|
|
| Products 91 to 120 of 295 |
|
|
|
|
MAXLOGIC MG-16160 INTELLIGENT ANALOGUE ADDRESSABLE FIRE ALARM CONTROL PANELS
The latest Maxlogic Analogue Addressable Fire Alarm Control Panel operates on
unique VIP communication protocol which is combatible to use with all MaviGard
Harezmic products. An easy way to use in large sites up to 16 loops and 2032
addresses.
FEATURES
EN54-2 and EN54-4
Compatible with MaviGard Harezmic Series addressable devices.
Up to 64 panels and/or repeater panels can be assembled into a network
LCD (240 x 64 characters) with blue backlight
1000 event log memory
1000 user-defined zones
Extendable loops up to 16 loops, max. 2032 address capasity
Detailed fire alarm and fault warnings
Top priority of fire alarm indication,
different buttons for fire and other events,
caterogical classification due to events.
Real time clock
Communication interrupt for fast fire alarm detection in 1.5 sec
Loop polling in 7.5 sec
4 programmable supervised remote control inputs
Models with printer available
Protection from electromagnetic interference
Communiation with RS232/RS485,GPRS/TCP-IP
Microprocessor-controlled design
Supervised peripheral devices, extension cards (power supply, loop extensions,
printer...)
Day and Night mode, pre-alarm, contamination warning
Virtual panel, supervisor applications
Input/output modules can be connected to panel directly
Advanced control/monitoring features
Creating cause-effect scenarios due to device or zones
By the help of Boot Loader software
updating software on the site
Event selection for input/output devices
Advanced parametric arrangement options for input/output devices
Creating user-defined event type
|
|
CONVENTIONAL FIRE ALARM CONTROL PANELS
MODELS:
MP-8 Series
MG-8 Series
MS-64 Series
SD64+ Series
FEATURES:
Highlights
2, 4, 8, 16, 32, 64 zone models(differs due to panel models)
Zonal Fire and Fault LED indicators
Button control key
Zone Test and Zone Disable modes
Zone location text on front panel
Soft-touch buttons
Microprocessor-controlled
PCBs made by use of Surface Mount
Technology
Supervised Sounder outputs
Supervised Relay outputs
Compatible with all popular conventional fire detectors
Protection against electromagnetic interference
Optional repeater panels
Optional relay modules
Auxiliary power supply output
LED test by use of single button
For more information email us
|
|
HAREZMIC MG-7100 SINGLE LOOP INTELLIGENT ANALOGUE ADDRESSABLE
FIRE ALARM CONTROL PANEL
Single loop structure, stylish exterior design and enhanced programmability make the MG-7100 an economical and technologically top-level solution for small and medium sites. EN 54 and SSPB (Russia) and GOST R certified. Approved by Kazakhstan, Oman, UAE, and Bahrain Civil Defence authorities.
Features
Very Intelligent Communication Protocol
Display priority to fire events
Polling interrupt for fast alarm detection
64 x 240 pixel LCD with adjustable blue backlight
Password-protected access levels
Printer output
Displaying detector measurements
Real-time clock
1000 event log memory
Microprocessor-controlled
PCBs made by use of Surface Mount Technology
2 programmable and supervised sounder outputs
3 programmable relay outputs
16 user-defined zones
Loop polling in 7.5 sec
Protection against electromagnetic interference
Auxiliary power supply output
Soft-touch buttons
Built-in silenceable buzzer
|
|
|
|
|
|
FireNET (9th Edition)
Analog Addressable Fire Alarm Control Panel
STANDARD FEATURES
UL 864 9th edition approved
Analog design using Hochiki's advanced DCP protocol for fast and robust communication
Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
Uses standard wire, no shielded or twisted pair required on SLC loops
Supports Class B (style 4) and Class A (style 6 or 7) SLC loops
4 on board Class B (style Y) NAC circuits rated at 2.5 Amp each
Programmable sensitivity levels per device & automatic day/night sensitivity modes
Automatic daily calibration & drift compensation routine
Large 8-line x 40-character LCD display (320 char.)
