Fire suppression systems

99 companies | 515 products
Filters
  • What’s new?
    Submit

For extra convenience, these mixers of small capacity can...

The monitors in this series are built according to standard specifications and are delivered in three different sizes. Note that the monitors are supplied...

This self-oscillating monitor is available in two sizes and provides horizontal xx plane movement. In addition to its water self-oscillating system, it offers...

The monitors are built in different sizes with capacities of 4.000 and 7.000 lpm each. They also have two electric motors...

The monitor comes in two capacities of 4.000 and 7.000 lpm. The monitors are fit with two hydraulic motors that delivers movement...

{{productDetail[5289]}}

The FLIR K-Series is widely known for the thermal imaging cameras intended for fire fighting operations. To continue, this top of the line device is very essential...

{{productDetail[7945]}}

BETE TFXP fire protection and evaporative cooling nozzle provides the Largest free passage in the original spiral nozzle invented by...

This one of a kind and highly efficient low flow and fire protection nozzle is a quality three-piece construction. This state of the art nozzle has distinct...

This nozzle is a one-piece construction, has a male connection, is very durable and is clog resistant. 3/8"...

N Fire Protection Spiral Spray Nozzle features a simple design
(one-piece and no internal parts), good clog-resistance and comes in
three standard pipe sizes ½", 1" and 1½" with male connection...

This two-tone spiral nozzle is a heavy one-piece construction with...

{{productDetail[7149]}}

Standard and Premium Fire Protection Sleeves are supported by the hose protection range offering high performance flexible protection cover for cables, hydraulic leads and rubber...

{{productDetail[16008]}}

The MEN Overhung, End Suction Industrial Process Pump is a heavy-duty tool...

{{productDetail[6194]}}

The PYRO WAS RT is a fire-service folding hose. It has special features such...

{{productDetail[14764]}}

Cummins has known that each second counts in engine applications ever since they first produced a fire pump drive in 1954. A new line of fire pump drivers has now been launched via Cummins...

{{productDetail[28678]}}

Etanorm FXV is a pump designed with adjustable shaft protecting sleeves and casing...

{{productDetail[7053]}}

The KSB AG Wastewater Pump features a sprinkler design to ensure VdS and fire protection. It is...

{{productDetail[13341]}}

The DIAS fire detection surveillance systems of the PYROVIEW 380L and 640 L/PYROSOFT FDS series are a perfect choice for quick fire recognition inside bunkers or free air dumps of waste...

{{productDetail[35299]}}

Dry powder fire extinguishers are suitable for mixed fire risk environments and are especially suitable for flammable liquids and fires involving flammable gasses such as methane, propane, hydrogen, natural gas etc. Multi-purpose powder extinguisher interferes with the combustion process and provides rapid-fire knock down.

The range offers...

The original market leading design.

Truck or wall mounting
For 6 kg fire extinguishers
Automotive grade rubber...

Designed primarily for a 5 kg CO2 extinguisher with a large nozzle
Automotive...

For wall mounting only
Not for use on commercial vehicles
For in-door/out-door storage of 6 kg...

Truck or wall mounting
For 6 kg fire extinguishers
Neoprene...

{{productDetail[31893]}}

AFW Lufttechnik GmbH FW presents a single fire brigade extractor. An exhaust hose hanging from the ceiling is fastened to the exhaust pipe with the help of an exhaust grommet and clamping...

The FW extraction system is an effective extraction unit mounted on the top of the fire brigade automobiles. On the extractor front side a pneumatic coupling is fixed to the exhaust pipe that makes it 100 % vacuum sealed....

The Magna Track Basic is an element extraction framework mounted on a runner for flame detachment vehicles. The extractor in the runner goes with the vehicle when it drives out, discharging itself consequently from the vehicle at the entryway...

{{productDetail[65992]}}
{{productDetail[64222]}}

Applications and installation
The SCM2 series are with two back-to-back impellers centrifugal pumps, are developed for higher head valve than single impeller pumps and have extremely high outputs. They are suitable for pumping clean water and chemically non-aggressive liquid, reliable,...

{{productDetail[126201]}}

The 3600 from Hannay Reels has a special design that can endure fire. The device is equipped with an aluminum stainless steel, supplied with spring...

The 3100 Series Reel of the Hannay Reels® is used for industrial fire protection which can handle hose sizes ranging from 3/4" I.D. through 1-1/2" I.D. It is normally...

1½" Manual or Power Rewind Reels are strong and heavy reels that feature a gear-driven crank rewind or chain and sprocket drive that is powered by an electric, hydraulic, or compressed air motor....

The Hannay 3600 series is a reel made for industrial fire protection. This steel reel can accommodate a modular inlet of 1-1/2"...

Hannay's 3600 Series Reel Housing Structure has been made out of steel materials, with aluminum or stainless steel-material constructions available upon request. This enables the unit to deliver industrial fire...

{{productDetail[7341]}}

Depending on the pressure requirements, a number of stages are available with these vertical fire pumps. They come with features such as enclosed impellers, column lengths according to the application, single-suction technology, standard open line...

HORIZONTAL FIRE PUMPS

CHARACTERISTICS
• Single stage double suction impeller.
• Split case design allows to give service without disturbing the piping.
• Dynamically Balanced Double Suction Impeller to reduce thrust loads.
• Clockwise or counter-clockwise rotation viewed from coupling side are available.
• Grease lubricated...

PRE PACKAGED FIRE PUMP SKIDS

CHARECTARISTICS
- Electrical motor or diesel engine.
- Main & Jockey pumps and controller mounted on a common base.
- Complete equipment compatibility.
- Reduce the field cost installation.
- Interconnection...

The LVZ pump is a radially split single entry volutecasing centrifugal pump, mainly used in floating docks and also as a fire protection...

{{productDetail[38190]}}

Rupture discs and Safety valves may be used independently as primary safety devices or in conjunction.
Flame arresters...

{{productDetail[23181]}}

Fire blankets
STANDARD :
BS EN 1869
USE :
The fire blanket is useful for the protection of the men and the material. It must always be...

{{productDetail[8308]}}

FM Approved horizontal split-case type centrifugal fire pumps are relatively...

The Turbine Type VAB, manufactured by Gruppo Aturia, is a vertical shaft centrifugal fire pump, suitable for extensive industrial and municipal applications. This device...

{{productDetail[62026]}}

DESMI has an extensive product range of mobile and stationary diesel-driven pump units.

These pump units are made to comply with the demands of the marine industry as regards materials, design, and ease of handling.

All DESMIs mobile pumps are in compliance with the...

{{productDetail[21088]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation