|
|
|
The 16-channel thermocouple monitor designed to read, scan, print and log temperatures or voltages. You can use any one of seven standard thermocouple types to read temperatures from -200 °C to +1700 °C. For remote monitoring applications, the SR630 can time-stamp and store up to 2000 readings in non-volatile memory for later analysis.
|
|
|
ADOS manufactures a wide range of weight serial repeaters that allow to find the best solution for all different industrial environments. Versions with current or voltage analog input are also available.
|
|
We offer an extensive range of high quality off-the-shelf 7 segment LCD panels, with a wide range of character heights and applications in mind.
These displays can be provided with or without metal pins for easy interconnection to your product. If there are specific icons and sizes that you require other than those shown our low cost custom design service can create ANY type of display you can think of!
|
|
|
Forge Europa is renowned as a leader in the field of high reliability numeric LED displays. We offer a wide range of standard 7 segment displays in both single and multiple digit formats with character heights ranging from 7.6 mm (0.3") to 200 mm (7.9").
|
|
ED-07.CA-R - EUROLED SMD 7- Segment Display, Common Anode, Red, 624nm
EUROLED SMD 7-Segment Display, red, Common Anode,
Brilliant light output
Only 4 mm total height
Withstands high solder treatment
For all miniature applications
On 24 mm blister tape
|
|
NOT RECOMMENDED FOR NEW DESIGNS.
Hexadecimal display containing a four-bit latch, decoder, driver, and 4 × 7 light-emitting-diode (LED) character with two externally-driven decimal points in a 14-pin package. The LED driver outputs are designed to maintain a relatively constant on-level current of approximately 5 mA through each LED that forms the hexadecimal character. This current is virtually independent of the LED supply voltage within the recommended operating conditions. The decimal point anodes are connected to the LED supply; the cathodes are connected to external pins.
|
|
Features
- 0.2INCH DIGIT HEIGHT.
- LOW CURRENT OPERATION.
- EXCELLENT CHARACTER APPEARANCE.
- I.C. COMPATIBLE MECHANICALLY RUGGED.
- GRAY FACE,WHITE SEGMENT.
- PACKAGE : 650PCS / REEL.
- MOISTURE SENSITIVITY LEVEL : LEVEL 4.
- RoHS COMPLIANT.
Description
The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.
|
|
Alarm panel – type AL8-2
The alarm panel is suitable for switchboards in industrial and marine plants for alarm and control purposes.
Features include:
- Compact Q96 design
- Extremely easy push-button programming
- Individual programming of each input: N/O or N/C, time delay, alarm inhibit, output and cable supervision
- Up to 5 units in master/slave configuration
- Clear identification of first alarm received in case of successive alarms
The alarm panel AL-8 is provided with:
- 8 alarm inputs
- 3 relay outputs: - 1 output for connection of horn and 2 outputs used for transmission of group alarms, selective disconnection of faulty equipment, etc.
|
|
|
|
|
|
FILTER ALARM PANEL AND SMARTFILTER CONTROL SWITCH
The Polylok filter alarm panel and switch provides a visual and audible notification of impending filter and tank servicing. Our Patented SmartFIlter control switch attaches to Most Polylok Filters and All Zabel & Best Filters. The filter alarm switch activates when the filter cartridge is near capacity on solids that have built up through the filtering process. The filter alarm switch sends a signal to the alarm panel activating the septic tank alarm. The owner will need to call a local septic service company for immediate service.
FEATURES:
- Complete package includes standard VRS control switch with 15 feet of cable, indoor/outdoor alarm panel, and an effluent filter
- Alarm panel, control switch, and an effluent filters can be purchased separately or as part of a system package
- Alarm panel features manual alarm test switch and horn silence switch
- Alarm horn rated 82 decibels at 3 meters
- Direct interface of control switch and effluent filter insures proper placement of switch
- Alarm sounds when the tank and filter reach 90% maturity
- For indoor/outdoor use
- Three-year limited warranty
|
|
Example:
MONOCOLOUR OUTDOOR DISPLAY ED 40
Technology LEDs
Number of lines 1 to 4 lignes
Brightness Outdoor
Brightness adjustment Yes
Colour Red (option Amber ou Green)
Operating modes 18 modes
Character set 12 types
Built-in animations Yes (100)
Programming mode TC3 programming keyboard or Software
Interface communication RS232, RS485, Ethernet (option)
Temperature probe Yes
Type of case Aluminium, IP 54 RAL 5004
Operating temperature range -10° to +45°C
Power supply 230 VAC / 50-60 Hz
Mounting support Wall mount support Included
TECHNICAL SPECIFICATIONS
Pixel diameter 5 mm
Nombre de LEDs par pixel 1
Microprocessor 16 bits
Message capacity 128 kb
Angle viewing +/- 30°
Front face Polycarbonate
Baud rate de 2400 à 38400 Bauds
|
|
When you focus on the process, you're focused on productivity & efficiency. Our highly visible, Alpha 4000 series NEMA 12 displays, ensure continued productivity & safety throughout your production facility. From your desktop PC, your PLC or HMI system you can relay real time production data and manage quality assurance during the process.