2 or 4 loop versions (800 addresses/sub-addr. max.)
Dual RS-485 bus for panel network
2 built-in RS-232 interfaces for programming via a PC and serial printer interface
5 on board programmable Form C relays rated at 1 amp at 30VDC (Fire1, Fire2, trouble, supervisory, aux.)
500mA of auxiliary power available rated at 24 VDC
Loop Explorer Windows® configuration utility
*500 network wide software zones
Network Capability of up to 64 panels
RS485 slave bus for expansion - up to 32 FN-4127-IO boards or up to 15 FN-LCD-S serial annunciators and up to 16 FN-4127-IO boards
Auto-learn feature
Built in help and alarm information screens
Fire Drill test function
Walk Test function
Alarm Verification feature
FireNET is UL listed for Central Station Service when used with the Bosch D9068 contact dialer
Powerful & versatile Cause & Effect programming (up to 500 maximum, network wide) including: *Cause & Effect action, *Disable function configuration, *Test mode configuration
|
|
General Information
4 loop analogue addressable fire panel utilisting soft addressing technology and incorporating a highly versatile touch screen user interface.
Supplied with extended autonomy battery and integral printer
Touch screen user interface
Integral battery and power supply
Integral printer
Optional hinged lockable cover
Wide range of compatible interfaces
Specification
Brand: Menvier
Dimensions (mm): L495 X D200 x H400
Weight (KG): 27
Cable Entry: Top or rear
IP Rating: IP20
No. of Loops: 4
Standby Period: Dependant on system loading
|
|
What is CSTN?
CSTN (Colour Super-Twist Nematic) is a Liquid Crystal based Display technology that produces full-colour paper-like image. Unlike TFT, CSTN is based on a passive matrix, which is less expensive to manufacture. Recent advances in technology and manufacturing process have made CSTN an economical alternative to active matrix displays.
The advantages of using CSTN:
Economical solution
- produces TFT comparable image quality at a low cost
Easy to customize solution
- resolution and display size can be tailored to suit
customer's specification
Easy upgrade from monochrome
- Limited software and hardware modification are
necessary to run CSTN display with 8051 microcontoller
Low power consumption
- from 0.7 mW; Lower heat output
|
|
Series SGX500
Graphic boards
Graphic LED Matrix Displays for presenting texts,
graphics, videos, animations...
Standard sizes 1,0 x 0,5 m, 1,5 x 0,5 m, 1,5 x 1,0 m
and 2,0 x 1,0 m; further sizes on request
Multicolor (red/green/orange), 256 color shades
Embedded industrial PC with sound output
Single- and double-sided unit versions
Protection type IP54
HTML-compatible
|
|
- All product designed and produced by Topway ourselves.
- Graphic (full dots) LCD display.
- All kinds of resolution:
160 x 32, 202 x 32, 128 x 64, 192 x 64, 192 x 128, 240 x 64, 256 x 64,
240 x 128, 240 x 160, 320 x 160, 320x200, 320 x 240 dots
- LCD type: STN-Blue, Grey, YG, FSTN-Pos. Neg. as options.
- LED Backlight: White, YG, Green, as option.
- LCD Controller: T6963, RA8835, S1D13700 etc. as option.
- We have full product line with different module size, display model, 3v/5v power supply as options.
|
|
|
|
|
|
2408i Universal Process Indicator and Alarm Unit
Accurate stable measurement of temperature, pressure, level, flow and other process variables are provided by the 2408i universal indicator. An optional second process value input allows the average, difference, minimum or maximum of two values to be displayed. Temperature linearization functions for nine thermocouple types and Pt100 resistance thermometers are selectable. Other input linearizations can be factory downloaded. Strain gauge and presssure sensor inputs can be energized from an internal 5 or 10Vdc supply. An automatic calibration routine is provided to remove zero and span offsets. For flow measurements, square root extraction is available as standard.
