|
|
Digital Indicating Devices Type 800
mbar / bar with 2 limit values
The indicating devices type series 800.8 without setpoint and 800.7 with 2 setpoints serve for indicating values. Input signals can be signal current or voltages originating from corresponding measurement transducers or measurement value acquisition systems. The 4 character indicating devices additionally, generate a current signal of for further signal evaluations. A limit value output with two independently no-volt bistable contacts is additionally integrated.
|
|
1/8 DIN Advanced Digital
This range consists of rotary pulse, timer interval and up-/down-counting pulse indicators. These indicators with digital input feature a clear and easy-to-use colour-change display and all have an IP66 housing. K3HB series consists of rotary pulse, timer interval and up-/down-counting pulse indicators. Extra functionality can be added using option boards (max. 3): sensor power supply/output (incl. communication and linear voltage output), relay/transistor output (incl. DeviceNet) and event input.
|
|
Symmetricom time displays are designed to provide widely visible time to local or remote areas. Ranging in character size from 0.5 inches to 4 inches high, these displays can be mounted in instrumentation racks, consoles, on ceilings/walls or desktop areas. Our Airborne Time Display is a small and rugged airborne display that can be mounted in a standard aircraft instrument panel.
All of Symmetricom's time code products are available with several optional configurations, and several are capable of displaying countdown time.
|
|
|
The VM500 vibration monitor offers incredible versatility and functionality in a small 1/8 DIN package, for an attractive price. It provides fully scalable 4-20 mA output for your control system, and also includes two form C relays for a variety of uses. The VM500 is available in dis-placement, velocity, acceleration and even temperature models for 10, 100, and 500 mV/g accelerometers and "J" type thermocouples. Options include RMS or Peak display, as well as a wide range of high pass and low pass filters to focus on frequencies of interest.
|
|
As well as the standard functions - preset, alarms, RS232 output, Max, Min, Difference, etc - Solartron digital readouts and dual digital displays boast a number of new functions.
For example, the new "Scaling Factor" function can be used to compensate for angled or lever operated probes, or diameter when measured in a V block. It also enables measurement of angles or squares.
Other new functions include the "Gauging Mode" - allowing global pass/fail evaluation of up to 30 scan channels -and "Max A Max B".
Ergonomically designed for the operator, the DR700 can be used with multiple probe fixtures using either Linear Encoders, Digital Probes or a combination of both - making it a truly versatile addition to the Solartron "Orbit" range.
|
|
ESA Text Terminals are designed
for applications that require an
interface that is easy to use and
program. All of the function keys,
including the 18 supplementary
keys of the VT160W, can be used to
give direct commands like Start and
Stop to the machine.
Main characteristics (model
dependant):
- Alarms, passwords, recipes
- Mathematical functions
- Two drivers run simultaneously
- Serial or parallel printing
- Integrated Profibus-DP and CAN
|
|
LH51/52
Digital Readout Displays
Compact display with numerous functions for milling machines (LH51) and lathes (LH52).
* Selectable display resolution
* Selectable absolute/incremental display
* Linear error compensation
* Reset, preset and recall
* Centerline and bolt hole* calculations
* Datum point memory
* Power loss data memory
* Radius/Diameter selection
* Self-diagnostics
* Direct inch/metric conversion
* 9 Tool Offsets**
* *LH51 only
* **LH52 only
|
|
Product ISI36
Technical data - electrical ratings :
Accuracy 0...0.05 %
Approvals UL/cUL
CE conform
Backlit 24 VDC ±20 %, 50 mA
Control NPN
PNP
Floating contact
Counting frequency 7 kHz, 12 kHz, 30 Hz
Digit height 8 mm
Display LCD, 7-segment display
Display range 0...12000
Display refresh 1 s
Emitted interference DIN EN 61000-6-4
Function Tachometer
Frequence display
Input logic NPN / PNP coded by wire jumper
Interference immunity DIN EN 61000-6-2
Measuring principle Gate time measurement 1 s
Number of digits 8-digits
Power supply lithium battery (approx. 8 years at 20 °C)
Unit displayed 1/s
Other products available:
|
|
Readouts series VD3 and VD4 display voltage, current, speed, angular or linear positionss and any physical or chemical measure which can be converted into an electrical signal.
