... Rotalog Paddle Switch is second to none. Thousands are in operation giving this unit a reputation for being reliable, durable and effective. Three main models are available, in a range of voltage and paddle options ...
Process temperature: 0 °C - 110 °C
Vertical mounting for water, fuel and oil • Type LM70 • 1 to 4 contacts (1 common for 4 contacts), • Power maxi : 10 W • Current maxi. : 0,5 A • Voltage maxi : 200 Vcc • Waterproof connector for 1 or 2 contacts, cable output for ...
Process temperature: -45 °C - 85 °C
The Tank Level Gauge - RTS operates based on the conductance of the measured liquids. The electrodes are placed at each quarter length of the probe. The LED indicator (ultra-bright LED) signals the level ...
Level indicators are used for measuring material level in silo and hoppers. Paddle type level indicators are supplied as 24AC, 230VAC, 24VDC. Also optional shafts up to 1000mm length ...
Level sensor switch is also known as water level switch. Use changes of magnetic system within the float with the liquid level to trigger the reed ...
Foshan Chuandong Magnetic Electronic Co., Ltd.
Process temperature: -40 °F - 300 °F
Process pressure: 300 psi
Single Level Refrigerant Recovery Switch Yuanben Company's P/N：LS-726 and LS-988 are 80% shut-off switches for all standard 30 and 50 pound D.O.T. approved recovery tanks. P/N: LS-988 ...
Shanghai Yuanben Magnetoelectric Technology
Parts in contact with the product resistant to hydrocarbons and stainless steel rod; The mounting position is top of the tank with gas fitting 1'' and O-rings; Air connections with push-in fittings for pipe ø 8mm or on request ø 10 ...
Process temperature: -40 °C - 85 °C
The level sensor LS20 is developed for liquid level measurement/switching using a float magnet. The level switch LS0 can be used for any tank process connection type ...
Process temperature: -40 °C - 150 °C
Process pressure: -1 bar - 40 bar
Vibrocont SHM-300 is a point level switch for liquids. The Vibrocont SHM-300 is especially designed for food & beverage applications where hygienic requirements are requested. The Vibrocont SHM-300 is ...
ACS Control-System GmbH
Process temperature: -60 °C - 220 °C
... Ultrasonic Non-contact Level Switch is a redundant vibration level switch operates with “frequency ultrasonic” technology. With measurement attaches on outer wall of ...
Xi'an Dinghua Electronic Technology Co., Ltd
Process temperature: -130 °C - 560 °C
Side mounted level switch , float operated with swicth mechanism. Designed for nuclear, thermal power plants, petrochemical and critical applications. Qualified for severe operating conditions: They ...
TCEM
Process temperature: -20 °C - 100 °C
Process pressure: 10 bar
Features level switch for liquids 7 basic settings for different substances additional settings via PC and programming adapter (optional) weld-in sleeve system with modular process connectors and pressure ...
Seli GmbH Automatisierungstechnik
Process pressure: 0 bar - 100 bar
EMCO level switch type 210FN03 •Top mounted •Standard flange (bolt holes Ø 13 mm and BCD Ø 92 mm) •Wetted parts in stainless steel AISI 316 •Housing in stainless steel •Max. rod length 3 meters •Cost ...
Process temperature: -20 °C - 70 °C
... non-intrusive level switch can output relay signals to the later stage electrical appliances or other equipment, so as to realize the monitoring or control of liquid level. Applications The ...
Level float switch for wastewater For containers of a certain size (tanks, cisterns, catch basins, pools, open wells etc.). Economical and easy to install (just pick it up inside the container). Includes 5m cable.
Toscano Linea Electronica
Rugged industrial level switches specifically designed for variety of applications High pressure and temperature application capabilities in different models Wide variety of internationally ...
Process temperature: 60 °C - 385 °C
The Electronic Level Switch, manufactured by LICO Electronics Gmbh, is built with optical and acustical alarm. This switch is ideally used for industrial and marine utilization. ...
Process temperature: -40 °F - 300 °F
Process pressure: 0 psi - 500 psi
... Mounted 316L Stainless Steel Liquid Level Switches are commonly used in potable water, hot water, various acids, and in solvents. The side mount provides added versatility, allowing the switch to be used ...
Whitman Controls Corporation
Process temperature: -40 °C - 93 °C
Process pressure: 0 bar - 82.7 bar
... function of a Liquid Level Switch is to detect and monitor liquid level in a vessel. Applications Henry Technologies’ Liquid Level Switches are designed for use ...
Process temperature: -20 °C - 80 °C
Process pressure: 0 bar - 1 bar
The KV-01 is a float level switch that is characterized by its optimized usability and basic design. It is integrated with a maximum of 3 switching points that is capable of being adjusted. A free choice ...
Engler Steuer-Mess- und Regeltechnik
The SMART level regulator is a floating switch for the management of liquid level. It allows connecting electrical appliances (usually pumps, but also solenoid valves, alarms, motordriven ...
Process temperature: -13 °F - 300 °F
Process pressure: 50, 100, 300 psi
... rising level. Normally open or normally closed switch operation is easily defined by the mounting position of the switch. When normally open the float lowers with the fluid level ...
Clark
Process temperature: -20 °C - 70 °C
Process pressure: 2, 3 bar
Float switches are used for simple limit value detection in liquids. Due to the higher density of the liquid, the float switch floats on the liquid surface. The float switch is secured ...
Pepperl+Fuchs SE
Process temperature: -50 °C - 150 °C
Process pressure: -1 bar - 64 bar
The piezoelectrically activated vibration of a vibrating fork is damped when the fork comes into contact with the medium. Using this change, an electronic system determines the switching signal. The function is independent of fluctuations ...
Pepperl+Fuchs SE
Process temperature: -40 °C - 150 °C
Process pressure: -1 bar - 40 bar
The conductivity of a liquid medium may vary widely. Once the liquid reaches the fill limit determined from the installation height of the electrode, the liquid medium closes the DC free alternating current circuit between the two electrodes ...
Pepperl+Fuchs SE
Process temperature: -10 °C - 60 °C
Process pressure: 1,013 bar
The lubricant level switches allows the operator to read the lubricant level. It is a visual indicator in the form of an oil gauge glass that is installed in most reservoirs. The float switches ...
Please specify:
Help us improve:
remaining