|
|
| Products 121 to 150 of 295 |
The new SI 3000 range of Controllers are specifically designed to operate with Solartron's extensive range measurement transducers, and/or third party transducers, such as pressure and temperature.
One of the main features is an intuitive menu-driven display, which can be programmed to display readings, set Limits/Alarms, Peak Hold, Track, or act as a Data Logger for inputs from one or two transducers
The SI 7500 is a multi axis metrology display that connects to a Solartron Metrology Orbit Network and accepts up to 16 Orbit Module inputs; such as Digital Probes, Linear Encoders and Analogue Input Modules. It features intuitive displays, helpful audio cues and user defined formulas. The SI 7500
also reports dynamic Min/Max measurements, provides SPC analysis from an integrated database and offers connectivity to PC's and other peripherals.
|
|
|
The Model 1003 Transducer Indicator has been specially designed to operate with both DC and AC style LVDTs. It can also be configured to work with our Series 600 & 605 ADTs. This meter features a 5-digit display, high speed analog output, and optional RS232 & relays.
|
|
|
Position values on shafts and spindles can be simply and clearly controlled with the original SIKO counters. Extremely simple installation and retrofitting is one of the decisive advantages. The displayed value can be adapted to the required spindle pitch with an integrated gear unit.
|
|
Looking for a way to trim cost and save space? Check out Red Lion's CUB5 Panel Meters. The meters are less expensive and less than half the size of most standard 1/8 DIN panel meters. Less panel space and the ability to utilize smaller enclosures make these meters the perfect solution for any budget.
Don't let the size fool you...these meters are packed full of features! The large .48" (12 mm) display, optional single or dual set point control output modules, and optional RS232 or RS485 communication modules allow these meters to handle even the most demanding applications.
CUB5 Counter/Rate Indicator
CUB5I DC Current Meter
CUB5P Process Meter
CUB5RT RTD Meter
CUB5T Preset Timer and Cycle Counter
CUB5TC Thermocouple Meter
CUB5V DC Voltmeter
Optional cards:
- CUR5RLY (1 relay output module)
- CUR5SNK (module 2 NPN transistors - only for analog models)
- CUB5COM1 (communication RS485)
- CUB5COM2 (commnunication RS232)
|
|
|
|
|
|
High Resolution SmartSwitch and SmartDisplay are programmable modules that display graphics for alphanumeric characters, animated sequences, with a 64 color capability arrangement.
An integrated liquid crystal display provides wide viewing angle with high contrast and clarity. The modules are Epoxy Sealed with Straight PC Terminals to prevent entry of solder flux and other contaminants. Standoffs are utilized to allow for easy, secure mounting and alignment. The High Resolution SmartSwitch has a life of 1,000,000 actuations.
Key FeaturesHigh
- resolution of 64 x 32 pixels (Horizontal x Vertical)
- 64 colors of backlighting
- Operated by commands and data supplied via SPI communications protocol
- Can display as many as four lines of text with ten characters
- Viewing Area:
* High Resolution SmartSwitch:
15.0 x 10.8mm (Horizontal x Vertical)
* High Resolution SmartDisplay:
13.9 x 10.6mm (Horizontal x Vertical)
- Incorporates bitmap display function
- General brightness of backlight is variable in eight steps from dark to bright
|
|
Densitron has the widest, most comprehensive choice of formats to fit your mechanical and optical requirements.
More than 25 different formats - 16x96 to 640x480 pixels - Standard backlight options of low-power electroluminescent, high-brightness EcoBrightTM non-powered backlight by special order, LED or CFL backlights, low profile edge light options for thinner displays.
Standard or wide-temperature (-20°C to 70°C) operation is available on most parts.
With more than 40,000 different combinations, and background colours of black, white, yellow, green and blue in our range, we have the display for your application. If we havent, we can always fully or semi custom them for you!
|
|
|
|
|
|
The digital indicator DI25 is a competitively-priced, multifunction instrument for a wide variety of measuring tasks.
