
... high-pressure pump is a large-flow plunger pump that absorbs and borrows the technical characteristics of imported products and adopts finite element carefully checked. The hydraulic end can be optionally equipped with ...
... K25000 series high-pressure pumps are low-pressure and large-flow pump developed by our company. They use 250 power ends and match various transmission speed ratios. The maximum input power is 250kW. The liquid ends adopt ...
Flow: 0.26 l/min - 8.5 l/min
Pressure: 50 bar - 700 bar
Length: 526 mm
... pump is a double-acting air-hydraulic pump with double pneumatic motor, pneumatic RC drive and 4/3 lever distributor hand valve Equipped with a pressure gauge, the oil tank capacity is 25L and oil flow ...
Flow: 28, 33 m³/h
Pressure: 10 mbar
Weight: 21 kg
... Cast iron pumping unit with a special flange/shaft pulley assembly. Aluminium oil/air separator eliminates oil mist discharge, air intake check valve, air cooling. First oil filling included. Accessories: Air filter, ...
Srl
Flow: 40, 48 m³/h
Pressure: 10 mbar
Weight: 35 kg
... Cast iron pumping unit with a special flange/shaft pulley assembly. Aluminium oil/air separator eliminates oil mist discharge, air intake check valve, air cooling. First oil filling included. Accessories: Air filter, ...
Srl
Flow: 60, 72 m³/h
Pressure: 10 mbar
Weight: 38 kg
... Cast iron pumping unit with a special flange/shaft pulley assembly. Aluminium oil/air separator eliminates oil mist discharge, air intake check valve, air cooling. First oil filling included. Accessories: Air filter, ...
Srl
Flow: 0 m³/h - 2.6 m³/h
Input diameter: 1 in
Output diameter: 1 in
... BARREL-EMPTYING MANUAL PUMPS Descriptive Suction pumps comprising: 1 metre 1” stainless steel pipe 2" false bung Discharge pump comprising: 1” stainless steel ...
Pompes Japy
Flow: 0.6 m³/h
... Manual piston pumps Descriptive Construction materials Rigid, 1 metre probe Flexible discharge pipe: 1.4 metres with spout Specifications and advantages Manual piston pump Characteristics FLUID ...
Pompes Japy
Flow: 0.6 m³/h
... Manual piston pumps Descriptive Construction materials Manual pump equipped with a flexible 1.6 metre probe Flexible discharge pipe: 1.5 metres with spout Specifications ...
Pompes Japy
Flow: 36 m³/h
Pressure: 5 bar
Head: 25 m
... circulation application. Pump casing and impeller are made of CFPP(POM) material which is heat-resistant and corrosive-resistant for hot spring. It can avoid rusting problem with stainless steel or cast iron materials. 3. Discharge/suction ...
Flow: 6 l/min - 10 l/min
Pressure: 0.5 bar - 18 bar
Power: 0.38 kW
... integration.
MICRO GEAR PUMP Model Specification
Model code breakdown:
- 1 Pump Series: MPB = Rubber O-Ring Seal
- 2 Model/Displacement: 100 = 3.6 ml/rev; Maximum flow rate = 10 LPM
- 3
Flow: 0 l/min - 450 l/min
Head: 0 m - 32.5 m
Power: 1.1 kW - 2.2 kW
... These pumps are suitable to be used in domestic, agricultural and industrial applications when big deliveries are requested with medium discharge head. Available also with 2″ x 2″ inlet anda outlet. ...
STAC S.r.l.
Flow: 0 l/min - 180 l/min
Head: 0 m - 92.5 m
Power: 0.75 kW - 5.5 kW
... Double-impeller pumps suitable for agricultural, domestic and industrial use where high discharge heads are requested. ...
STAC S.r.l.
Flow: 0 l/min - 300 l/min
Head: 0 m - 56 m
Power: 0.75 kW - 4 kW
... These pumps are suitable to be used in domestic, agricultural and industrial applications when big deliveries are requested with medium discharge head. Available also with 2″ x 2″ inlet anda outlet. ...
STAC S.r.l.
Flow: 50 l/min - 5,500 l/min
Pressure: 17 bar - 350 bar
Length: 500 mm
... • Pump everything! The shearing impeller can shred and pump branches, algae, rags, ropes, bags and solid objects with dimensions up to 55 mm • High performance, weight/size/power ratio unmatched by other types ...
Flow: 60 l/min - 8,000 l/min
Pressure: 17 bar - 350 bar
Head: 39 m
... • Pump everything! The shearing impeller can shred and pump branches, algae, rags, ropes, bags and solid objects with dimensions up to 55 mm • High performance, weight/size/power ratio unmatched by other types ...
Flow: 50 l/min - 10,200 l/min
Pressure: 17 bar - 200 bar
Length: 380 mm
... the water close to the pump (a situation forbidden by law with electro pumps). • The piston engine guarantees maximum efficiency and the possibility of running the pump dry without damaging it. AP80 ...
