|
|
For heavy load storage
It is a type of structure to optimize volumes and surfaces.
It is possible to increase by 80% the storage area be decreasing the number of aisles.
This system is used for FIFO running (First In, First Out)
|
|
The system allows you to gain space by eliminating access aisles. Available as drive in and drive through racking.
Drive in should be considered where bulk storage demands improved access, more control and more protection for the goods. |
|
The Radio Shuttle allows storage by accumulation of the pallets. It ensures the transport of the pallets until 1500 kg in-depth.
More than 25 pallets can thus be stored the ones behind the others. The lifting truck does not have to enter the shelf. A standard carriage can be used.
In addition to his price ratio/very gravitational volume, the Radio Shuttle offers multiple advantages: Safety, Speed, Optimization of volumes and the sites, management of flows...
The solution Radio Shuttle can meet the needs for organizations FIFO, FILO and be associated with a tunnel with preparation with orders. |
|
Realization all dimensions, all loads
Possibility of adapting a roof to it.
Use for long loads
Realization in hot profile allowing of the important loads.
This product gavanized hot with soaked allows stock; er of the products concrete |
|
Steel frames bleu RAL 5019. Tubular shelves are adjustable every 40mm shelves - grey RAL 7035
Maxi load 175 kg/level. Starter and extension bays from 400 to 600mm deep. Plastic top industrial carts. |
|
- Load capacity (from 550 lb to 1925 lb) and a design adapted to manual storage in most industrial and commercial sectors.
- An extremely versatile structure, to which a wide range of accessories can be added.
- A functional design that ensures it's easy to use.
- Common post for Mini-Racking and industrial shelf. |
|
| Montel shelving systems offer a wide range of accessories and practical features and can be adapted to your specific storage needs. The Aetnastak® and SmarShelf™ shelving systems are the most flexible shelving systems on the market. |
|
AUTOMATIC HANDLING STATIONS FOR STORED BOPP AND PROFESSIONAL PLASTIC FILM ROLLS
Verticalized systems for the handling of the BOPP and Plastic film rolls within specific machines and production areas.
The Bonfanti's systems are designed and produced in the respect of the ISO 9001 norms (TUV).
Main features of the handled rolls:
- Internal diameter: 3/5"
- External diameter: 1400 mm
- Width: 4500 mm
- Max weight: 4000 Kg
Storage methods:
- Multilevel ground level stalls
- Compactable industrial shelving
- Super pallet holders
Production machines connected:
- Slitters
- Tenter frame
- Washing and steaming
- Bleaching
- Printing
- Metallizing
The systems are composed by the following equipments:
- Automatic storage facility
- Dedicated automatic cranes
- Semiautomatic handling cranes
- General handling equipment
- Gripping equipment
- Loading and unloading bays
- Product weighing and code labelling stalls |
|
| Tried-and-tested for decades; continuously developed further and improved; capable of modification to customers' specific requirements - a professional fitting characterization of our long-bar storage systems. As a leading international supplier of storage systems for long-bar, we have developed three fundamental standard systems during the past 35 years. These standardized systems can be adapted to each customer's specific requirements. |
|
VERTICAL RACK FOR COILS AND REELS MAX DIA.700 MM DIAM. ART. SU.
(Special version up to dia.1000mm). |
|
Vertical cable coil storage provides a considerable saving in space compared to the traditional ground storage systems. Space utilization rations can be as high as 1 to 5 if the drums are arranged vertically up to heights of 5m, allowing on average 5 drum levels.
This system not only allows for a better use of space but has other advantages such as:
„X quick identification of the drums to be withdrawn;
„X quick withdrawal of cable lengths directly from the stored drum.
The drums are fastened to a shaft with locking cone on supports that allow the rotation of the drum and therefore high speed unwinding with our machines.
Our racks are also provided with patented safety system (quick functional operation) to prevent the drum coming out of position and this allows the operator to work safe however the drum is placed (cable top up or down).
|
|
Advantages on a view:
- for self-supporting lengthy materials: Kragarme with or without attack
- for flexible lengthy materials, on and cuts as well as bulky goods: Kragarme with horizontal steel grounds
- for ergonomically favorable supply at assembling places: Kragarme with bent steel grounds
- for ring property and standing storage: Rohrkragarme
- screwless assembly and adjustableness of Kragarmen and grounds
- high maximum stress
- high-quality surfaces
- all shelf construction units correspond to the berufsgenossenschaftlichen rules BGR 234 |
|
It is an economical system ideal for storing long items by removing the uprights on the front.
Long and medium load item storage on arms : rods,panels, etc..
It can be adapted to all types of activities. |
|
Cantilever racking is specially designed to store long items or items of varying length, such as metal beams, pipes, moulding, wooden planks, pipes, and metal and plastic sheets among other materials.
Depending on the height and weight of the merchandise, either light or heavy duty racking are available. Both can be fitted on one side of the structure only, or on both sides.
Advantages:
- Allows extra long items to be stored. |
|
The most robust system for hand loaded storage of tubes,
sections, profiles and panels etc...