The multi-function input has 18 different input configurations, which can be selected via the rear connections and also by selection the appropriate input signal with in the instrument configuration. In this way it is possible to connect transmitters with current or voltage signals, and both resistance thermometers or thermocouples to the same instrument.
The measured value can be retransmitted for further processing via an analogue 4 ... 20 mA output (standard) or via an RS-485 Serial Interface (optional).
Other analogue retransmission signals are also available as option.
The basic version of the DI25 indicator features three alarm outputs. Instruments with the optional 24 V transmitter power supply have two alarm outputs available.
With the high ingress protection of the fascia (IP66) the digital indicator DI25 can also be used under extreme operating conditions.
All configuration and programming can be done using the front control keys.
|
|
LEDI POOL DISPLAYS
Time + temperature zone display for swimming pool
The LEDI®POOL displays the temperature of the water for one or two baths and gives alternatively the time/air temperature information.
The LEDI®POOL can be installed in main entrance or in the swimming zone.
Complies to EMC Directive 98/366 EEC including directive 93/68. EN 55024, EN 55022, EN 60950
|
|
What is OLED?
Organic Light-Emitting Diode (OLED) Display Panel, or Organic Electroluminescence (OEL), possesses the new generation technologies that other flat displays are hard to accomplish –brighter and clearer full color images with more agile responding speed.
The advantages of using OLED
Wide Range of Visibility:
Good visibility from long distance & wide viewing angle
Small Size:
Thickness down to 1,8 mm possible & dot pitch size smaller than for any other
Image Quality:
High colour saturation, high contrast & high speed
Low Power Consumption:
Efficient transformation of electricity into light and low heat output
Operation at low temperatures:
Operates effectively under very low temperatures
Replacement OLEDs
We are now expanding our OLED range to include drop-in replacements for products recently discontinued by other manufacturers.
|
|
OSD020AMQCIF-C:
- Diagonal Size: 2.0 inch
- Resolution: 176 x RGB x 220
- Overall Dimensions: 37.3 x 50.25 x 1.6 mm
- Color(s): 262k
- Interface: Selectable MPU 18/16/9/8-bit
|
|
For the display of process data, Fuji electric offers a complete line of digital panel meters for all application.
A lot of functions or options (72x36mm or 48x96mm formats - current, voltage, thermocouple, RTD, frequency or pulses - Alarm and re-transmission output...) are available and allow to adapt to all applications.
|
|
OSD has been manufacturing and marketing Large Molecule passive matrix OLED products since 2003. These popular products have been designed into communication systems, industrial control systems and many types of consumer electronics. So, it is with great regret that OSD has announced it is withdrawing its entire PLED module line from the marketplace.
Recently several of the world's largest PLED panel manufacturers have announced their withdrawal from PLED production because of financial reasons. The withdrawal of these suppliers will have a direct effect on the availability of critical components that sustain OSD's PLED module production.
|
|
Product GK473 Gateway
Technical data - electrical ratings
Current consumption 10 years (flash / EEPROM)
Display 4 LED´s as operating status indicators
Emitted interference DIN EN 61000-6-4
Interface to SPA EIA RS485 (ASCII protocol)
Interfaces CANopen
DeviceNet
Profibus-DPV0
Interference immunity DIN EN 61000-6-2
LED operating status DP (green) fieldbus operating status
DP (red) operating and error status
RX / TX (yellow) receiving / transmitting a token (RS485)
Programmable parameters Auto-Check functions
Auto Scan SPA
Auto Message SPA Position
Auto Message SPA Error
Supply voltage range 12...24 VDC
Other products available:
|
|
Position display units serve to visualize the values measured with linear encoders, length gauges, rotary encoders or angle encoders. Areas of application include:
- Measuring and inspection equipment
- Dividing apparatuses
- Monitoring of measuring equipment
- Manual machine tools
- Measuring machines
Position displays from HEIDENHAIN are designed to be highly user-friendly. Typical characteristics are:
- Highly readable, alphanumeric display
- Simple, logically arranged keypad
- Ergonomically designed push-button keys
- Splash-protected front panel
- Sturdy die-cast housing
Most position display units feature a data interface for further processing in the higher-level electronics or simply to print out the measured values.
|
|
200s readout systems
As the industry standard in digital readout systems, the Acu-Rite 200S offers state-of-the-art features for milling, turning and grinding applications.