Download brochure Alpha 4000 IP55 (182Ko)
Don't risk production coming to a screeching halt.
Our 4000 Series NEMA 12 provides maximum protection against windblown dust and splashing water aroundany of your industrial processes.
|
|
|
Alphanumeric displays are available in a range of sizes from 12.7 to 57 mm character height in single and 13.6 mm dual digit options plus a siingle digit monolithic version.Ideal for low cost text displays, 14 & 16 segment configurations can be supplied and the dual digit 13.6 mm alpha display is also offered with inbuilt driver IC.Typical applications include transportation and point of sale information.
|
|
TYPE: LCD-COG-module LCD-DATA:FSTN-mode transflective / positiv graphic
BACKLIGHT: LED edge amber CONTROLLER: SSD1815 ; FEATURES: COG module with special shaped glass + special shaped FPC ; REFERENCE NO. 123 ; TYPE: LCD-module LCD-DATA:FFSTN-mode transmisive / negative
alphanumeric + segment BACKLIGHT: bicolor LED red and yellow-green
CONTROLLER: KS0066 FEATURES: LCD + Backlight + tact switches +
customers circuitry REFERENCE NO. 090
|
|
|
Edwards Message Centers and Edwards lamp annunciators have proven themselves as the standard of reliability for commercial and institutional applications.
|
|
Series S102/SX102
Digital displays for panel mounting
Numeric and alphanumeric displays
4-, 5-, 6-, 8- or 14-digit LED display
Character height: numeric 14 and 25 mm, alphanumeric 18 and 30 mm
Interfaces: Profibus, Modbus, serial, parallel, analog
Comfortable setting of operation modes and parameters via menu
Bright red LED displays
Reduced mounting depth
Addressable
|
|
At airports and car-parks, production lines and inside buildings, ANKA® large displays by Wöhrle are essential everywhere for rapid and direct information.
Not only do they display text and figures in sizes configurable by the user. Icons and graphics can be displayed clearly, and in many colours too, thanks to the dot matrix LED displays. This considerably increases the attention-getting value.
ANKA® large display units are housed in solid enclosures of protection type IP 65.
The modular and flexible system design provides a number of different expansion options:
- LED large displays, single colour (red, green, yellow, or mixed configuration)
- character height 50 mm, up to 15 lines, up to 40 characters per line.
- LED large display units, multi-colour (red, green, orange). Character heights can be altered:
• at 120 mm character height : one line display 3-20 characters per line
• at 50 mm character height these values are doubled.
|
|
New Series SX502
Alphanumeric large size displays
Multifunctional text display
Standard fixed text memory
Character heights 33 and 50 mm, switchable to 66/75
or 100/120 mm respectively
Red or multi-color LED (switchable between red/green/orange)
Extremely bright SuperBright LEDs for outdoor use
2, 4, or 8 lines with 20 or 40 characters per line
Interfaces Profibus, Modbus. serial, Ethernet TCP/IP, further interfaces
Different kinds of presentation: marquis text, paging, blinking etc.
Protection type IP54 and IP65
Presentation types can vary within a line
Convenient control with an optimized and ergonomic
command set
Optional proportional lettering
Setup menu for setting parameters and operating modes
Degree of protection IP54 and IP65
Equipment packages for outdoor applications
Unit versions readable from one or both sides
Downloadable/uploadable fonts and character sets
|
|
- Product designed and produced by Topway ourselves.
- Character (Alpha Numeric) display.
- Characters x Line (5x8 format):
8 x 1, 8 x 2, 16 x 1, 16 x2, 20 x 2, 20x4, 24 x 2, 40 x2
- LCD Mode: STN-Blue, Grey, YG, FSTN-Pos. Neg. as option
- LCD Controller: KS0066 or Equivalent
- We have full product line with different module size, display model, 3v/5v power supply as options.
|
|
* STN Character Display Modules in the size 8x1 to 40x2.
* STN Graphic Display in the sizes of 1,5" to 2,0" in 262K or Full Color with Backlight LED and Transmissive Display mode.
* STN Graphic Display in the sizes of 1,5" to 2,0" in 262K or Full Color with Backlight LED and Transmissive Display mode.
|
|
|
|
|
|
ANALOGUE INSTRUMENTATION
Large variety of instruments such as: ammeters, voltmeters, phase meters, var meters, watt meters, frequency meters, process indicators, synchronoscope, sequence meters, synchronising relay.
MEG-1000 Isolation measurement, protection ammeters for overload and short circuit, protective dual directional watt meters, etc, in different sizes and mounted on panels or DIN rails.
They are mainly installed on electrical boards, where the electrical parameter has to be displayed without importing small variations.
The advantage of analogue instruments is that they very latently reflect the fluctuation of the parameter.
