Indicators

... Features of the DTI-1000 Digital Temperature Indicator: • Unmatched Accuracy and Stability: The DTI-1000 boasts a one-year accuracy of ±0.004°C, making it one of the most precise digital temperature indicators available. ...

Specially designed to work with Solartron Transducers, the SI3100 provides the user with 1-2 channel solutions for small systems. The readout has an intuitive menu systems for ease of set up and can be programmed to display readings, alarms, limits and ...

... The DSP-10 Genset Multi-Function Display Module is an universal compact integrated digital displayer. It can be installed solely or joint with GCU-10. Features First and only Multi-function display module specially designed for generator set ...

RA-20 is a remote annunciator module for GCU-20 or other genset controller. With universal LED graphic interface, RA-20 can display generator status and failures. Its main function is to simplify all wiring with pluggable terminal block. RA-20 works up ...

... The ID series is a range of digital load indicator from i-Lift that has a mechanical measuring instrument with electronic display. The series can be used as a traditional crane scale to measure forces but can also function with shackles ...

... The DT4200 Process indicators enable linear process variables to be displayed in engineering units on the control panel. The unit is loop-powered from 4-20 mA signals, dropping less than 2 V at 20 mA. Two isolated outputs are available ...

... DT9000 N Process Indicators enable linear process variables to be displayed in engineering units. Two isolated outputs are available with different operating modes for limit signaling or for simple control purposes. Both indicators ...

... The DT9002 Intrinsically Safe Process Indicators enable linear process variables to be displayed in engineering units in even the most hazardous plant areas (zone 1, zone 2). Two isolated outputs are available with different operating ...

... ITI 16 are programmable digital panel meters dedicated to process voltage and current measurements. Panel meter size: 96 mm x 48 mm IP65 protected Two-color display for color change on alarm or pre-alarm ...

... ITI 17 is a programmable digital panel meter 96 x 48 mm for process and temperature by resistive probes and thermocouple measurements. The software enables additional linearization to be set up for thermocouples type B, C, E, L, Mo, N, ...

... TNE2 is a 2,000 monofunction digital panel meter 72 x 24 mm for temperature measurements. It can be used together with temperature sensors. Temperature is displayed in °C. Those industrial instruments are automatically delivered with ...

... Overview
BlueDial integrates a Mitutoyo digimatic dial indicator with Bluetooth Low Energy (BLE) transmission to enable wireless viewing and recording of measurement readings on smart devices and Windows PCs. It preserves ...

... Overview
BlueDial-LT is a dial indicator with an integrated Bluetooth Low Energy transmitter on the back. It pairs a mechanical dial indicator with BLE data transmission so readings are collected wirelessly ...

... Panel-mounting installation Replacement of many traditional analog measuring instruments with one DC power meter DCEM-96S DC Panel Meter is purpose-engineered to deliver high-precision data to special DC metering applications to match ...

... BPM3-96PQ Active & Reactive Power Meter is a Combination Type of digital power meter. BPM3-96PQ digital panel meter can display active power & reactive power on one screen, which is a precise device for measuring power data of the energy ...

... circuits. This digital panel meter is a Voltage and Current Combine Meter. It can replace other analogical panel meters reducing installation manpower and optimizing the use of spaces in the panel. BPM3-96UI Digital ...

... multichannel meter with graphic LCD display up to 8 inputs 0/4-20 mA, 0/1-5 V, 0/2-10 V 2 electronic relay outputs (optoMOS) power supply output: 24V DC / 200 mA programmable measuring range and indication filtration white ...

... temperature meter in a small case two-coloured display (4-digits, IP 40) input: thermoresistance or thermocouple 0, 1 or 2 REL / OC outputs RS-485 / Modbus RTU automatic recognition of 3 and 4-conductor connection (RTD inputs) ...

... with remote controller or free configuration software S-Config The low-cost SWE-73-A is a small, simple digital panel indicator, equipped with two measurement inputs: one current input (0-20/4-20mA) and one voltage input (0-5/1-5/0-10/2-10V). ...

... Analogic and digital indicators From analogic to digital indicators, we offer a complete range. Whether for new or existing electrical panels, several dimensions and electrical values are available for AC or DC ...

... Velmex VRO™ Delivers Ultra-Precise Position Readouts The Velmex VRO Digital Readout delivers precise position information generate by linear or rotary incremental encoders. This compact, microprocessor uses the latest OLED display and DSP micro-controller ...

... Velmex VRO™ Delivers Ultra-Precise Position Readouts The Velmex VRO Digital Readout delivers precise position information generate by linear or rotary incremental encoders. This compact, microprocessor uses the latest OLED display and DSP micro-controller ...

... Velmex VRO™ Delivers Ultra-Precise Position Readouts The Velmex VRO Digital Readout delivers precise position information generate by linear or rotary incremental encoders. This compact, microprocessor uses the latest OLED display and DSP micro-controller ...

... One-axis digital readout, with 6 ½ digit LCD and negative sign. Metal sensor body of small overall dimensions. Fixing of magnetic sensor by existing threaded holes M4 or by M3 through screws. Power supply either via battery or external. Flexible cable ...

... Compact-design, single-axis digital readout, equipped with the new Absolute Warning System (AWS). AWS constantly guarantees the correctness of the displayed positions and informs the operator of any malfunctioning. The user can continue machining or, ...

... Compact-design, modern and functional digital readout. Diagnostic of readout and optical scales. Resolutions up to 0.5 μm. Reading of coded references. Universal software for any kind of machine tool. Software upgrade through serial port. 1,000 ...

This item is mostly popular for the fact that it is able to display direct current, voltage and frequency information. There are versions with two relay outputs available, while the display range is four digits, with or without indication, from -9999 ...

The Display Readouts Series VD3 is used in displaying direct current, voltage and potentiometer signal. It is built with a three digit display feature through a range of -9999/9999. Series VD3 is well suited for utilization necessitating for the measurements ...

... Key-Features: - WAY-AX-S: Basic unit with 2 analog inputs (16 Bit), 3 control inputs - WAY-AX-CO: display with 4 control outputs, RS232 interface - WAY-AX-AO: display with serial RS232 interface, 16 bit analog output, 4 control outputs - WAY-AX-RL: 2 ...

... Key-Features: - HTL Inputs - WAY-DX-S: display only - WAY-DX-CO: display with 4 control outputs, RS232 interface - WAY-DX-AO: display with serial RS232 and RS485 interface, 16 bit analog output - WAY-DX-RL: 2 relay outputs - Option AC for 115...230 VAC ...

... The PHS863 is a phase sequence indicator that benefits from two functions in a single unit, including a phase sequence and open phase. The large alligator clips are another major advantage, being able to clip on switchboard terminals ...

... PHS-864A Non-contact Phase Sequence Indicator features non-contact detection, missing phase determination, and automatic shut-off function, designed for industrial detection. Equipped with a large clip and LED display, it is safe and ...

... The E490 is a versatile, loop powered multi-purpose indicator to display the actual process value, range and loop current. Besides the focus on level, temperature and pressure applications, the E490 can also work with other measuring ...

... The F490 is a versatile, loop powered, multi-purpose indicator to display the actual process value, range and loop current. Besides the focus on level, temperature and pressure applications, the F490 can also work with other measuring ...

... The F010 is a local flow rate indicator with large 26mm (1") high digits which displays the actual flow rate. The measuring and time unit to be displayed below the flow rate are simply selected through an alphanumeric configuration menu. ...

... Case diameterØ 52 mm Cover lens Glass Input Direct Illumination White HousingNylon PA66 Connection Fast-on Power consumption 100 mA max + backlighting Operating temperature -20 +70 °C Protection IP67 on the front ...

... Case diameterØ 52 mm Cover LensGlass InputDirect IlluminationWhite HousingNylon PA66 ConnectionFast-on Power supply12/24 VDC Power consumption100 mA max + backlighting Operating temperature-20 +70 °C ProtectionIP67 on the front ...

... Case diameter Ø 52 mm Cover lens Glass Illumination White HousingNylon PA66 Connection Fast-on Power supply 12/24 VDC Power consumption 100 mA max + backlighting Protection IP67 on the front ...

... ANALOGUE INPUT LARGE PANEL METERS Reference : INDI-MAXS DISP-MAX Large panel meters to be used with transducers and process signals - Strain gauge, process, voltage and current inputs - 5 digits of 38 mm height - ...

... ANALOGUE INPUT PANEL METERS Reference : INDI-PAXS DISP-PAXx Universal panel meters to be used with transducers and process signals o Strain gauge, process, voltage and current inputs o Intuitive and easy programming ...

... ANALOGUE INPUT PANEL METERS WITH DUAL LINE DISPLAY Panel meters with two display lines for Wheatstone bridge sensors or electrical analogue measurements o Dual line display 6 digits (18 mm) and 9 digits (8.9 mm) o Tricolour display o ...

The WW-30T display has a resistant input of Pt100 while the WW-30 has current inputs of 4-20 or 0-20mA and voltage inputs of 0.5, 1.5, 0.1 and 2.0V. Its power requirment is 10-30VDC or 230VAC +/-10%. Its LED characters are sized at 4 x 13mm.

... The Aplisens® PMT-920 is a digital temperature indicator that can exhibit 4...20mA or 0...20mA current input and 0...5 V, 1...5 V, 0...10 V, 2...10 V voltage input. It can deliver 2 programmable relay outputs of 1A, 230 V AC. In addition, ...

... The Digital Indicator for anemometer is designed with a mounting feature based on DIN 43650 connector standards. It manifactured with a 4-digit LED display. This digital indicator has an input that ranges from 4 to 20 ...

... The indicators of flow of CV series allow a visual inspection of the passage of liquids in hydraulic systems. The propeller is coloured for better visualization with opaque liquids. The indicator is equipped with a viewer ...

... pipe Visibility 360° The indicators of flow of FD series allow a visual inspection of the passage of liquids in hydraulic systems. The propeller is coloured for better visualization with opaque liquids. The indicator ...

... liquids, or grease-free ball bearing for air and gases ●Rotor visible from 360 ° Characteristics Mechanical flow indicator, for fluid media, with rotor for quantitative flow display. The rotor turns in proportion to the flow. ...

Calsys C-4004 is fully characterized for all major sensors (thermocouples such as B, C, D, E, J, K, N, R, S, T and RTD's like PT-100, PT-50, PT-10, PT-200, PT-500, PT-1000). The instrument can be used in industries where high accuracy temperature measurement ...