|
|
| Products 91 to 120 of 134 |
16 digital inputs
Profibus-DP 16 digital outputs 0.5 A
8 digital outputs 2 A
8 digital inputs 8 digital outputs 2 A
|
|
|
Open, smart and seamless. Omron offers open networks such as DeviceNet and PROFIBUS-DP that allow easy integration in existing installations and ensure compatibility with third party systems. We also offer Compobus/S, Omron proprietary sensor/actuator bus, for cost efficient, fast and program-less configuration.
|
|
|
|
|
|
The TG-540 is a full featured motion and I/O module that provides velocity and position trajectory commands to digital servo and stepper drives. It offers the benefits of scalability (one axis at a time), easy distribution, flexibility to select the optimal motor and I/O technology in any combination without software ramification, and ultra-smooth double-jerk-limited move profiles.
The TG-540 sends digital trajectories instead of analog torque commands to provide superior noise immunity and allow OEMs to capitalize on modern drive technology. The TG-540 is extensible per axis, so you won't waste money on unused axes or risk running out of axes if design requirements change. Each TG-540 has a DSP on each device, so performance will not degrade as the number of axes increase. And perhaps most importantly for OEMs who desire a broad range of options, the TG-540 does not require an interface protocol. It natively interfaces to virtually any digital drive or I/O device from any manufacturer, so OEMs are not limited by the availability of components with dedicated protocols.
The TG-540 is compatible with ControlPoint - Teknic's distributed, open-architecture machine control system. ControlPoint offers OEM machine designers a wide array of control components to allow interconnectivity to nearly any digital or analog sensor, stepper, digital servo, brushless servomotor, and other machine control devices.
|
|
S800 I/O is a comprehensive, distributed and modular process I/O system that communicates with parent controllers over industry-standard field buses. Thanks to its broad connectivity it fits a wide range of process controllers from ABB and others.
By permitting installation in the field, close to sensors and actuators, S800 I/O reduces the installation cost by reducing the cost of cabling. And thanks to features such as "hot swap" of modules, "on-line" reconfiguration and redundancy options, it contributes to keeping production -- and thereby profits up.
S800 I/O features include:
- Comprehensive coverage
- Flexible configuration and installation
- Ease of set up
- Reliability and accuracy
|
|
|
|
|
|
Addi-Data presents the new 32-bit digital input/output board PC104-PLUS1500 which has 32 I/O. The PC104-PLUS1500 is equipped with both PCI and ISA connectors on the circuit board. The direct connection to SPS controls is guaranteed because the I/O channels correspond to the industrial standard +24 V for “logic 1”. The input voltage is designed precisely so that the PC104-PLUS1500 switches reliably to „0“ or „1“, even in the case of disturbances. With 0-14 V as “low” and 19-30 V as “high” the ranges are set very high. In order to ensure that the board is interference-free and thus the flawless use in applications, the 32 digital inputs/outputs are isolated up to 1000 V and protected against fast transients, electrostatic discharge and high-frequency EMI.
Two digital inputs are interruptible and thus the main programs are relieved of the standard monitoring and evaluation tasks. In order to avoid undefined states the outputs stay on “status 0” when the PC is started.
The High-Side switch outputs that are available on the PC104-PLUS1500 are designed for inductive loads and PTC resistors, in contrast to the open collector outputs. They work with a nominal voltage of 24 V and an output current of 150 mA and are protected against short-circuit, overtemperature and undervoltage. Additionally, 3 timers or counters are available, whereas Timer1 can work as programmable watchdog for resetting the outputs. A status register that can be read out allows to detect short-circuit or overtemperature.