- Cold profiled 15/10 galvanised frames
- 20 or 15/10 profiled steel arms adjustable every 50mm
- 1300 wide, 2100 mm high. 4 levels of arms + base. |
|
| Cantilever is mainly used for the storage of long stuff such as rolled section steel, steel tube, plates, wire lines and so on. Upright shaft is usually made of H type steel or cold rolling steel, square tube, cold rolling steel or H type steel are used to make arms. Cantilevers are assembled to upright shafts by composite type or supplier of bolts&nuts which is also for the fixation between base and uprights. Level height is adjustable. Loading and unloading of goods can be done manually or by forklifts. The height of cantilever racking is usually lower than 2500mm (the height up to 6000mm by using forklifts for loading); length of arm is shorter than 1500mm, and accordingly loading capacity is no more than 500kg per arm. Cantilever racking is mainly used in the Mechanical Manufacturing Industry and market for building materials. |
|
Improving conveying safety on company premises
The benefits for you from Mink conveying solutions:
- Inexpensive professional fitting and easy replacement
- Easy and safe conveying of sensitive articles
- Very low friction coefficients thanks to minute areas of contact
- Flexible fibres prevent scratches, dull spots and shiny spots on the surfaces
- Individualized matching of the fibres to the weight of the articles
- Noise reduction
- Easy and time-saving insertion of the components
- No contact between the parts
- Simple retrofitting of existing transport racks
- Debris falls between the fibres |
|
Drive-in racking is ideal for homogeneous products with low levels of turnover and a high number of pallets per article type. This system offers the highest use of available space in terms of both area and height.
Advantages:
- Maximum use of available space (85%).
- Elimination of aisles between the racking.
- Rigorous entrance and exit control.
- Drive-in racking can generally accommodate as many article types as there are loading aisles.
Two management systems are available: the drive-in system, with only one access aisle, and the drive-through system, with access to the load from both sides of the rack.
The system is frequently used in cold stores (refrigeration and freezing) which require maximum use of space for the storage of products in a controlled temperature.
Drive-in racking can also be used in construction of clad-rack professional buildings whose most striking feature is that they do not require the existence of a building prior to construction. |
|
| Drive-in racking is also called corridor-type racking, composite structure, specialized high-intensity drive-in brackets, high-strength drive-in beam, frames are connected to top beams by bolts manufacturers&nuts. The depth of the single side drive-in racking which is against the wall should not be more than 6 pallet locations, and that of double side drive-in should be less than 12 pallet positions so as to ensure the loading efficiency of forklifts and stability of racking. It's best to make drive-in lower than H11000mm because of its not so good stability which is the weakest compared with other racking system. The drive-in racking should be equipped with back, top cross beams, etc. to stabilize the racks. This type of racking is densely arrayed, making full use of storage space; both "first in first out" and "first in late out" are available, suitable for storing few types of goods with large quantity. Widely used in milk, drink industry, and also be welcome by cold storage. |
|
Work station with dynamic integration of shelf and system Poka Yoke
of management of assembly schedules |
|
Compactus® Electro: true simplicity in operation
The simplicity of the electronic control that powers Compactus® Electro means that convenience comes at a price competitive with wheel operated systems. A clear and simple touch panel gives you fast access to files, with a high degree of safety and operating comfort. |
|
The customized Rexroth Flow Rack System is a versatile way to supply materials and containers in a manner best-suited to your production.
The Flow Rack System can be used as a "supermarket shelf" as well as to supply containers (kanban) directly at the workstation.
You can select your optimal system from diverse suppliers of conveyor media and designs. As a result, you maximize your flexibility and efficiency.
As a supplement to all this, Rexroth also offers a comprehensive full program to supply materials for your production and at industrial workstations:
- Commissioned materials can be flexibly and easily transported from storage to the workstation via material shuttles
- Small parts are ergonomically positioned in the work area with the help of grab containers
- Large and heavy containers are positioned at optimal grab heights with a case lifter |
|
Storage space gain by removing the aisle number.
- This system is also used for FIFO running (First In, First Out)
- Productivity gain
- Easy order preparation
- Important costs saving
- Safe use.
|
|
CARENAL is a system of simple, flexible and economic construction composed of elements adapted for these applications by always seeking the practical and advantageous versions of a rational system.
Applications: dynamic storage FIFO (fixed and mobile), storerooms, work station, auxiliaries of the services industrial, service roads of assembly, various
For these applications the systems Kan Ban proved to modernize the work conditions and also to rationalize the methods of logistics.
|
|
| A dynamic "first in first out" system to aid order picking and simplify handling from cartons to pallets |
|
Flow-Through Storage Track: FIFO
First come, first served. The goods are stored moveable on rollers and will be moved to the picking point alone by means of gravity.
Simple control of dates of use
No EDP control system, the principal is self-running
Short operator distances for order picking
Space saving compared to other storage systems
The physical separation of replenishing an retrieval optimises the sequence of operations and the use of space.
Permanently high rate of restocking on the retrieval side: goods move by themselves
Buffer Storage Track: LIFO
The LIFO-principle: the last will be the first. So the goods will be picked that have been stored last. Up to six pallets, each 1000 kg, can be inserted by means of forklifts. As normally a seperation and breaking is not necessary it is cheaper than flow-through tracks.
The advantage of the LIFO-principle is the optimal use of the space.The filling point is as well the picking point. So the shelf modules can be mounted with its back to a wall.
Upon request we supply the track incl. frame! |
|
|
|
"Open" storage: Shelving