Features:
- Four alarm setpoints: For alert and plant protection
- Serial communications: For supervisory control and data acquisition
- DC retransmission: Fully isolated retransmission to remote control and monitoring equipment
- Second PV input: For monitoring auxiliary signals
- Strain guage input: For pressure monitoring
|
|
|
|
|
|
The LHL, LHI meets or exceeds factory Mutual (FM) Approval Standard temperature Limit Switches Class 3545.
They are designed to automatically shut down a process when the measured value exceeds a pre-programmed value.
Alarm masking:
Puts the alarms in the stand by condition (mask) during instrument power up or masks a deviation or band alarm if the alarm condition is a
result of a set point change. In both situations the instrument maintains the alarm masking for the duration of the alarm condition.
Logic input:
These instruments are equipped with a logic input used to acknowledge an alarm condition by an external contact.
Maximum and/or minimum data hold:
The LHI is able to memorize the maximum and the minimum measured value. This function is automatically enabled at instrument power up
and it is always active.
Power supply failure indication:
These instruments are able to signal if a power failure occurs during normal instrument operation.
Power fail recovery settings are user configurable.
|
|
|
Configurable indicators for temperature, pressure, force, current and AC voltage, position, normalized inputs, with up to 4 alarm outputs, analog retransmission output, serial communication
|
|
Universal digital panel meter
Reference : AK9400U-2
Setable with keyboards on front plate
Display 99999 Counts
Process input current (<22mA), tension (< 200Vdc)
Potentiometer
Température input Pt100 and Thermocouple
Sensor power supply 24Vdc, 22mA
4 relays output 1RT.
2 insulated analogue outputs curent and tension
1 RS485 MODBUS, JBUS output, allowing configuration and mesure
Input/output insulation 2500V
Power supply 20Vdc to 370Vdc and 80Vac to 265Vac.
|
|
DF30 Display Facia is available in four different window sizes, extra small, small, medium and large as listed below.
Any combination of these window sizes can be supplied in any format, mixed as required in a single display to make up the appropriate matrix required.
Extra Small (30x15mm)
Small (30x3Omm)
Medium (60x3Ornm)
Large (60x6Omm)
|
|
|
|
|
|
PFM - PLANT FLOOR MARQUEE SERIES
LARGE DISPLAYS WITH UNPRECEDENTED COMMUNICATION ABILITIES
* Tri-color Display Provides Instant Notice of Important Information
* Displays Information From Any G3 HMI, And SX/GT Models of the Data Station and Modular Controller
* Graphical Design Allows Bargraphs, Custom Symbols and Graphics
* Four Sizes for a Wide Range of Applications
* AC Powered (110 or 220 VAC, 50 / 60 Hz)
The PFM series facilitates the collection, calculation and communication of critical production and process information such as production targets, cadence, alarms, machine uptime and downtime measurement, and OEE (overall equipment effectiveness). Available in four models, the PFM series offers highly visible, multi-color conveyance of data to the entire plant floor and to the enterprise level. The smallest is suitable to provide data at the machine level, while the largest can be used to communicate information across an entire factory floor at distances of up to 600 feet (182 meters).
Far more than a simple large display, the PFM series features the unprecedented capability to communicate with over 170 different protocols, and to send and receive data from seven or more device types simultaneously.
These unique capabilities, which are provided through a required host device ( Red Lion G3, DSP, or MC), allow collection of data from various sources - with integrated calculation to optimize displayed information in the way it is most useful to your facility. Along with the advanced network communication and data collection, the PFM host enables remote monitoring and FTP transfer of data.
|
|
Large Displays for process control
· Inputs: ±10V, ±0-20mA.
· Three digits size available : 57, 100 and 250 mm.
· From 2 to 5 digits, 1 or 2 displaying sides.