Flow: 45 m³/h - 390 m³/h
Head: 23 m - 105 m
Power: 11 kW - 95 kW
... Close coupled pumps in compliance with EN733 - DIN24255 standards coupled to IEC standard electric motors through rigid coupling.<br> ...
Rovatti Pompe
Flow: 21, 180, 120, 42, 72 m³/h
Head: 46, 85, 83, 66, 50 m
Power: 4, 22, 9.2, 18.5 kW
... Single-stage close coupled electric pumps with axial inlet, scroll outlet and with impeller splined to the shaft.<br> ...
Rovatti Pompe
Flow: 50, 85, 120, 198, 315 m³/h
Head: 98, 150, 137, 142, 132 m
... Horizontal bareshaft single-stage centrifugal pumps with axial inlet and scroll outlet. Dimensions and performance according to EN733 - DIN24255 standards.<br> ...
Rovatti Pompe
Flow: 1 m³/h - 36 m³/h
Pressure: 16, 6, 10, 9 bar
Length: 445 mm - 906 mm
... double stainless-steel bellows that ensures durability, safety and product containment. The result is a pump that delivers very high suction and discharge pressures that allow it to self-prime and fully strip lines, a ...
MOUVEX
Flow: 70 l/min - 101 l/min
Pressure: 20, 50, 30, 40 bar
Power: 0.6 kW - 9.2 kW
... diaphragms in NBR (Desmopan® and Viton available on request). Parts in contact with spray liquid: brass. Standard: pressure accumulator and safety valve. On request: PTO protection. Available versions with adjustment valves and pressure gauge and ...
Flow: 25 l/min
Pressure: 1 bar - 8.5 bar
... absorber, emergency button for pump unit block and fixing brackets. The ARIEL-MAX contains an electronic management system, which allows you to: - detect fluid leaks inside the machine, blocking it automatically - automatic pump ...
Fluid temperature: 0 °F - 180 °F
... severe applications, this new pump ran longer and was easier to clean than the control group. Several improvements contribute to this longevity. The AP4 Ultra uses proprietary non-stick finishes on the float and discharge ...
QED Environmental
Flow: 0 m³/h - 120 m³/h
Pressure: 0 bar - 35 bar
... The FKL series features circumferential piston pumps designed for special pumping applications. These pumps operate at 35 bar maximum pressure with up to 120 m3/h flow rates. Available in ten different sizes, they can ...
FRISTAM
Flow: 171.7 m³/h
Pressure: 344.7 bar
Fluid temperature: -40 °C - 93 °C
... Williams Vmac™ Series model D is an Electric Driven, Chemical Injection, positive displacement plunger pump utilizing double spring loaded lip seals and an integral worm gear drive. It is available in 2 different standard gear ratios ...
... ; Applicable occasions - 1.Suitable for high-precision occasions such as precise quantification, liquid suction and discharge. ...
Keyto Fluid Technology
Flow: 0 m³/h - 100 m³/h
Pressure: 0 bar - 80 bar
... pharmaceutical and cosmetics industry. Low-impact delivery of products containing solids. CIP and SIP cleaning is possible, the pump is available as a mobile or stationary unit. Benefits and Characteristics optionally with ...
WANGEN PUMPS
Flow: 33.5, 25.4 l/min
Pressure: 75 psi
Head: 32'00" ft - 45'00"
... Integrity Series Pumps offer a flexible and robust solution to OEM applications. Constructed with a proprietary blend of PPS, the INTG3 is compatible with a wide variety of fluids. By manufacturing the motors and the majority of ...
Gorman-Rupp Industries
Flow: 1.5 us gal/min
Pressure: 30 psi - 70 psi
Length: 224 mm
... LEFOO demand delivery pump is a type of diaphragm volumetric pump. The diaphragm plays a sealing and protective role in isolating the transmission medium and the power end (motor). At the same time, the regular movement ...
LEFOO Group
Flow: 1,500 m³/h
Pressure: 16, 35 bar
Head: 160 m
... A sump pump designed to EN 733 (DIN 24255), ISO 5199 - ISO 2858 / EN 22858, API 610 / API 682. Standardized and modular design Magnetic driven option Customized sump depths up to 10 m Re-producible optimized hydraulics ...
Johnson Pump
Pressure: 30, 60 bar
Length: 240 mm
Width: 145 mm
... TestPower HP140 Flow rate: 62 cm³/Hub Dimensions: 240x145x610 mm ...
Flow: 0.02 us gal/h - 79.2 us gal/h
Pressure: 85 psi - 247 psi
Power: 62, 19, 110, 17 W
... IX Series pumps provide a solution to a variety of applications all in one pump. Key Benefits: 1000:1 Turndown Ratio IX Series pumps use efficient Brushless DC motors for speed control. High resolution ...
Walchem
Flow: 50 l/min - 510 l/min
Head: 0 m - 30 m
Power: 0.26 kW - 2.2 kW
... magnet pump which uses the pump casing divided into the front casing and the rear casing to form a vortex chamber as an ideal form. Therefore, the internal leak phenomenon, which means that the liquid getting out of the ...
IWAKI Europe GmbH
Flow: 3 ft³/h - 1,817 ft³/h
Head: 1.5 m - 88 m
... solids handling pumps have over 40 years of proven experience in the pumping of solids, slurries, sludge, pulp, trash, sewage and grit. These pumps are specifically designed to pass solids, trash and long, stringy materials. Discharge ...
Fairbanks Nijhuis
Flow: 0 us gal/min - 100 us gal/min
Pressure: 7 bar
Head: 70 m
... SANDPIPER 1½" S15 Non-Metallic AODD Pump provides unsurpassed fluid containment in the event a diaphragm is breached. This leak-free pump is designed to be driven by compressed air or nitrogen. Why Use Containment-Duty ...
WARREN RUPP
Flow: 0.2 l/h - 300 l/h
Pressure: 0.5 MPa - 1.7 MPa
Power: 110 W
... consumption by 70% compared to conventional spring-back designs. Smooth dosing with low impact Flow control is done by discharge speed adjustment only. This provides the smoothest injection at any flow rate. High ...
IWAKI
Flow: 0 m³/h - 19 m³/h
Pressure: 0 bar - 1,200 bar
Power: 0.1 kW - 35 kW
... versatile pump offers low life cycle costs and impressive energy efficiency. A true all-around talent for various applications. Thanks to the tried-and-tested modular system, ecoflow diaphragm metering pumps can be ...
LEWA GmbH
Flow: 2, 5 l/h
Pressure: 6, 5 bar
Fluid temperature: 0 °C - 100 °C
... easy-to-use equipment consisting of two dosing pumps and two parameters controllers designed to measure pH, Redox and Chlorine plus the temperature. Mainly conceived for pool’s industry, the dosing pumps are available ...
Etatron D.S.
Flow: 0 us gal/min - 100 us gal/min
Pressure: 0 psi - 60 psi
... friction radial water flow. • Noryl® impeller-diffuser assemblies are encased in a corrosion resistant stainless steel shell. • Pump and motor assembly are corrosion resistant. • Efficient operation in either horizontal or vertical ...
RED JACKET
Flow: 0.21 us gal/h - 2 us gal/h
Pressure: 50 psi - 250 psi
... EXCEL® AD is a solenoid pump that gives you improved electro-magnetics to meet your specific flow and pressure requirements, up to 250 psi (17.2 Bar) with capacities between .002 and 2.0 GPH (.8 to 7.6 l/h). The EXCEL AD pump ...
Flow: 12 m³/h - 900 m³/h
Pressure: 4 bar - 16 bar
Fluid temperature: 280 °C
... Leistritz screw pumps in the L2 range are twin-screw, single-volute, self-priming positive displacement pumps for the low-pressure range. They are used to pump slightly aggressive, slightly abrasive, ...
Flow: 0 m³/h - 504 m³/h
Head: 0 m - 105 m
... engine driven FEATURES • Horizontal DIN 24255 Electric Motor • 41 models • Wide choice of materials • Centreline discharge • Back pull-out rotating element can be removed without disturbing pipe work • Impellers cut to duty • ...
SPP Pumps
Pressure: 210, 160 bar
Power: 0 kW - 40 kW
Length: 326 mm
... Fixed Displacement Vane Pumps – PV2R12 Double Vane Pumps – These double pumps consist of two PV2R series single pumps combined in tandem within a single housing and driven by a common ...
YUKEN Europe Ltd.
Flow: 45, 20, 64, 102 m³/h
Pressure: 6.9, 5.2 bar
Fluid temperature: -50 °C - 230 °C
... The 34 Series™ internal gear pump is the perfect solution for asphalt, bitumen, tar, and more due to its robust cast iron construction and jacketing to rapidly deliver heat. Features & Benefits Fully jacketed pump ...
Viking Pump
Flow: 1,200 m³/h
Pressure: 16 bar
Head: 80 m
... standardized pump – Horizontal centrifugal pump with mechanical seal; designed to EN 22858/ISO 2858/ISO 5199 dimensional standards and requirements; complemented by size 40-25-125 and 40-25-160 pumps What ...
MUNSCH Chemie-Pumpen GmbH
Flow: 2.4 m³/h - 6.5 m³/h
Head: 0 m - 7 m
Power: 0.32, 0.2 kW
... run dry, the pump is automatically vented via an opening in the discharge elbow. The U3 K(S) must not be used for pumping wastewater containing faeces or wastewater from urinal systems If submersible pumps ...
JUNG PUMPEN
Flow: 200 m³/h - 5,500 m³/h
Head: 10 m - 150 m
Power: 2,500 kW
... the special requirement in contract; Pump casing is horizontal split, pump suction and discharge nozzles are both casted on the lower pump body, when checking inner pump ...
Shanghai Apollo Machinery Co., Ltd
the best suppliers