Flange valves

DN: 15 mm - 900 mm
Pressure: 1,600,000 Pa - 42,000,000 Pa
Temperature: -196 °C - 380 °C

... Ball Valve Body materials: carbon steel, stainless steel, alloy steel WCB, LCB, CF3, CF3M, CF8, CF8M, MONEL, and more. Valve Ball type: floating ball, trunnion mounted ball. Valve Manufacturing standards: ...

DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

... Full bore flanged ball valve PN16, in stainless steel A351-CF8M and blued carbon steel A352-LCB, with ISO 5211 pad and Antistatic Device. ...

DN: 2 in - 12 in
Pressure: 150 psi

... SIZE: 2＂～12＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC pneumatic butterfly valve ...

DN: 40 mm - 700 mm
Pressure: 4 bar - 16 bar
Temperature: -10 °C - 120 °C

... Temperature: -10 ° C + 120 ° C Flanges according to: PN10/16 above DN150 PN10 These valves are made of A-class quality and very suitable and applicable for: Bilge / ballast systems, loading systems, salt / fresh ...

DN: 25 mm - 300 mm
Pressure: 16, 10, 6 bar
Temperature: -10 °C - 120 °C

... General purpose valve with an EPDM liner, offering a long life with low maintenance. Self-lubricating bearings ensure perfect guiding and turning of the shaft without seizure or premature wear. These valves are supplied ...

DN: 40 mm - 300 mm
Pressure: 1.5 bar - 12 bar
Temperature: 40 °C

... The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any foreign energy. Application ...

DN: 1.5 in - 14 in
Temperature: 0 °C - 100 °C

... Ductile iron soft sealed gate valve Diameters from DN040 - 1½" to DN350 - 14" Flanged PN16 according to EN1092-2 (ex DIN2533) Lengths according to EN558-1 series 14 (ex DIN3202 F4) Epoxy coating (min. 250 μm) Non rising ...

DN: 40 mm
Pressure: 20 bar
Temperature: -29 °C - 120 °C

... We Provide Forged One-Piece Ball Valves, Forged Steel 1-Piece Ball Valves, 1-1/2 Inch, DN40, Class 150 LB, PN20, API 6D. Design Standard: API 6D. Face to Face: ASME B16.10. Test and Inspection: API 598. ...

DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C

... unstable factor, the trunnion ball valve downstream seat will be pushed by un-normal pressure, and the release the un-normally pressure automatically, it doesn’t damage to the sealing of upstream seat. 9) The valve ...

DN: 15 mm - 200 mm
Pressure: 40 bar

... Bolted yoke bonnet. • Rising stem and handwheel. • Stainless steel or PTFE sealings. • Distance between sides according to DIN 3202 F-1. ...

DN: 32 mm - 600 mm
Pressure: 16, 25 bar
Temperature: 70 °C

... Stainless steel spindle with rolled thread and bearing. Total sufrace rubbered wedge with replaceable spindle nut. Gate valve with full bore. All parts are protected against corrosion. Certificate CE Hygienic attest by PZH ...

DN: 15 mm - 300 mm
Pressure: 10 bar
Temperature: -40 °C - 120 °C

... Channel: Straight Through Type Structure: Fixed Ball Valve Function: Bypass- Valve Transport Package: Carton/Plywood Box Temperature: Normal Temperature Trademark: BAODI ...

DN: 0.25 in - 4 in
Pressure: 0 bar - 255 bar
Temperature: -269 °C - 230 °C

... Benefits Redfluid needle valves are designed to offer high performance. The closing by mobile obturation makes both the opening and the closing of the valve smooth, avoiding the seizure of the sealing seat. 100% ...

DN: 50 mm - 400 mm
Pressure: 10 bar
Temperature: 60 °C

... Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For all gases according to DVGW worksheet G 260 Safety shut-off valve ...

DN: 50 mm - 500 mm
Pressure: 6 bar - 10 bar
Temperature: 200, 70 °C

... Intermediate flange butterfly valve for shutting off dusty and powdery bulk materials. MATERIAL HOUSING :Aluminum cast MATERIAL SEALING DISC :Structural steel, stainless steelMATERIAL SEALING RING :PUR, VMQTIGHTNESS ...

DN: 15 mm - 300 mm
Pressure: 1 MPa - 4 MPa
Temperature: -46 °C - 600 °C

... Four-way ball valves are used in oil, natural gas, coal and ore mining, refining processing and pipeline transportation systems; in chemical products, medicine and food production; in hydropower, thermal power and nuclear power production ...

DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h

... This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, in the “close” ...

DN: 8 mm - 200 mm
Pressure: 0 bar - 100 bar
Temperature: -50 °C - 305 °C

... Rate A (no leakage) Flange / BW / SW / Tapped Options Heating jacket Sight Glass Check valve Electrical continuity Advantages Face to face: ISO5752-S01 (Flanged) Face to face: EN 12982 (BW/SW – stainless ...

DN: 15 mm - 40 mm
Pressure: 17 bar - 27.5 bar
Temperature: 204 °C

... ACV Series Control Valve for applications when central steam or steam under pressure is available. The valve uses our parabolic plug design, delivering immediate response and precise modulation of flow throughout the ...

DN: 0.5 in - 48 in
Pressure: 600 psi - 15,000 psi

... Pressure balance lubricated plug valves are metal seated valves providing a tight shut off ( 0 leakage ) sealing, valves shall be regularly lubricated along with their operation by injection of suitable ...