· Serial line option (RS232 or RS485) and dual relay output option.
|
|
LDSS - LARGE DIGITAL DISPLAY FOR SERIAL INPUTS
Ideal for Production line Monitoring, Temperature Zones Monitoring on the Plant Floor, Tank level Monitoring, Operation Timing, Storage/Process Temperature Monitoring...etc...,
The LDSS is the perfect solution to display a value that is currently stored in a register and displaying it on the plant floor.It is capable of accepting RS232 or RS485 as the input and displaying it as a remote or slave display.
- Exist in 2 versions, with display heights of 2.25" readable to 130' or the 4" readable to 180'.
- Input: accepts serial ASCII data from an host device
- Selectable for RS485 or RS232 serial interface
- Display capability: full numeric, limited alphabetical (missing M,W & X)
- Decimal point transmetted with the value
- Display selections: secondary display capability, Display scroll option
Supply a complete monitoring solution in combination with the Data Station Plus, the Modular Controller or one model of the G3 series
|
|
|
|
|
|
When size matter ! Discover the economical new range of Red Lion Large Displays : the LD series, to visualize your main production datas from a distance.
LD
Large Display Counter and Rate Indicator
- 2.25" & 4" High Red LED Digits
- Available in 4 or 6 Digit Versions
- Single or Dual Counter with Rate Indicator
- Programmable Scaling and Decimal Points
- Programmable User Input
- AC or DC Powered
- 5 AMP Form C Relay
- Aluminum NEMA 4X Case Construction
LDT
Large Display Timer and Cycle Counter
- 2.25" or 4" High Red LED Digits
- 6-Digit Bi-directional Timing Capability
- 5-Digit Cycle Counting Capability
- Selectable Timer Ranges and Operating Modes
- Elapsed Timer and Preset Timer Functionality
- Serial Communications (Selectable RS232 or RS485)
- Programmable User Input
- AC or DC Powered
- 5 AMP Form C Relay Output
- Aluminum NEMA 4X Case Construction item
LDA
Large DC Volt/Current/Process Display
- 2.25" & 4" High Red LED Digits
- Programmable Scaling and Decimal Points
- Programmable User Input
- Dual 5 Amp Form C Relay
-Aluminum NEMA 4X Case Construction
-RS232/RS485 Serial Communications
- Universally Powered
LDSS
Large Serial Slave Display
- 2.25" or 4" High Red LED Digits
- Displays up to 6 Digits of Serial ASCII Data
- Dual Display Buffer Allows Alternating Displays
- Selectable RS232 or RS485 Serial Interface
- Connects Directly to Red Lion Products with Serial
- Programmable User Input
- AC or DC Powered
- Aluminum NEMA 4X/IP65 Case Construction
|
|
The product featured on the photo is a CSTN display.
What is CSTN?
CSTN (Colour Super-Twist Nematic) is a Liquid Crystal based Display technology that produces full-colour paper-like image. Unlike TFT, CSTN is based on a passive matrix, which is less expensive to manufacture. Recent advances in technology and manufacturing process have made CSTN an economical alternative to active matrix displays.
The advantages of using CSTN:
Economical solution
- produces TFT comparable image quality at a low cost
Easy to customize solution
- resolution and display size can be tailored to suit
customer's specification
Easy upgrade from monochrome
- Limited software and hardware modification are
necessary to run CSTN display with 8051 microcontoller
Low power consumption
- from 0.7 mW; Lower heat output
|
|
TN, STN, FSTN Technologies
For segmented or alphanumeric / graphic displays; TN with colour segments and background other than B/W ;CSTN, TFT technologies
For graphic displays up to 5'' diagonal size
|
|
- Do you want to open China market? Chinese Fonts embedded products can help you to speed up your design process and improve display speed.
- All product designed and produced by Topway ourselves.
- Graphic (full dots) LCD display, we can offer the module with Chinese Fonts Library Embedded.
- All kinds of resolution:
160 x 32, 128 x 64, 192 x 128, 240 x 64,
240 x 128, 320 x 240 dots
- LCD Type: STN-Blue, Grey, YG, FSTN-Pos. Neg. as option.
- LED Backlight: White, YG, Green, as option.