# 2 or 3 axes 5.7” Transmissive LCD display
# Job Clock
# Feed Rate Display
# Multiple Language Support
# Absolute/Incremental
# Near-Zero Warning
# Help Function
# 16 Tool Offsets/Diameter
# Preset and zero reset
# 4 Function Calculator/Trig Calculator
# Instant Inch/mm conversion
# Position-TracTM
|
|
|
|
|
|
The newest generation of digital readout systems, the ACU-RITE 200S, features exclusive crystal clear LCD display technology. This technology replaces the traditional LED and VFD displays still used by other manufacturers. The 200S features a 5.7", 320x240 resolution transmissive LCD display, the latest in flat screen technology.
The 200S milling LCD readout system is now totally intuitive as all prompts, instructions and help functions are now visible as text or graphics on the screen. In addition, all standard routines are now visible on the screen with graphics to guide the user through simple questions. It is no longer necessary to constantly refer to a manual or memorize codes, to access the functionality of the 200S system.
Available in the same LCD readout as a 2- or 3-axes display, the 200S for milling comes complete with bolthole pattern calculations for full and partial circles with graphics, zero reset and preset features, tool diameter compensation, near zero warning, and every other operating feature available in ACU-RITE's previous DRO product lines.
The 200S provides the NEW STANDARD of productivity for manual milling applications!
|
|
FAGOR Innova series DRO's represent a technological breakthrough in measuring and control systems for machine tools offering high quality and features at very competitive prices.
With tailored solutions
Innova series DRO's offer a great deal of standard features, some of which only FAGOR can offer and they adapt to the specific requirements of each application in order to obtain greater productivity from milling machines, boring mills, lathes, grinders and other applications.
FAGOR's new "TrueVision"
Following the feature looks of the Innova series, FAGOR presents their new 40 i DRO with an exclusive color TFT screen that displays programming assistance and solid graphics making it a lot easier to work on the various machines that may be equipped with it.
Its great viewing angle from any point of view makes this "TrueVision" the best on the market.
|
|
ACU RITE RADIAL makes its radial drill still faster!
ACU RITE radial
Those, high performance position display for radial and high-speed radial drills, which can be served easily.
The collection of the machine motion is made by means of a ACU RITE length measuring system at the arm and - usually - by a friction wheel system at the column. With the help of a further measuring system at the guide also the drilling depth can be measured and indicated.
|
|
|
As the market leader in precision measuring devices, Acu-Rite products have consistently set the standard of innovation for nearly 50 years. Proudly designed and manufactured in the USA, Acu-Rite products retain a tradition of superior quality and are preferred by machine tool builders worldwide.
|
|
Accept any voltage or current process signal.
Size 96x48x60 mm.
Display: -9999/9999 (4 digits)
Excitation output to feed the transducer @24V
|
|
Endress+Hauser is one of the pioneers in fieldbus technology and plays a leading part in the implementation of HART®, PROFIBUS and FOUNDATION™ Fieldbus technology worldwide.
Apart from field instruments, we offer network components, registration technology, automation and visualization platforms in hardware and software as well as systems for asset management of components and
plants in known Endress+Hauser quality.
|
|
Digital Process Indicators - DPI 270/280 Series
The versatile DPI 270 (miniature) and DPI 280 (general) series of digital process indicators are smart instruments for use with a wide range of process sensors and signal inputs.
When used with the Druck range of pressure transducers or transmitters, a direct reading in pressure is provided. The DPI 284/5 internal pressure sensor can be supplied up to 60 bar or external pressure sensor up to 700 bar . Direct input of thermocouples and PT 100 resistance thermometers is available for temperature monitoring.
Features & Benefits:
High accuracy ±0.01% F.S.