DN: 25 mm
Pressure: 16 bar
Temperature: 0 °C - 300 °C

... Flange-Globe valve DN 25 in straight through with bellow flange acc. DIN EN 1092 material grey cast iron DN-JL1040 with Isolation plug seal: - metal design: - straight through with bellow body ...

DN: 15 mm - 200 mm
Temperature: -20 °C - 185 °C

... : - -20°C~185°C Ball valve, the opening and closing member (sphere) is driven by the valve stem and rotates around the axis of the ball valve. It can also be used for fluid regulation and control. ...

DN: 2 in - 12 in

... Cast Steel Globe Valves Sizes: 2” - 12”Pressure: Cl. 150 - Cl. 2500Materials: Carbon and Alloy Steels,Stainless & Duplex SteelsEnds: Flanged, ButtweldOptions: Handwheel, Gear orMotor operated.Straight & Angle TypeBellow Seal, CryogenicService A ...

DN: 50 mm - 1,000 mm

... Segment Ball Valve is a high performance valve we have developed with advanced technology.It also called eccentric ball valve ,semi ball valve ,half ball valve ,C type ...

DN: 10 mm - 200 mm
Pressure: 16 bar - 160 bar

... Wafer type ball valve is a flange end 1pc ball valve with super-short one piece body design, has short distance between the valve seat and the end flange, less medium ...

DN: 8 mm - 150 mm
Pressure: 1,000 psi - 2,000 psi
Temperature: -196 °C - 300 °C

... The ball cover can be connected with the valve stem to form a 90 degree ball core structure. It is mainly used for pipeline switch, emergency cut-off, and ball core V-shaped opening can also be designed to achieve flow regulation function. Design ...

DN: 2 in - 7 in
Pressure: 2,000 psi - 15,000 psi

... gâte valve * There are rising stem gâte valve and non-rising stem gâte valve * According to the connection type, the gâte valve includes threaded gâte valve, flanged ...

DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C

... Standards • Designs: ANSI B16.34 ISO17292 API6D • Face to face ANSI B16.10 • Top flange ISO 5211 • Material according NACE MR-0175 • Testing API 598, ISO 5208 • API 6D upon request ...

DN: 0 mm - 800 mm
Temperature: 60 °C

... all these areas, Dueker valves – made of enamelled ductile cast iron – are unbeatable. And other aspects also come into play and are becoming increasingly important: cost-effectiveness and 100% recyclability – the butterfly valves ...

... DC24V Al-Alloy Material on-off electric butterfly Valve, electric actuator with Ce/CSA/RoHS Certificate Features: Name: On-off Electric Butterfly Valve Standard Time/Torque: 20S/50Nm Motor Power: 13W/10W/6W Rated ...

... The Pneumatic Flange Ball Valve is a a single-acting/double-acting valve composed of cast steel, WCB, and stainless steel. The actuator cover is made of aluminum alloy, and it has nominal dimensions of ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C

... Description 2/2-way valve Impulse without differential pressure Body Cast iron ...

DN: 6 in - 8 in
Pressure: 300, 750 psi
Temperature: -46 °C - 240 °C

... 5211 NACE MR0175 / ISO 15156 materials (optional) End connection standards: RF Flange – ASME B16.5 Raised Face Face to face standards: ASME B16.10 for flanged Pressure testing standards: EN 12266-1 | ISO ...

DN: 50 mm - 600 mm
Pressure: 10, 16, 25, 40 bar
Temperature: -30 °C - 650 °C

... higher pressure applications.   V110 Series valves can be supplied with hand levers and gear boxes as manual valves and with pneumatic, electric or hydraulic actuators. Proval V110 Series valves are ...

DN: 0.25 in - 8 in
Pressure: 150 psi - 4,500 psi
Temperature: -254 °C - 1,038 °C

... The HI-100® Control Valve features an in-line Straight-thru, venturi flow design. The control element, a spherical ball, is contained by a cage that positions the ball relative to the downstream seat by means of linear stem travel. There ...

DN: 0.75, 1, 0.5 in

... Brass ball valve Lever of aluminium Brass full-bore ball valve, 1⁄4” drain valve and extra 1⁄4” connection for pressure gauge. Aluminium lever. Brass ball valve, with full bore. ...

DN: 25 mm - 65 mm

... Concentrate Ball Valves come in standard sizes ranging from 1.0 to 2.5 in (DN25-DN65) to match the concentrate inlet thread (or flange) size on Winan proportioners and Inline Balanced Pressure Proportioner(ILBP) assemblies. ...

DN: 80 mm - 900 mm
Flow rate: 0 l/s - 2,132 l/s

... 106 / 206-PR-SM is a pressure reducing control valve with an integral back-up which is the 81-RP pilot wherein it protects the device against diaphragm or pilot failure and reduces unnecessary maintenance. This product is made of ASTM ...

DN: 50 mm - 500 mm
Pressure: 250 psi
Temperature: -29 °C - 204 °C

... resilient seated butterfly valve is a Double Flanged design which can be used for dead-end service. A major design advantage of Bray valve product lines is international compatibility. The same valve ...

DN: 25 mm
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 180 °C

... DN15 - DN50: Flange dimensions and threaded holes according to PN 40. DN65 - DN200: Flange dimensions and threaded holes according to PN 16. Flanges PN16- DN65 will be delivered in 4-hole execution! PRESSURE ...