Flange valves

DN: 80 mm
Pressure: 10 bar
Temperature: -40 °C - 180 °C

... Pressure - 10 bar •Lining - PFA •Housing Material - EN-JS 1049 •Face-to-Face - 177 mm • Flanges - DIN EN 1092-2, type B (ISO 7005-2 type B) PN 10 or flange drilled to ASME B16.5 Class 150 •Temperature Range - ...

DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar

... Inexpensive shut-off fitting in the hygienic product and CIP section Solidly designed valve disk Safe guidance of the disk thanks to bushes in the housing Seal with a small volume and extension gaps for compensating temperature ...

DN: 40 mm - 300 mm
Pressure: 10, 25, 16 bar
Temperature: -10 °C - 90 °C

... opens at a given low water level. Maximum difference of level : 3,6 m. (Connecting pipe Ø4/6 mm from the pressure tap to the valve not included) ...

DN: 4 mm - 32 mm
Temperature: -50 °C - 200 °C

... Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: 95, 150 °C

... Type 987 is a manually operated valve. This valve with non rising handwheel has a robust design which allows higher temperatures applications. It eliminates water hammer and allows the flow in both direction. This valve ...

DN: 100 mm - 2,000 mm
Pressure: 10 bar - 40 bar
Temperature: 80 °C

... Body material Ductile iron Disc material Ductile iron PN (End) PN40 End Flanged Contact sealing EPDM Operating system Manual gear box ...

DN: 40 mm - 150 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 200 °C

... actuator can be installée! on the valve. SPECIFICATIONS : • - Full bore • - Anti blow-out stem • - PTFE packing and stem O ring in FKM • - ISO 5211 mounting pad • - PN10/16 flanges R.F. ( accordmg to DN. flanges ...

DN: 60 mm

... Highly resistant gated valve with a monobloc body made in aluminium alloy hard anodised. It is available with different connections: swivel inlet female thread 2.5" NST-NH - outlet male thread 2.5" NST-NH or inlet with ...

DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C

... 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN 558-1, basic series 14 • Flanged ...

DN: 50 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 180 °C

... • wafer type butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN6/10/16, ASME/ANSI B16.5 class 150, ASME/ANSI B16.47 class 150 series A • face to face dimension according EN 558-1 ...

DN: 15 mm - 80 mm
Pressure: 100 bar - 420 bar
Temperature: -10 °C - 100 °C

... Mounting holes on request Position switches on request Combinations on request Detent on request ...

DN: 6 mm
Pressure: 700 bar
Temperature: -20 °C - 60 °C

... Our manual valve is designed for reliable use with single or double acting hydraulic systems. If desired, it is available with a lock function for secure load holding. Technical data Mounting face Cetop C DIN 24340-A6 (others ...

DN: 300, 250 mm

... manual exit valves for silos with cement, gypsum, building chemicals and similar bulk solids. BV2FF model: Double flange, upper flange square, lower flange round BV1FF model: Single ...

DN: 8 mm - 100 mm
Pressure: 40 bar
Temperature: -20 °C - 160 °C

... DESCRIPTION • 2-way ball valve BSP female threaded • Full bore • Body and ball Brass chromium plated, stem Brass nickel plated • Mounting flange ISO 5211 for direct mounting pneumatic or electric ...

DN: 0 mm - 10,000 mm
Pressure: 14 bar
Temperature: 71 °C

... standard.

DN: 10 mm - 200 mm
Pressure: 16, 25, 40 bar
Temperature: -20 °C - 180 °C

... The pneumatic ball valve is designed for efficient flow control in various industrial applications. It features a robust construction that ensures durability and reliability. The valve is easy to operate and maintain, ...

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the construction according to API 600 and ASME B16.34 , API 598 Test second , size flanges according to ASME B16.5 , EN 1092-1 and ISO 7005 and spacings between flanges according to DIN 3202 , EN 558-1 , ANSI B16.10 , ...

DN: 0.5 in - 8 in
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 180 °C

... 1. Full port ball valve, 2 pieces2. Flanged ends according DIN 2501-EN. PN40 DN 15 to DN 50 and PN16 DN 65 to DN 2003. Made of Stainless Steel Din 1.4408 (CF8M)4. Desing according DIN 3357 / ISO 57525. Face to face according ...

DN: 50 mm - 600 mm
Pressure: 16, 10 bar

... characteristics are essential for gate valves. We have therefore incorporated our many years of experience into developing our E3 gate valves to give them the finishing "Made for Generations" touch. The result: Hawle ...

DN: 2 in - 24 in
Pressure: 16 bar - 250 bar

... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically made from ...

DN: 0.25 in
Pressure: 25 MPa
Temperature: -20 °C - 80 °C

... be realized by controling theslow descending switch of the air valve. Equipped with check valve and adjustable relief valve to realize reliableprotection for the whole system. The valve ...

