- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Stainless steel level switch >
- WIKA
WIKA stainless steel level switches
Process temperature: 0 °C - 150 °C
Process pressure: 0 bar - 10 bar
... also possible to detect non-conductive media. The level switch is particularly suitable for use with foaming media because the foam itself is not detected. The output of the level switch ...
KOBOLD Messring GmbH
Process temperature: -25 °C - 60 °C
... biofuel/biodiesel • Yellow fitting with ATEX (EC Type Examination Certificate, zone 0) • Variable height adjustment • Suitable for use in flood hazard areas • Yellow fitting with high-grade stainless ...
Process temperature: 0 °C - 80 °C
... from Galvatek is a float switch with a simple and easy for use design specifically manufactured for liquid operations without covering. This device offer a smooth and cost-effective solution to control and check the liquid ...
Process temperature: -40 °C - 150 °C
Process pressure: 0 bar - 15 bar
... Material: VA: stem, mounting element and float: Stainless Steel 1.4571 MS: stem, mounting element: brass / float: NBR foamed up to 5 switchpoints Rugged and sturdy design Application: General ...
Process temperature: 0 °C - 200 °C
Process pressure: 0 bar - 20.68 bar
... liquid level switch has a stainless steel stem and a stainless steel float. Stainless steel stems ...
Madison Company
Process temperature: -40 °C - 160 °C
Compact stainless steel single level vertical mount LS02 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch ...
Process temperature: 200 °C
Process pressure: 0 bar - 12 bar
Versatile stainless steel LS05 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring capable of high temperature resistance ...
Process temperature: -40 °C - 100 °C
Process pressure: 7 bar - 25 bar
... Polarity, Over Voltage Protection • 1mm liquid level detecting precision • Low Power: 10mA with output low • Temperature range: -20~55℃ or - 40°C~100°C • Stainless steel + glass ...
Process temperature: -20 °C - 200 °C
Process pressure: 0 Pa - 2,500,000 Pa
... installed. FDM Mini Float Level Switch, Lquid Level Switch (Food Grade) FC/FD series is a magnetic float level switch type of product ...
Mütec Instruments GmbH
Process temperature: -40 °C - 80 °C
Process pressure: 0 bar - 10 bar
SCX1 Vibrating Probe Level Switch, Solid Level Switch, Bulk solids handling (Food Grade) The Finetek vibrating probe switch is highly versatile and ...
Mütec Instruments GmbH
Process temperature: -20 °C - 200 °C
Process pressure: 0 bar - 35 bar
The FC/FD series is a magnetic float level switch product line based upon two principles, buoyancy and magnetism. The floats of the FC/FD magnetic float level switch ...
Mütec Instruments GmbH
Process temperature: -40 °C - 220 °C
According to the Doppler effect, the frequency of waves encountering moving objects changes. The Doppler detector is installed on the pipeline, and the detector emits electromagnetic waves. When there is material flow in the pipeline, ...
Process temperature: -20 °C - 150 °C
Process pressure: 10 bar
... magnetic reed switch contacts or a reed switch chain transmitter. One or more floats, free to slide along the guide tube, magnetically act on the contacts positioned at the intervention points, switching ...
Riels Instruments
Process temperature: -40 °C - 135 °C
Process pressure: -1 bar - 100 bar
... the event of a fluctuating level, for example when filling the tank. Compensation for foam, bubbles and condensation as well as for sticky fluids can be set in the Flex Programmer software. The CONTACT-RLBFI level ...
Riels Instruments
Process temperature: -20 °C - 120 °C
Process pressure: 10 bar
The RIL210 float level switch can be used for dirty liquids, water, petroleum, refrigerant oils. It tolerates the presence of metal particles, including ferrous ones, since the float ...
Riels Instruments
Process temperature: -10 °C - 120 °C
Process pressure: 0 bar - 20 bar
Bilge Level Switch Body entirely AISI 316 L stainless steel Maximum operating pressure 20 BAR Maximum operating temperature -10 / + 120 ° C Average specific weight> ...