DIGITAL INSTRUMENTATION
Large variety of instruments, such as: ammeters, voltmeters, frequency meters, tachometers, chronometers, impulse meters, process indicators, multipurpose indicators with 2 output relays, etc. in different sizes and panel or DIN rail mounted.
They are installed on electrical boards where small parameter variations as well as knowing the precise value are important. There is the option to send a value to a PLC or PC, according to model.
CIRCUTOR manufacture too a wide range of current transformers and measuring transducers
|
|
|
|
|
|
LED strip indicator 584
The "semi-analog" LED strip indicator displays the measured value using 71 LEDs. This indicator is designed to withstand very stong vibrations yet has the familiar look of an analog indicator.
The two standard housing sizes and flexible inputs make the indicator a universal solution for all applications with increased vibrations.
Developed for large diesel engines, the indicator can be used directly on ships' engines (GL-approved models are available) and on any machine or system where high vibration resistance is required.
Ships' engines
Large engines
Pavement cutters
General road construction machinery
Turbines
Shredders
Rock crushers
Strainers
Features:
LED indicator (71 LEDs + 1 power ON)
1.5% accuracy
Display on 320° arc
Sturdy metal housing
Special design for strong vibrations
100mm or 96x96mm with changing scale
Inputs: Voltage input 0-10V
Current inputs: 0-20 / 4-20 mA
Frequency input: 0-10 Hz / 0-20kHz (PNP/NPN)
Sine wave input (e.g. for inductive sensors)
Fine tuning of +/- 10% possible
Options:
Acceptance from shipping certification agencies available on request.
|
|
|
High performance LED bargraphs in a variety of standard stackable packages are designed for use either singly or as a multiple units in applications such as instrumentation, audio equipment, level indicators and computer peripherals. Using an LED bargraph eliminates the alignment and colour matching problems associated with arrays of single LED indicators.
|
|
ALPHAPremiere 9000 Series Displays
*Tricolor, Ethernet-ready LED displays
*Built-in speakers w/volume control, ext. speaker jack
*Supports Graphics: example.
*Sound Event Notification samples (.wav) Sound1, Sound 2.
*Currently used in retail, service, factories, warehouses.
Available in 5, 5-line models:
Premiere 9080C (shown below)
80 x 32 pixels
|
|
- We have 3.5" and 5.7" TFT LCD Module for Industry application
- Display Mode: Color TFT
- Pixels: 320(RGB)x240
- White LED Backlight, Digital interface
- Outline Dimension (mm): 126.08x101.54x4.74mm ---5.7"
76.9 x 63.9x3.2mm ----3.5"
- We also have optional control board for MCU interface directly and Touch panel for your choice.
|
|
|
|
|
|
What is TFT?
Short for thin film transistor, a type of LCD flat-panel display screen, in which each pixel is controlled by from one to four transistors. The TFT technology provides the best resolution of all the flat-panel techniques, but it is also the most expensive. TFT screens are sometimes called active-matrix LCDs.
The advantages of using TFT
High Pixel Density: > 100 ppi
Scalable Resolution: from 128 x 128 dots to SXGA
Crisp colours: high colour saturation & high contrast
Excellent readablity:
due to high contrast and wide viewing andle
Portrait/Landscape support: by use of symmetric viewing cone
Multimedia capability: high speed
Applications of OLED technology
Today TFT displays are used in number of devices that require electronic display panel. Among most popular types of application are:
• Communications;
• Industrial;
• Marine;
• Consumer;
• Office equipment;
• White goods;
• Dynamique information displays;
This type of display can be used for almost any possible type of application due to versatility of its features and high level of electro-mechanical properties.
|
|
Visualization with TFT :
MICRONOR work with the largest manufacturer in visualization together. By our own designing and assambly line we can offer a total solution to you, according to your requirements. In the following overview you can see the different vizualization techniques and products.
* TFT - Small Size in the sizes of 1,5" to 2,0" in 262K or Full Color with Backlight LED and Transmissive Display mode.
* TFT - Medium Size in the sizes of 3,5" to 10,4" with Backlight LED and Transmissive Display mode.
|
|
COMPACT ELECTRONIC DISPLAY UNIT
Quick Read family is made up of three slim, compact versions, each complete with analog and digital displays, and easily programmed via local keypad.
The 3-colour (green, yellow and red) analog display and 8-digit alphanumeric display provide clear definition and easy reading of the measurement results.
|
|
|
As we have solid experience on LCD module design, we also can support you on customized LCD module per all kinds of your request (either TN, STN, FSTN module), just send us your techinical specification, let us assist you on the following.
|
|
Intrinsically safe analogue indicators - GSI / BSI series
Located in EX area
Field mounting (IP66) or panel mounting
3 1/2 and 4 1/2 digits display or bargraph
4-20 mA loop powered
Front face programming
Agreement : ATEX II 1G
Options : alarms, backlight, internal calibrator, set point station
|
|
|
|
Indicators, Displays