Wide range of process measurements
Extensive range of programmable features
Built-in sensor energisation
RS 232/485 and analogue interfaces
IP65 sealed front panel
|
|
|
Configurable indicators for temperature, pressure, force, current and AC voltage, position, normalized inputs
|
|
Process indicator for :
- analogue signals (GSI40)
- temperature signals (GSI41)
- process signals (GSI48)
Panel mounting solution
|
|
|
|
|
|
FEATURES :
* Microcontroller based design.
* Single Universal Input (8 user selectable).
* Two fixed type of inputs.
* Built in square root extractor for 4-20mA (optional)
* Two relay outputs for High, Low or Deviation per input.
* 4-20mA retransmission output linearized and proportional to PV.
* PID control output per input (optioanl)
* Bright red LED display for PV and SV.
* 51 LED bar graph display for PV or SV Or Both
* Built in 24VDC loop supply.
* IP 20 metal enclosure (144 x 72 x 120)mm
* RS 485 modbus serial interface (Optional).
Product Description:
Libratherm offers Micro controller based single or two input Bar Graph Process Indicator model BGI-144-S and BGI-144-D with both Digital and Bar graph display. In addition, the instrument provides single or dual analogue retransmission output of 4-20mA and built in 24VDC loop supply to power external loop transmitter. The process value is converted into equivalent percentage value and is displayed on the bar graph using 51 red LEDs. Serial communication on RS485 2 wire with MODBUS RTU protocol is also available with programmable modbus ID in slave mode. BGI-144 is available in 144 x 72 x 120mm panel mounting enclosure with ABS bazel, polycarbonate graphics and metal enclosure. BGI-144 works on 90 to 250VAC supply.
|
|
XC-Boards®
Information systems for production and employee information
Information systems for production and employee information present production data, reduced to the basic essentials, directly at the place of production. Being legible over far distances, they provide the employees with a quick overview of the situation and motivate them to commit themselves personally to accomplish a set goal - motivation begins with information.
|
|
LEDICOM range: Electronic message displays
Works under a Web browser, no need of software installation. The display has it own IP address.
The LEDICOM series declines in 3 models:
- Model 4LTE : 4 lines of text + LCD 12” screen displays pictures and digital video transmission Loudspeaker included
- Model 4LTH : 4 lines of text + LEDI 4/60 clock blue & yellow LED lamps.
- Model 8LT : 8 lines of text
Text in VFGD technology, blue colour
Electronic message display to be directly put on a support, to be embeded or to be put on its (optional) stele. The case consists of a cube in elm and an aluminum box. Securit glass front.
|
|
|
|
|
|
In the age of plc's and fuzzy logic there are still many processes in industrial applications where sequence and state have to be monitored and/or displayed by pulse evaluation systems. The use of the ecomat 200 control monitor ranges from simple standstill monitoring of a conveyor belt over the monitoring of the maximum rotational speed in wind power stations or slip monitoring on couplings to direction monitoring of gears and transport systems.
The units are reliable and easy to handle. Independent from the plc they indicate faulty operation and plant states and help to cut down on downtime and production loss.Basis for the evaluation is the conversion of mechanical movement into digital electrical signals (pulses). This is preferably done by means of non-contact sensors or encoders.
The frequency of a pulse sequence (the time distance between two consecutive positive pulse edges) is proportional to the mechanical movement so that this movement can be measured by a suitable control monitor with regard to a set behaviour. Furthermore the pulse trains can be converted into analog signals by means of frequency-to-current converters, e.g. for triggering measuring devices.
|
|
Bright LED display with 15 mm size
Master- and Slave operation with Baud rates up to 1 MHz
Easy to set up by two front keys and menu dialogue
Programmable scaling of display and free zero definition
Programmable bit blanking, round-loop mode and more
Aux. 24 V output for encoder supply
Standard housing 96x48x150 mm
115/230 VAC or 17-30 VDC power supply in one unit
|
|
1/8 DIN Standard
The K3MA series consists of a process indicator, a frequency/rate indicator and a temperature indicator. All models are equipped with a highly visible LCD display with 2-colour (red and green) LEDs, have a 96 x 48mm front housing and the same short depth of 80mm.
|
|
|
|