DN: 0.5 in - 6 in
Temperature: -20 °C - 150 °C

... ANSI FORGED STEEL LONG STEM BALL VALVE MLDQ41F-150 * In strict accordance with the standard of GB, JB, JIS, ANSI, KS, BS, DIN, API and etc. * Certification: ISO9001, BSCI, CE, ROHS, FCC, FDA etc ...

DN: 0.5 in - 4 in
Pressure: 10 MPa - 76 MPa
Temperature: -29 °C - 628 °C

... ASME B16.34 Valve body material: WB36/A105/F22 Flow characteristics: E%/L/Q Leakage level: ANCI FCI-02 V/VI Product Features 1. - Multi-stage pressure réduction structure principle to extend service life. 2. - The valve ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

... Flapcon® BA102 Series Monoblock flanged ball valves are manufactured from cast iron, cast steel and stainless steel castings. Thanks to full-bore ball construction, they provide high capacity permeability. Due to the ...

DN: 64 mm - 218 mm

... technology ab valve, split butterfly valve, Powder containment transfer valve Fast and secure transfer for large quantities Containment transfer Economic solution Supply solution for closed transfer ...

DN: 5 in - 72 in
Pressure: 150 psi - 450 psi
Temperature: 150 °C

... systems. The straight-through body design maximizes flow capacity and reduces head loss. Flanged or mechanical joint end connections are available. Eccentric Plug Valves are capable of handling clean and dirty liquids ...

DN: 32 mm - 700 mm
Pressure: 10, 16 bar

... Wafer centric butterfly valve The centric butterfly valve « GOLD range » is the basic solution for bidirectional isolation functions by means of a butterfly valve. It is the perfect choice for installation ...

DN: 15 mm - 300 mm
Pressure: 150, 300 psi

... of MNC 3 & 4 Way Ball Valve. This Ball Valve is available in sizes that range from 15 MM to 300 MM. Sturdy constructions, long service life, fine finishing are some of the main factors of our 3 & 4 Way Ball Valve. ...

... critical. Compared to standard valves, these valves provide a minimal dead space between screw and valve, which result in a higher mixing accuracy and optimal possibilities for cleaning. The main features ...

DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C

... The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve is equipped ...

DN: 2 in - 10 in
Pressure: 250, 500, 150 psi
Temperature: -30 °F - 200 °F

... TECVAL model VRLP Pressure Reducing Valve, reduces upstream pressure to a predetermined pressure set downstream in spite of changes in flow or upstream pressure. Devices in ductile iron ASTM A536 flanged according to ...

Pressure: 17.2 bar

... can independently activate an actuator to open the deluge valve: a pneumatic Dry Pilot detection Line and/or an electric solenoid, connected to sensorst hrough a control panel. Once open, the valve reduces the inlet ...

DN: 2.5 in - 16 in

... Corporation has introduced their new AWWA C515 Gate Valves. These new gate valves feature three different connection types such as push-on, flange x flange, and mechanical ...

DN: 15 mm - 250 mm
Pressure: 25, 16, 10, 40 bar
Temperature: -196 °C - 450 °C

... diagnostics of “ valve-actuator” system due to application of smart electro-pneumatic positioners high tightness of closure due to application of soft valve seats (with PTFE seals in the whole range of flows and characteristics, ...

DN: 8 mm - 100 mm
Pressure: 10, 25, 100 bar
Temperature: -220 °C - 200 °C

... Upstream vent hole for cavity relief in the closed position. PY4 CY: Stem extension avoids any stem freezing and allows easy valve operation. Approvals: PY4 CY design: EN1626 PY4 CY Fire Safe design: EN12567, ISO10497, API607 and ...

DN: 0.5 in - 4 in
Pressure: 16 bar

... attached to it closes or opens the passage hole in the housing. WARNING: The use of shut-off valves as control valves is prohibited. ...

DN: 160, 120 mm
Pressure: 15 bar
Temperature: -20 °C - 120 °C

... cavitation noise generated by the main engine; 4. The intake valve integrates a relief valve, a makeup valve, and an inverse proportional valve, with standard accessories: solenoid ...

DN: 15 mm - 100 mm
Pressure: 16, 25, 40 bar

... • Suitable flange:JB/T79. ASME B16.5. GB/T9113.HG/T20592. EN1092 • Seal material: Reinforced PTFE, Usage and construction: L style three-way ball valve can be used for changing the direction of the flow, connecting ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C

... EFFAST PVC-U valve BK1 is a true union ball valve ideal for heavy duty applications, chemical applications and water treatment. Technical features: Solvent welded sockets (ISO, BS, ASTM, JIS), threaded sockets (BSPP ...

Pressure: 250 bar
Flow rate: 0 l/min - 3 l/min

... Compensated double-acting flow control valves available in sizes 03 and 60. Max. working pressure 250 Bar, adjustable oil flow rate from 0,2 to 2,5 Lt./min. ...