|
|
Product Range:
AIM104-IN16 16 opto-isolated inputs
AIM104-IO32 32 TTL compatible digital I/O
AIM104-RELAY8-IN8 8 changeover relays and 8 opto-isolated inputs
AIM104-OUT16 16 opto-isolated Darlington driver outputs
AIM104-OPTO-IN8/OUT8 8 opto-isolated inputs and 8 opto-isolated outputs
AIM104-ADC16/IN8 Isolated 16 channel 12 bit ADC and 8 channel digital input
AIM104-MULTI-IO Isolated 16 channel 12-bit ADC, 2 channel 12 DAC and 8 channel digital input
AIM104-MOTION-1 8-bit PC/104 module providing single axis stepper / DC servo motor control with on-board drivers
AIM104-MULTI-IO Isolated 16 channel 12-bit ADC, 2 channel 12 DAC and 8 channel digital input
CTR-1462 Galvanically isolated DIO, 24 inputs and 24 outputs
DAQ-1278 Cardbus controller with 1 x 32-bit slot for type I, II and III card support
|
|
Micronix PC/104 boards is European manufactured expansion modules for the PC/104 bus, designed for industrial and process control systems and for automotive applications.
|
|
S100 I/O consists of one or more I/O racks with several I/O boards, connection units and cables covering a wide variety of applications and specific needs. The I/O boards are divided into groups, depending on their function. Within each group, there are several I/O boards with differing functionality and complexity.
The Advant Controller 410 includes an integral S100 I/O rack, while the Advant Controller 450 interfaces up to five S100 I/O sub-racks through a single or redundant interface module and cables. Optical modems enable remote location of S100 I/O sub-racks.
|
|
The 6mm-wide WAGO isolation amplifiers and transducers share a common profile and can be easily commoned rather than requiring complex discrete wiring. The plug-in relays can easily be changed from above the unit.
The 857 Series includes preset and configurable isolation amplifiers, passive isolators, repeater power supplies (also for HART applications), signal splitters and temperature transducers for both PT 100 sensors and thermocouples.
Meeting some of the highest quality requirements: The extended temperature range of –25°C to +70°C permits a wide range of application areas. All devices provide safe isolation of input, output and supply circuits with 2.5kV test voltage to EN 61140. Signal transmission accuracy for measured data is less than 0.1%.
|
|
ARF20 / ARF30 - Logical and analogical status transfer 433/434MHz or 869MHz – 10 & 500mW LICENCE-FREE
* Monodirectional transmission of 8 logical status or 4 analogical values up to 4km
* 8 TOR inputs toward 8 "open collector" outputs or 4 relays
* 4 channels/8 bits – voltages 0/5V or currents 0/20mA
* Complies with the European standard RTTE EN300-220 / EN301-489
* IP65 box ready for use
* Industrial applications, long range transmissions and/or in disturbed environments
(in-town network, agriculture, difficult environments, building interconnection…)
o Information transfer
o Wireless remote control
o Alarm and security system triggering
o Level control…
|
|
Zlinx Wireless I/O, point-to-point/multi-point
How to select the right wireless system for your Modbus point-to-point/multi-point applications
Simplify your installation by sending your digital and analog inputs and outputs over the air. Why run a wire when you can install a Zlinx wireless module to replace it? The new Zlinx wireless product line provides point-to-point or multi-point communication, replacing your wires.
With bi-directional flow control, the controllers allow full-duplex transmissions to optimize the communiation efficiency. Modbus Mode - Up to 150 base modules in a system. Up to 6 systems can run simultaneously by using difference RF network I/O.
Connects directly to analog, digital and temperature inputs and outputs
Point to point/multi-point wire replecement
Expandable, modular design
Modbus compatible
|
|
|
|
|
|
Wireless Remote I/O - Cable Replacement
Banner introduced a new product line called SureCross Wireless I/O.
The DX70 is point to point architecture based on a pair of emitter/receiver. Digital or analogue I/Os are directly linked based on the internal terminal chamber identification. Unlimited pairs can work together in the same area without any interference.
The DX80 is a point to multipoint with up to 56 Nodes linked to one Gateway. The possible high number of I/Os can be transferred to supervision by communication with Modbus RTU (RS485), EtherNet/IP or Modbus TCP. Some Nodes can be powered by 24 Vdc, battery box or solar panel with rechargeable battery. Special DX99 Nodes come with ATEX certification Zone 0 for gas.
The DataRadio DX80DR2M is used mainly for serial (RS232 or RS485) cable replacement. This can be configured with one master and numerous slaves.