ASIT ITALIA
Process temperature: -20 °C - 80 °C
Process pressure: 10 bar
The level switch is suitable for fluids in general, particularly used in the naval, chemical and aqueduct sectors. Our model AI.LSoem, is composed of a float totally in AISI 316 of di- dimensions 30x36mm, ...
ASIT ITALIA
Process temperature: -20 °C - 80 °C
Process pressure: 10 bar
The level switch is suitable for fluids in general, particularly used in the naval, chemical and aqueduct sectors. Our model AI.LSOEM.W, is composed of a float totally in AISI 316 of dimensions 30x36mm, ...
ASIT ITALIA
Process temperature: -10 °C - 128 °C
The VFS30 is a reversible float switch manufactured by Comus. It features a stainless steel SUS304 construction, and dimensions of 60.0x28.0mm. The switch has a voltage ...
The Comus Group
Process temperature: -10 °C - 120 °C
The VFS75 is a stainless steel float level manufactured by Comus. This device is made of SUS303 stainless steel and features a contact form which is ...
The Comus Group
Process temperature: -10 °C - 125 °C
... leave residue. The OPT-A2 model is an electro-optic level switch, manufactured by The Comus Group. This product has a maximum 100 mA load current with 10-28 Volts DC power supply. The switch ...
The Comus Group
Process temperature: -40 °C - 400 °C
Process pressure: -1 bar - 100 bar
GCAS level switch is a capacitive level sensor used for level control in conductive liquids, low conductivity liquids, powdery materials with solid particles, sticky ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Process temperature: 0 °C - 125 °C
... the reed sensor. These changes of reed sensors, alarm or level information can be evaluated with a relay circuit or control device. It is preferred by users because the relay output ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Process temperature: 20 °C
Process pressure: 1 bar - 5 bar
WIRED LEVEL SWITCH - STAINLESS STEEL 5 Bars 1 20°C 115*110mm Diameter NO/NK 45° Differential Angle
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Process temperature: -50 °C - 250 °C
Process pressure: 16 bar
● First made-in-China Vibrating Rod Level Switch that is designed with double vibration rods. ● High sensitivity thanks to the fine adjustment on the resonant vibration frequency; suitable for virtually ...
China Shenzhen Jiwei Automations Ltd.
Process temperature: -40 °C - 250 °C
... Admittance Level Switch can detect capacitance as well as impedance between probe and vessel. It is flexible for various applications while consistently demonstrating immunity to buildup, especially for ...
China Shenzhen Jiwei Automations Ltd.
Process temperature: -50 °C - 250 °C
Process pressure: 0 bar - 25 bar
... Particularly suits for level measurement of powdery, fine-grained bulk solids, can effectively avoid buildup. ● With the suspension cable, Fork-11 can be applied in tall and narrow silo. ● Industry-leading performance ...
China Shenzhen Jiwei Automations Ltd.
Process temperature: -10 °C - 90 °C
... viscosity of the fluid: 150 cSt Mechanical life: 106 cycles at 20°C Body: in anodized aluminium with wetted part in stainless steel 316L (rod) and spancil pom (float) Installation: must be least ...
Fox S.r.l.
Process temperature: -25 °C - 80 °C
Process pressure: 0 bar - 2 bar
The 76A series from Fafnir is a thermal overfill prevention device that is especially designed to comply with the German Water Resources Act (WHG). This easy to use model combines 76A with NB 220 to prevent tank overfill and liquids that ...
Process temperature: -25 °C - 80 °C
Process pressure: 0 bar - 2 bar
The 76A series from Fafnir is a thermal overfill prevention device that is especially designed to comply with the German Water Resources Act (WHG). This easy to use model combines 76 with NB 220 to prevent tank overfill and liquids that ...
Process temperature: -20 °C - 150 °C
Magnetic float level controls for liquids are made of a reed contact placed inside the shaft and an operating magnet placed in the float which runs due to the increase or decrease of the liquid to detect. The ...
Process temperature: -40 °C - 150 °C
Process pressure: 16 bar
The vibration level controls are using when it is necessary to ascertain if solid powder or granular substances are at their minimum or maximum depths. They are used for level control in silos for the ...
Process temperature: -40 °C - 115 °C
... medium, even the mixture, ie: the road cleaning vehicle for collecting dry and wet garbage. The LB series level switch is made of stainless steel, and the probe is ...
EMA ELECTRONICS LTD.
Process temperature: -40 °C - 200 °C
Process pressure: 40 bar
... temperature changes. Therefore, it can meet the requirements of the most demanding applications. The LC series level switch is made of stainless steel, and the probe ...
EMA ELECTRONICS LTD.
Process temperature: -20 °C - 450 °C
... High bearing strength Small and compact design for simple mounting Stainless steel mechanical parts and robust gear motor ensure the lifetime No need to remove the whole set of switch ...
EMA ELECTRONICS LTD.
Process temperature: -30 °C - 60 °C
Process pressure: -0.5 bar - 10 bar
... rooftop of the angle arm. BACKGROUND Stepper motor technology has proven its worth in the space industry and long-term tests in the automotive industry since all functional parameters can be adjusted. ...
MBA Instruments GmbH
Process temperature: -30 °C - 60 °C
Process pressure: -0.5 bar - 10 bar
Thanks to the new product series semi rotating paddle MBA801 with a halfpipe, the modern level measuring devices with stepper motor technology can now be used for even more special applications in bulk materials. The ...
MBA Instruments GmbH
Process temperature: -20 °C - 300 °C
The MBA100 mechanical switch reliably measures the limit in free-flowing bulk materials such as granulates, powders or feedstuffs. By light pressure of the bulk material on the stainless steel ...
MBA Instruments GmbH
Process temperature: -30 °C - 130 °C
Process pressure: 0 bar - 50 bar
... that, for variety of materials and dimensions, offers to the user a simple and economical solution forthe control of liquid levels. The units are available with connection cable in lengths of 1.5 m and 3.0 m, other lengths ...
VAL.CO srl
Process temperature: -30 °C - 105 °C
Process pressure: 0 bar - 30 bar
Level controls with 1 electrical contact, reliable, compact and easy to install. Designed to offer a range of level switches to meet the request for a cheap monitoring of the level in ...
VAL.CO srl
Process temperature: 0 °C - 105 °C
Process pressure: 0 bar - 30 bar
Level controls with 2 electrical contacts, reliable, compact and easy to install. Designed to offer a range of level switches to meet the request for a cheap monitoring of the level in ...
VAL.CO srl
Process pressure: 2 bar - 6 bar
Our Float Switch with Pneumatic Output (Float Switch) is designed to be mounted into the top of a tank into which access is possible to secure the locknut and float. The float switch ...
Process temperature: -20 °C - 200 °C
Process pressure: 0 bar - 16 bar
Product properties - Limit switch or differential switch versions - Adjustable sensitivity - Adjustable time delay - High or low fail-safe mode - All wetted parts stainless ...
NIVELCO Process Control Co.
Process temperature: -20 °C - 135 °C
Process pressure: 8 bar - 50 bar
The operation of the COMECO’s level probe LCSFT is based on the switching of reed switches by magnetic floats, moving alongside a protective tube. Large variety of versions based on different stainless ...
Comeco Control & Measurement
Process temperature: -20 °C - 80 °C
Process pressure: 10 bar
Float switch for a secure, selective level measurement Through their design and the selection of materials, the float switches are specially developed for use in shipbuilding or in ...
Process temperature: -10 °C - 80 °C
Process pressure: 0 bar - 10 bar
Level Switches with Stop Ring Materials of constructionGSA – brass stem, NBR float GSIA – all 316 stainless steel Actuation points LM1 – 1 actuation point N.C./N.O. contact LM2 – ...
ELETTROTEC s.r.l.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining