DN: 25 mm - 300 mm
Pressure: 16, 10, 6 bar
Temperature: -10 °C - 120 °C
General purpose valve with an EPDM liner, offering a long life with low maintenance. Self-lubricating bearings ensure perfect guiding and turning of the shaft without seizure or premature wear. These valves ...
pneumaticairactuator.com
DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C
304 SS Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical ...
pneumaticairactuator.com
DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C
Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical ...
pneumaticairactuator.com
DN: 25 mm
Pressure: 0 bar - 12 bar
Temperature: 0 °C - 130 °C
Tank blanketing valves are commonly used in tank storage systems to prevent and protect against explosions (avoiding flammable liquids being vented from a vessel), to control product contamination against external air ...
VALSTEAM ADCA Engineering S.A.
DN: 1 in
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 150 °C
... sanitary air vent is a self-acting valve designed for air venting applications with liquids. The valve closes when filled with liquid product. As the level falls, the valve opens if pressure ...
VALSTEAM ADCA Engineering S.A.
DN: 15 mm - 100 mm
Pressure: 40, 16 bar
Temperature: -60 °C - 400 °C
... V303 is a series of single seated, three-way globe control valves designed to ensure accurate control in mixing and diverting process engineering and industrial applications. These valves can be ...
VALSTEAM ADCA Engineering S.A.
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the construction according to API 600 and ASME B16.34 , API 598 Test second , size flanges according to ASME B16.5 , EN 1092-1 and ISO 7005 and spacings between flanges according to DIN 3202 , EN 558-1 ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...
Di Nicola Infinam Srl
ILN oil-air interlock injection valve High-performance grease injection valve, suitable for injection lubrication of medium and large gear surfaces.
DN: 3.96 in
Temperature: 35, 40 °F
... locomotive freeze protection valve in the world. This self-operating valve is designed to monitor the water temperature of the engine’s water-cooling system and automatically snap open to drain it if ...
Temperature: 35, 40 °F
The GURU® Valve DL2.1 CH and CHS Plugs are self-operating drain valves that are easily retrofitted into water-cooled air compressor heads to protect the compressors from freeze damage when a locomotive ...
DN: 0.5, 1, 2 in
Pressure: 24, 17.2 bar
Temperature: 121 °C
ThermOmegaTech’s thermostatic mixing valves/diverting valves use a thermal actuator to accurately proportion and maintain flow in response to temperature. These 3-way thermostatic valves ...
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
Hydraulic control valve used to control water level in tanks and reservoirs by means of a differential float valve. When the water reaches the upper preset level the valve closes completely ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve opens and closes in response to an electric signal by means of an incorporated 3 way solenoid (3/2). The signal can come from a controller, main switch, PLC, etc. Depending on the type of the solenoid the ...
A.G.P. VALVULAS 10 SL
DN: 50 mm - 600 mm
• DIN or ANSI flange connections • Robust, stainless steel shaft 304 • Manufactured in PVC-U body. PP / PP-GF • Gaskets in EPDM or FPM • Possibility of electric motor or pneumatic actuator DA, NA, NC • Manual lever ...
DN: 15 mm - 100 mm
Temperature: 0 °C - 120 °C
... PP or PVDF • Dimensions up to DN250 with handwheel • Gluing, soldering connections, with fixed DIN or ANSI flanges Advantage • Valve 2/2 way external regulation • Compact construction with high ...
DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C
... Standards • Designs: ANSI B16.34 ISO17292 API6D • Face to face ANSI B16.10 • Top flange ISO 5211 • Material according NACE MR-0175 • Testing API 598, ISO 5208 ...
DN: 0 mm - 800 mm
Temperature: 60 °C
... all these areas, Dueker valves – made of enamelled ductile cast iron – are unbeatable. And other aspects also come into play and are becoming increasingly important: cost-effectiveness and 100% recyclability – the butterfly ...
DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C
... soft seal (leakage rate A in acc. with EN 12266-1) Closing of the valve is dampened to reduce pressure surges in the pipeline Double seat – one valve instead of two separate valves ...
DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C
SAFETY QUICK-CLOSING BUTTERFLY FLAP VALVE TYPE PKIII Being part of the proven KÜHME high-performance valve series for industrial applications, the PKIII type is used in any application where safe and ...
DN: 200 mm - 1,000 mm
Pressure: 0 bar - 7 bar
Temperature: -25 °C - 180 °C
SAFETY QUICK-CLOSING BUTTERFLY FLAP VALVE TYPE PKIII/S Safety quick-closing butterfly flap valves are an integral part of the containment. The butterfly flap valves are used in the ...
DN: 65 mm - 300 mm
Pressure: 0 mbar - 1,600 mbar
Temperature: -15 °C - 60 °C
VMH Safety shut off valves, slow opening and fast closing with hydraulic or pneumatic actuator The VMH type valve is a safety shut off valve for gaseous media operated by hydraulic ...
Elettromeccanica Delta S.p.A.
... DN200 [from DN20 on request], full bore and equipped with EN1092-2 PN16 flanges. Face to face according to EN 558 Series 14. SFF ball valves are not suitable for choking: open or closed position is possible only. Special ...
DN: 100 mm
Multi-way ball valves from Böhmer, with three or four passages up to DN 100, are versatile in the truest sense of the word. Our valves are used for a variety of purposes. In shipping, for example, ...
... corrosion. Thanks to these features, Böhmer ball valves are among the few valves with API6D and API6DSS certification. For your application we deliver the ball valves with welding ...
DN: 10 mm - 250 mm
Pressure: 2 bar - 6 bar
... operated Pinch Valves. What are the benefits of air operated pinch valves? Free flow of product, minimum frictional resistance, 100% leak free, no blockages and low net weight are among the most important ...
AKO ARMATUREN
DN: 25 mm - 150 mm
Pressure: 6 bar
... air consumption! Air operated Pinch Valves with Flange Connection - VMC Series The air operated pinch valves of the VMC series are available in the nominal diameters ...
AKO ARMATUREN
DN: 40 mm - 300 mm
Pressure: 4, 3, 6 bar
... pinch valves have a very wide and practically unrestricted field of application. Furthermore, a selection of four different flange types supports the diverse range of application of the VF series air ...
AKO ARMATUREN
DN: 3 in - 8 in
Pressure: 20 bar
... BS6364 guidelines). Up to 15° from the vertical axis for the 6” bonnet (not BS6364 compliant). Flow direction indicators (for valves with preferred flow direction) Highly visible arrows on body and bonnet top. “T” ...
HABONIM
DN: 31.75 mm - 203.2 mm
Pressure: 50 bar
Temperature: -60 °C - 538 °C
... metal seated valves the right choice for the industry’s toughest applications. Materials: Stainless Steel, alloys, Carbon Steel – selected to meet temperature and application. ASME B16.34 listed cast or forged material ...
HABONIM
DN: 3 in - 6 in
Pressure: 20 bar
... Habonim metal seated valves the right choice industry’s toughest applications. Materials: Stainless Steel, alloys, Carbon Steel – selected to meet temperature and application. ASME B16.34 listed cast or forged material ...
HABONIM
DN: 40 mm - 300 mm
Pressure: 10, 25, 16 bar
Temperature: -10 °C - 90 °C
... opens at a given low water level. Maximum difference of level : 3,6 m. (Connecting pipe Ø4/6 mm from the pressure tap to the valve not included)
DN: 15 mm - 250 mm
Pressure: 16 bar - 40 bar
Temperature: -5 °C - 200 °C
... sides Special types ball valve Monoball KHO Pre-insulated design for plastic casing pipe systems Pre-insulated drainage and vent port with stainless steel for the plastic casing pipe systems Top ...
DN: 100 mm - 2,000 mm
Pressure: 10 bar - 40 bar
Temperature: 80 °C
Body material Ductile iron Disc material Ductile iron PN (End) PN40 End Flanged Contact sealing EPDM Operating system Manual gear box
TECOFI
DN: 2 in - 12 in
Pressure: 13.8 bar
405-NRS-RW: NRS Flanged Gate Valves Description: Series 405-NRS-RW NRS Flanged Gate Valves are used in irrigation and water distribution services. They feature an ...
DN: 40 mm - 150 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 200 °C
... actuator can be installée! on the valve. SPECIFICATIONS : • - Full bore • - Anti blow-out stem • - PTFE packing and stem O ring in FKM • - ISO 5211 mounting pad • - PN10/16 flanges R.F. ( accordmg ...
SFERACO
DN: 8 mm - 50 mm
Pressure: 64 bar
A-4BVG 90 ° switching, with flange for actuators to DIN / ISO 5211, with parallel BSP thread to DIN / ISO 228 Housing and ball made of 1.4408. Sealing material PTFE. Internal structure analogous to A-3BVGdc. H = height ...
Schwer Fittings
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
A-BV1-F One-piece housing, short body, open passage, with flange connection to EN 1092-1 PN16, with flange for actuators to DIN / ISO 5211 Housing and ball made of 1.4408. Sealing material ...
Schwer Fittings
DN: 15 mm - 100 mm
Pressure: 40 bar
Temperature: -20 °C - 160 °C
... A-BV2-F Open passage, flange connection to EN 1092-1 PN 16, length conforms to EN 558-1 Part 1-F4. Housing and ball made of 1.4408. Sealing material PTFE / glass fibre 15%. Maximum operating temperature 200 ° C. Ball ...
Schwer Fittings
DN: 40, 32 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
MAIN VALVE Housing (01), Flange (04): POM(polyoxymethylene). Screw (07): galvanized steel. Sleeve (08): see material selection. Port: Flange, (DIN PN 10/16). Ambient temperature: ...
DN: 50 mm - 150 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
MAIN VALVE Housing (02): Aluminum alloy. O-Ring (06): NBR (nitrile rubber). Sleeve (08): see material selection. Port: Flange, (DIN 2532 PN 10/16). Ambient temperature: -20° to +50°C. Media temperature: ...
DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h
... limited by the design of the valve. The valve seat and plug are made of ceramic or solid stellite materials, the mechanical performance of which assures high durability of the product. We can adjust ...
Zaklady Automatyki POLNA S.A.
DN: 300 mm
Pressure: 100 bar
2-directional valves are applied in gas engineering in case of a change in fluid flow direction in the installation. Basic design comprises passage cage valve DN300, PN100, Kv1350. The plug design ...
Zaklady Automatyki POLNA S.A.
DN: 200 mm
Pressure: 100, 80 bar
Flow rate: 175 m³/h
... on the type of valve. High pressure recovery valves (butterfly valves, ball valves) have a low FL value and are not suitable for operation under throttled flow and cavitation ...
Zaklady Automatyki POLNA S.A.
DN: 15 mm - 80 mm
Pressure: 100 bar - 420 bar
Temperature: -10 °C - 100 °C
Mounting holes on request Position switches on request Combinations on request Detent on request
MHA ZENTGRAF GmbH & Co. KG
DN: 13, 20, 25 mm
Pressure: 350, 320 bar
Temperature: -20 °C - 100 °C
Mounting holes Position switches Combinations Detent on request
MHA ZENTGRAF GmbH & Co. KG
DN: 25, 20, 13 mm
Pressure: 350 bar
Temperature: -30 °C - 100 °C
Mounting holes Position switches Combinations Detent on request
MHA ZENTGRAF GmbH & Co. KG
Please specify:
Help us improve:
remaining