SureCross products fit with many different types of Industries (Factory and Process Automation, Water Treatment...). The high performance, reliability and low cost of this product makes it a natural solution for renovation/revamping of existing installations.
Main features include:
Rugged industrial housing giving an IP67 rating
Reliable and secure data communication with FHSS
Accept up to 12 different analogue or digital signals on one module
Up to 56 Nodes per Gateway with extended address mode
Line of sight maximum distance of 3 Km between Node and Gateway
Built-in signal strength visualisation
Link loss output indicates communication status
Specific FlexSensors adapted for a longer lifetime when using a battery
Frequency band of 2,4 GHz and 900 MHz depending on country
|
|
|
TO-PASS, a complete telecontrol solution offered by WAGO consisting of stand-alone fault detectors with GSM connection, optional IP66 protection and a telecontrol PLC that can be linked to the WAGO-I/O-SYSTEM. This enables widely branched systems to be acquired in the same manner as remote stations. A GPS version is even available for locating vehicles using satellite signals. An Internet server with MySQL database rounds out the system features.
|
|
|
SATELLINK products makes constructing your wireless communication applications easier than ever. The first product in the SATELLINK line, SATEL I-LINK 100, is designed for transparent transfer of contact information or analogue signals from one location to another together with the SATELLINE radio modems.
|
|
|
Wireless I/Os are the solution for applications where cables are not suitable to be used, such as cranes, AGVs and robots. In those cases wireless I/Os are used to transfer status and control information.
|
|
Wireless-based high-precision, 8-channel temperature measurement module;
requires WLS-IFC wireless gateway device
- 8 temperature input channels
- Supports thermocouples, RTDs, thermistors, and semiconductor temperature devices
- Superior performance - accuracy exceeds sensor output
- 8 digital I/O bits; user-configurable for alarming
- 802.15.4 wireless protocol
- Range: Up to 150 feet indoors, 2400 feet outdoors
- Included Software: TracerDAQ™, Universal Library, Universal Library for LabVIEW, and InstaCal
- Lifetime Warranty & Harsh Environment Warranty® included
|
|
The Radio Printer is part of a wireless system for temperature monitoring and control. It is made up by one or more temperature sensor-transmitters, like the TempStick Radio, and a radio receiver, the Radio Printer itself. It has everything it needs to work and doesn't require any PC or software : the display allows to configure the acquisitions and the printer to store easily and quickly all the stored data.
- no need of a PC nor software;
- graphic and alphanumerical LCD display;
- LED and sound alarms for thresholds set by the operator;
- display values for each sensor and all data recorded;
- rechargeable batteries and external power supply.
Applications:
stock houses and warehouses monitoring;
fridges and fridge cells monitoring;
environment monitoring;
computer rooms control;
laboratories monitoring;
transport monitoring;
catering services;
HACCP compliance temperature monitoring;
ISO compliance temperature monitoring.
|
|
|
|
|
|
|
The TempTrackr™ Multipoint System provides a batteryless, non-invasive and low cost temperature measurement solution that is ideally suited for applications ranging from High Power Switches to Rotating Machine Components. The Starter Kit is designed to showcase the capabilities of the TempTrackr™ Multipoint System. Each Kit includes three batteryless wireless temperature sensors that are capable of reading temperatures between 0°C and 120°C. The three sensors provide the ability to monitor temperature at multiple points of interest. The Surface Acoustic Wave (SAW) resonator within each sensor is powered by bursts of electromagnetic radiation emitted by a wireless reader (also known as a wireless interrogation unit). A feedback signal, conditioned by the temperature to which the resonator is exposed, is then electromagnetically transmitted to the wireless reader where it is processed for temperature measurement. The TempTrackr™ Multipoint System is capable of tracking up to six sensors and can provide temperature data via the CAN communication protocol. The number of sensors can be extended to 12 by making use of multiple interrogation antennae. The Starter Kit is an ideal technology evaluation tool3. SenGenuity will work closely with you to adapt the TempTrackr™ Multipoint System to meet the specific needs and requirements of your application.
|
|
| ... products without technical information |
| |
|
|
I/O modules