- LCD Controller: ST7920, RA8803,etc.
|
|
General description:
Gill Wind Speed Indicators are compatible with WindSonic and WindObserver anemometers, enabling the display of wind speed and direction using high visibility LED technology.
Gill Wind Speed Indicators are available in two display formats (standard and marine) and 110 or 240 V ac operation with RS422 or NMEA inputs.
|
|
J1805
Format DIN 96x96.
Indicator panel to 8 Multicolor LED 5x10mm high brightness.
7 choice of color display, selectable from the front by switch.
Identical in appearance to J1800 and mechanics.
- 8 multicolored LEDs "high brightness", color possible: White, Green, Yellow, Red, Blue, Magenta, Cyan.
- Button "test LEDs" in front.
- Relay "synthesis" report of distance integrated, selectable per-channel. No acknoledge.
- Voltage range of 10Vac/dc to 60Vac/dc. (Models 24Vac/dc and 48Vac/dc are grouped).
- Lighting by closing contact entry.
- Easy to create labels (PC).
- Economic and durable.
|
|
PAN3V
Format DIN 48x48
The PAN3V is a small economic panel especially studied for the starting cupboards or the electric control panels.
It makes it possible to announce :
- 3 gathered information.
- "Start, stop, default".
- "presence of the 3 three-phase tensions" of an electric departure.
Supply :
- Low voltage (12Vac/dc, 24Vac/dc, 48Vac/dc).
- Hight voltage (130Vdc, 220Vac, 380Vac).
Equipped with 3 removable indicators LED "high luminosity" (possible colors: green, yellow, red, blue, white), of its connector scewless removable, its test lamp optional outside, it is very easy to install and will save to you an precious time.
Option :
Lamp test output.
|
|
DF30 is available in four different window sizes, extra small, small, medium and large as listed below.
Any combination of these window sizes can be supplied in any format, mixed as required in a single display to make up the appropriate matrix required.
Extra Small (30x15mm)
Small (30x3Omm)
Medium (60x3Ornm)
Large (60x6Omm)
|
|
LED display
Mounting vertical
Segment height: 10 m
|
|
Series S302/SX302
Numeric and alphanumeric large size displays
Character heights 57, 100, 160, and 250 mm
Displays with brilliant red LEDs (optional blue, green, white)
Light reflecting display elements in LRD®-technology
Interfaces Profibus, Modbus, serial, parallel, analog; further interfaces on request
Single- or double-sided displays
Displays with dimension symbols
Set-up menu for setting parametersand operating modes
Equipment packages for outdoor applications
Protection type IP54 and IP65
|
|
Powered by the process loop signal 4-20 mA.
Loop drop: 5 V max.
Size: 48x24x40 mm.
Display (red LED): -1999/9999
|
|
DPM 942
- 3½ Digit LCD Meter
- 4-20mA to read 0 to 1000
- Loop Powered
- Screw Terminal Connections
- Bezel Mounted Module
The DPM 942 is a 3? digit LCD 4-20mA loop powered meter with 19mm (0.75") digit height. Connection to the meter is via screw terminals. The meter can be panel mounted using the bezel. An optional IP67 / NEMA 4X bezel (BEZ 900-IP) is available for waterproof applications. This is a popular part, normally stocked in high quantity and suitable for new designs.
|
|
As well as the standard functions - preset, alarms, RS232 output, Max, Min, Difference, etc - Solartron digital readouts and dual digital displays boast a number of new functions.
For example, the new "Scaling Factor" function can be used to compensate for angled or lever operated probes, or diameter when measured in a V block. It also enables measurement of angles or squares.
Other new functions include the "Gauging Mode" - allowing global pass/fail evaluation of up to 30 scan channels -and "Max A +Max B".
Ergonomically designed for the operator, the DR700 can be used with multiple probe fixtures using either Linear Encoders, Digital Probes or a combination of both - making it a truly versatile addition to the Solartron "Orbit" range.
|
|
|
|
Indicators, Displays
