DN: 0.5 in - 12 in
Pressure: 19.7 bar
Temperature: 0 °F - 400 °F
... The NIBCO® carbon steel, flanged end ball valve provides bubble-tight shutoff at 285 PSI. The one-piece valve is recommended for industrial, petrochemical, utility service applications. It conforms to ...
NIBCO
DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C
... 3202 / K1) Lug-type for flanges acc. to EN 1092-2 Centric disk, mounted in three maintenance-free bearing bushes For bolting between pipe flanges As end-of-line valve for flange ...
VAG-Group
DN: 15 mm - 500 mm
Temperature: -29 °C - 500 °C
... Metaltite® metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures Clean fluids, dirty fluids, high viscosity, scaling fluids, corrosive, erosive, ...
Pentair Valves & Controls
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 230 °C
... thread or flange Versions: 2/2-way or 3/2-way NC or NO For over 30 years, the ROCKY products have been marketed by AIRTEC and employed worldwide. Modern precision manufacturing methods and the very best materials guarantee ROCKY ...
AIRTEC Pneumatic
DN: 1 in - 8 in
... Flange, Full Port, Low Temp Carbon Steel Ball Valves, ASME Class 600. Sizes: 1" through 8" ...
DN: 20 mm - 100 mm
Pressure: 16 bar - 40 bar
Temperature: 150 °C
... regulator without auxiliary energy Nominal diameter DN 20...100 Nominal pressure PN 16...40 Three-way valve with flanges mixing valve / diverting valve Valve body made ...
DN: 8 mm - 50 mm
Pressure: 64 bar
... A-4BVG 90 ° switching, with flange for actuators to DIN / ISO 5211, with parallel BSP thread to DIN / ISO 228 Housing and ball made of 1.4408. Sealing material PTFE. Internal structure analogous to A-3BVGdc. H = height of centre axis ...
Schwer Fittings
DN: 50 mm - 200 mm
Pressure: 10 bar
Temperature: 10 °C - 80 °C
... • One piece PP - GR body. • Disc available in different materials (PVC-U, Corzan CPVC). • Ideally suited for flow control using minimal piping space. • 100% factory tested. • Minimal pressure drop. • Low maintenance. • Regulable opening every 15º ...
Cepex SER
DN: 15 mm - 80 mm
Pressure: 100 bar - 420 bar
Temperature: -10 °C - 100 °C
... Mounting holes on request Position switches on request Combinations on request Detent on request ...
MHA ZENTGRAF GmbH & Co. KG
DN: 25 mm
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 300 l/min
... Series VR5U08 Nominal Size Inch 1" mm 25 Maximum Flow gpm 80 lpm 300 Maximum Pressure psi 5000 bar 350 Mounting Flange ...
DN: 6 mm
Pressure: 700 bar
Temperature: -20 °C - 60 °C
... Our manual valve is designed for reliable use with single or double acting hydraulic systems. If desired, it is available with a lock function for secure load holding. Technical data Mounting face Cetop C DIN 24340-A6 (others ...
HYTORC-TECHNOLOGIES GMBH
DN: 80 mm
Pressure: 10 bar
Temperature: -40 °C - 180 °C
... Pressure - 10 bar •Lining - PFA •Housing Material - EN-JS 1049 •Face-to-Face - 177 mm • Flanges - DIN EN 1092-2, type B (ISO 7005-2 type B) PN 10 or flange drilled to ASME B16.5 Class 150 •Temperature Range - ...
Richter Chemie Technik
DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar
... Inexpensive shut-off fitting in the hygienic product and CIP section Solidly designed valve disk Safe guidance of the disk thanks to bushes in the housing Seal with a small volume and extension gaps for compensating temperature ...
Evoguard GmbH
DN: 40 mm - 300 mm
Pressure: 10, 25, 16 bar
Temperature: -10 °C - 90 °C
... opens at a given low water level. Maximum difference of level : 3,6 m. (Connecting pipe Ø4/6 mm from the pressure tap to the valve not included) ...
DN: 4 mm - 32 mm
Temperature: -50 °C - 200 °C
... Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...
Pfeiffer Chemie-Armaturenbau GmbH
DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: 95, 150 °C
... Type 987 is a manually operated valve. This valve with non rising handwheel has a robust design which allows higher temperatures applications. It eliminates water hammer and allows the flow in both direction. This valve ...
DN: 100 mm - 2,000 mm
Pressure: 10 bar - 40 bar
Temperature: 80 °C
... Body material Ductile iron Disc material Ductile iron PN (End) PN40 End Flanged Contact sealing EPDM Operating system Manual gear box ...
TECOFI
DN: 300, 250 mm
... manual exit valves for silos with cement, gypsum, building chemicals and similar bulk solids. BV2FF model: Double flange, upper flange square, lower flange round BV1FF model: Single ...
Özbekoglu
DN: 40 mm - 150 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 200 °C
... actuator can be installée! on the valve. SPECIFICATIONS : • - Full bore • - Anti blow-out stem • - PTFE packing and stem O ring in FKM • - ISO 5211 mounting pad • - PN10/16 flanges R.F. ( accordmg to DN. flanges ...
SFERACO
DN: 60 mm
... Highly resistant gated valve with a monobloc body made in aluminium alloy hard anodised. It is available with different connections: swivel inlet female thread 2.5" NST-NH - outlet male thread 2.5" NST-NH or inlet with ...
DN: 8 mm - 100 mm
Pressure: 40 bar
Temperature: -20 °C - 160 °C
... DESCRIPTION • 2-way ball valve BSP female threaded • Full bore • Body and ball Brass chromium plated, stem Brass nickel plated • Mounting flange ISO 5211 for direct mounting pneumatic or electric ...
Vapo Techniek B.V.
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the construction according to API 600 and ASME B16.34 , API 598 Test second , size flanges according to ASME B16.5 , EN 1092-1 and ISO 7005 and spacings between flanges according to DIN 3202 , EN 558-1 , ANSI B16.10 , ...
DI NICOLA INFINAM
DN: 0.5 in - 8 in
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 180 °C
... 1. Full port ball valve, 2 pieces2. Flanged ends according DIN 2501-EN. PN40 DN 15 to DN 50 and PN16 DN 65 to DN 2003. Made of Stainless Steel Din 1.4408 (CF8M)4. Desing according DIN 3357 / ISO 57525. Face to face according ...
Intertubi
DN: 50 mm - 600 mm
Pressure: 16, 10 bar
... characteristics are essential for gate valves. We have therefore incorporated our many years of experience into developing our E3 gate valves to give them the finishing "Made for Generations" touch. The result: Hawle ...
Hawle
DN: 2 in - 24 in
Pressure: 16 bar - 250 bar
... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically made from ...
Athena Engineering S.r.l.
the best suppliers