All the different availble versions can read analogue or digital signals alike.
The indicators series VD4 avail on front parameter-entering keys and on two relay-outputs with threshold alarms on the displayed variable.
|
|
|
Electronic indicators for pressure, flow, volume, temperature and level measurement. To program the device a password must be entered. Data are displayed on a 4-digit dispaly; easy setting by using the front panel keys. Some models are available with automatic programming of the sequence of operations. It is possible to programm up to 4 alarms, fix the beginning angìd the full scale values, set the engineering units, the decimal points and the peak value. Bargraph indicators and low-cost series available.
|
|
FUTEK products include Sensors, Cables, Digital Displays, Signal Conditioners, Accessories, and Sensor Verification Systems just to name a few.
Once a particular Futek Transducer has been chosen for a given application, provisions must be made for appropriate excitation and for conditioning the output signal. The nature of the conditioning depends on the electrical characteristics of the transducer and the destination of the signal.
FUTEK related Signal Conditioners with Digital Displays are as follows:
1) IBT100 Bench Top Rotary Torque & Angle Digital Display
2) TEDS Capable IBT500 Bench Top Signal Conditioner with Digital Display
3) IHH300 Hand Held Portable Signal Conditioner with Digital Display
4) TEDS Capable IPM500 Panel Mount Signal Conditioner with Digital Display
5) IPM600 Color LCD Touch Panel Signal Conditioner with Digital Display
6) EXCLUSIVE TEDS Capable Verification Calibration (VCAL) System ONLY offered at FUTEK
|
|
Examples:
-JUMO di 308 Digital Indicator, microprocessor-controlled, with max. 2 inputs, wide range of expansion options, panel-mounting DIN housing, bezel 96mm x 48mm (70.1550)
Configurable process display text (max. 24-character running text)
Alarm signal text with color changeover green-red (also as running text)
Up to two configurable analog inputs
Three option slots
Math and logic module (option)
4 limit comparators
Fast and convenient configuration through setup program
RS422/485 interface (option)
PROFIBUS-DP interface (option)
cUL/UL approval applied for
-JUMO di48 indicating instrument, programmable via PC Setup with voltage output 24V DC / 45mA, bezel size 96 x 48mm (70.1520/95.1520)
configuration from PC through setup program
electrically isolated measurement input (setup is not isolated from the measurement input)
many different inputs possible: resistance thermometer in 2-/3-/4-wire circuit, thermocouple, resistance transmitter, standard signals, potentiometer in 2-/3-/4-wire circuit
internal cold junction
customised linearisation
offset correction
input filter for interference suppression
24 V supply for 2-wire transmitter
|
|
New PAX Lite Model with Relay Outputs : PAXLA
The first in a new series of PAX Lite panel meters has just been released. The new PAXLA can accept DC current, DC voltage, or process input signals, and scale them to a desired readout. This new model also has two form "C" relays capable of switching up to 5 amps, providing complete dual setpoint output control capability!
Flexibility has been built-in to the power supply as well. The newly designed universal power supply accepts 50 to 250 VAC or 21.6 to 250 VDC and provides 24 VDC output for sensor power.
Combining dual setpoint capability, the universal signal input and power requirements, and a low PAX Lite price, the new PAXLA offers exceptional value in a panel meter!
- 5 Digit, 0.56" High Red LED Display
- Programmable Scaling and Decimal Points
- Programmable User Input
- Dual 5 AMP Form C Relay
- Universally Powered
- NEMA 4X/IP65 Sealed Front Bezel
- Optional Custom Unit Overlay with Backlight
- Minimum and Maximum Display Capture
|
|
Seneca panel mounting units, designed for process control, are dedicated to small and medium industrial processes automation.They have been designed in order to answer to diffuse requirements in industrial enviroment: distributed process control reducing costs and build low cost indipendent peripheral units.
Our indicators, totalizators and batch controllers have very bright LED display, multistandard inputs, sensors power supply, and they are very easy to calibrate.
|
|
MDA241
Digital panel instrument (current) MDA241, 3 1/2 digit, dimensions 96x24x89 mm
MDV241
Digital panel instrument (voltage) MDV241, 3 1/2 digit, dimensions 96x24x89 mm
MDC241
Digital panel instrument (temperature) MDC241, 3 1/2 digit, dimensions 96x24x89 mm
MDK241
Digital panel instrument (process variables) MDK241, 3 1/2 digit, dimensions 96x24x89 mm
MDR241
Digital panel instrument (pressure) MDR241, 3 1/2 digit, dimensions 96x24x89 mm
MDA245
Digital panel instrument (DC currents) MDA 245, 3 1/2 digit, dimensions 48x24x85 mm
MDV245
Digital panel instrument (process variables, DC voltages) MDV 245, 3 1/2 digit, dimensions 48x24x85 mm
MDC245
Digital panel instrument (process variables) MDC245, 3 1/2 digit, dimensions 96x24x89 mm
MDA480
Digital panel instrument (DC and AC currents) MDA 480, 3 1/2 digit, dimensions 96x48x166 mm
MDV480
Digital panel instrument (DC and AC voltages) MDV480, 3 1/2 digit, dimensions 96x48x166 mm
MDK480
Digital panel instrument (process variables) MDK480, 3 1/2 digit, dimensions 96x48x166 mm
MDR480
Digital panel instrument (pressure) MDR480, 3 1/2 digit, dimensions 96x48x166 mm
MDZ480-F
Digital panel instrument (frequencies) MDZ480, 4 digit, dimensions 96x48x166mm
MDZ480-V
Digital panel instrument (frequencies) MDZ480, 5 digit, dimensions 96x48x166 mm
|
|
A Capacitive Level Sensor measures level by applying a radio frequency (RF) signal between the capacitance electrode (the probe) and the electrically conductive vessel wall. The RF output creates a small amount of electrical current that flows through the medium (the dielectric) from the probe to the vessel wall. When the level increases or decreases the dielectric constant, or the capacitance reading, increases or decreases.
In other words, the level change results in a variation of the capacitance value around the probe, depending upon the degree of immersion. For point level detection, the probe's electronics detect the change in the RF signal and then alter the state of the level switch. For continuous level detection, the probe's electronics convert the RF signal into a 4-20mA-output signal that is proportional to the change of the level.
|
|
|
Universal digital indicator for pressure transmitters. Offers the possibility to process all standard signal-inputs. The RS-485-/422 interface connects the instrument to a PC for data acquisition. Four different models cover all configurations (outputs, switching contacts etc.).
|
|
The DM- 100 Digital Load meter displays motor load. The DM-100 can be adjusted to read the motor load in :
- Percent 0 - 100%
- Horsepower
- kW or W
The input for motor load indication comes from the analog output of a Load Controls, Inc. Load Control or from a LCI Powel Cell power transducer
.
|
|
ES-8 & ES-10 series
Model(2 axis and 3 axis)
ES-10S (simple), ES-10M (miller), ES-10B (borer), ES-10G (grinder),
ES-10L (lather), ES-10E (EDM), ES-10W(wirecut), ES-10P (projector),
ES-10T (tool setter)
Basic functions:
Clear zero
Centering (1/2)
In/mm display
Coordinate entry
Abs/inc switch
Power off memory
199 subdatum
REF memory
Reselution switch bettween 0.001mm, 0.005mm, 0.0001mm, 0.0005mm, 0.01mm, 0.005mm
Special functions:
Built in calculator
PCD pitch circle diameter
LHOLE linear hole positioning
INCL inclined machining
SHRINK shrinkage calculation
R (simple R & smooth R) function
Linear error & non-linear error compensation
Vibration filtering
Rotary encoder readout
State of the Art Electronics Technology
High noise immunity EMC design
Robust Casing, Chromium Plated Panel
The front plate of the ES-8 is built by an 1.5mm thickness electroplated steel, the back cover is built by 3.5mm thickness high strength ABS plastic injection case to provide a high quality robust casing. Front panel is Chromium plated for easy cleaning.
Adaptable to poor electrical source Low power consumption approach is used in the system design of ES-8, therefore, even ES-8 is designed for very wide voltage supply range ( 160V~260V / 80V ~ 130V ) operation, linear power supply can still be used without serious heat generation, linear power supply offer execellent noise immunity and proven highest reliability.
Use of the combined capacitor-varistor noise filters in the power supply system to ensure highest possible noise and surge immunity to poor electrical source.
|
|
The DMP200 series consists of four universal input indicators offering unparalleled price and performance. The use of surface mount components and modern microprocessor technology has enabled powerful features to be packed into a standard 1/8 DIN case.
The DML300 series of digital panel indicators is designed specifically for use with LVDT transducers. The "Fast-Cal" feature provides a fast and simple means of calibrating an indicator to the transducer at any two stroke positions.
|
|
|
This digital panel indicator series accepts a wide range of input signals (process, temperature, pulse/impulse, weight, etc.), that can be displayed in any required value. It also includes a green/red colour change display feature, which clearly visualises the status of a process.
|
|
The GDU is a digital indicator with configurable entrance and an exit of configurable alarm. It can be used to indicate diverse greatnesses like, for example: RPM, To, V, Hertz... Owns configurable from 0 to 1999 and entered rank of type: 0 à 10V, 0 à 5V and 4 à 20mA. It owns an exit of relay that can be used like alarm of minim, principle, inside and outside band. The access to programming of the parameters is protected by password.
Dimensions: 48x96x95mm;
Approximate weight: 360g;
Feeding: 110/220Vca (50-60hz), 24Vca/Vcc, 12Vca/Vcc;
Exit to relay: 5A.
|
|
Programmable panel meter for process, temperature and load cells.
Size: 96x48x60 mm.
Tricolor display: ±19999 (4 ½ digits)
|
|
A comprehensive range of high accuracy multi function digital metering systems offering measurement, display and communication of over 100 parameters, including true RMS measurement for total harmonic distortion and power quality data. Integra products are fully programmable via a simple menu driven interface and can be integrated into energy management systems via various communication protocols. To suit requirements, Integra offers pulsed, analogue and digital output options, and a choice of DIN, ANSI and JIS case styles, with high quality LED or LCD display.
|
|
|
When your application calls for variable indication, Digital Panel Meters (DPM) are the right tool. Voltage, current, pressure, volume, temperature, frequency and other parameters can be monitored and displayed. With a variety of input and ouput options, DPMs can be used in most any application and the product's short depth makes it flexible and accommodating to panelbuilders' needs.
|
|
PAX Series : Large range of Intelligent panel meters
The PAX Meter is the workhorse of our panel meter line-up. From its sunlight readable display to the wide variety of field-installable options cards, the PAX Meter will easily handle your application requirements. Select from the widest range of inputs in the industry, including models for both digital and analog signals. Their Comms capability allows data collection at various points of the machine and communicates the information to your management system, while still providing the machine operator with a localized display. Installing a complete system? Learn how to put a PAX Meter to work for you.
PAXC - Counter
PAXCK - Timer & Real Time Clock
PAXD - DC Volt & Current Input
PAXDP - Dual Process Input Meter
PAXH - AC True RMS Voltage and Current Meter
PAXI - Counter Rate Meter
PAXP - Process Input Meter
PAXR - Rate Meter
PAXS - Strain Gage Input
PAXT - Thermocouple & RTD Panel Meter
PAXTM - Preset Timer
Display of 5 LED digits of 14mm, with variable intensity for good outdoor readability (factor 1 to 15)
These intelligent solutions can be enabled with optional plug-in cards, for set point alarms (2 or 4),analog output and communications (RS232, RS485, Modbus, Devinet, Profibus), enabled Ethernet via external module (ICM8)
|
|
- Input Supply 4-20mA
- Up to 5 Digits of Display Range
- Sensor Drift Compensation at 0%
- Universal AC Supply Voltage
|
|
|
|
Indicators, Displays
