Structural protection: Bearings, Posts, Protective systems

The structure has been designed for the most effective column protection. Guard profiles and columns are isolated from the guarding element to maximally isolate and absorb impact forces. The product is fully modular. The design also allows ...

This structure has been designed to provide integrated protection for columns and posts at any height. This product is being perfectly adapted to any element it protects. It is perfect for any place where protection installation opportunities ...

This structure has been designed to provide integrated protection for columns and posts at any height. This product is being perfectly adapted to any element it protects. It is perfect for any place where protection installation opportunities ...

Specially developed for protection of both the belt and the object to be fixed. Properties •Suitable for band 50 and 75 mm width. •Cast from one piece. •Good guidance lashing. •Protection of the product by special shape (pressure ...

Column Sentry is the original column protector that minimizes the force of forklift damage to columns, surrounding supports, vehicles, and operators. Surrounds columns with a cushion of air by way of Sentry’s exclusive air chamber. On ...

Park Sentry® is the original minimal footprint bump-n-go column protector designed to reduce or eliminate column and vehicle damage that often occurs in the close confines of parking structures. Made of ARPRO® the same high performance ...

The Column Sentry FIT is a revolutionary column protector that addresses the challenge of variable column sizes. The product features four interlocking sides that slide into place to create a flexible, impact absorbing column protector ...

BERNAD’s range of double light guardrails is designed for installation in transfer areas, where the weight of the goods is not excessively high and the goods are moved by hand pallet truck or electric stacker. The best solution to protect ...

"Rubber-metal-buffers, with male thread (one-sided) NK 55 +/-5 Shore A from M4 up to M16"

"Rubber-metal-buffers, with male thread (both-sided) NK 55 +/-5 Shore A"

"Rubber-metal-buffers, with male and female thread NK 55 +/-5 Shore A"

Load capacity: 8 N - 27 N
Stroke: 25 mm
Thread length: 101 mm

PRODUCT INFO In order to save costs, factories typically use solid buffers such as polyurethane and rubber. However, these can result in noise and transient impacts. Choosing the right shock absorber can reduce impact vibrations and ...

Load capacity: 70 N - 160 N
Stroke: 75, 50, 25 mm
Thread length: 98.5, 151, 124.5 mm

PRODUCT INFO. In order to save costs, factories typically use solid buffers such as polyurethane and rubber. However, these can result in noise and transient impacts. Choosing the right shock absorber can reduce impact vibrations ...

Load capacity: 8 N - 27 N
Stroke: 25 mm
Thread length: 95 mm

PRODUCT INFORMATION: To save costs, factories typically use solid buffers such as polyurethane and rubber. However, these can result in noise and transient impacts. Choosing the right shock absorber can reduce impact vibrations and ...

Load capacity: 10 kN - 850 kN
Stroke: 10 mm - 3,000 mm
Diameter: 25 mm - 110 mm

Description of shock absorber, hydraulic buffer, hydraulic shock absorbers: The hydraulic industrial shock absorber of the C-series (COMPENSER®) is the ideal hydraulic buffer for storage and retrieval machines or smaller conveyor systems, ...

Load capacity: 10 kN - 2,000 kN
Stroke: 10 mm - 3,000 mm
Diameter: 55 mm - 200 mm

Description of hydraulic shock absorbers, buffer, gas-pressure shock absorber: The preferred field of application for the (gas) hydraulic industrial buffer (COMPENSER®) of the S-series is in the medium to heavy engineering industry ...

Load capacity: 10 kN - 160 kN
Stroke: 10 mm - 2,000 mm
Diameter: 32 mm - 110 mm

Description of buffer spring, hydraulic shock absorbers, gas-pressure shock absorber: The COMPENSER® of the DC-series is an ideal hydraulic shock reducing element especially for the application field of storage technology (storage ...

The A101 shock absorbers protect against impacts with sharp corners and are fixed in place using adhesive. Minimum 50 % external pre-consumer recycled content. Plus points Optimum impact absorption Easy to install Minimum 50 % ...

M.M provides handrail systems constructed with pultruded profiles in isophthalic polyester resin and fibreglass. The handrails, supplied with vertical and horizontal attachment, are designed and manufactured to ensure maximum safety in ...

BUFFER WITH PIN D = to attach the buffer it is necessary to carry out the borehole 0,1 - 0,2mm larger. Chamfer the hole General measuring tolerances (DIN ISO 3302, section 2 M2F) All Measurements in millimeters (mm) EB = EPDM, black

BUFFER WITH PIN D = to attach the buffer it is necessary to carry out the borehole 0,1 - 0,2mm larger. Chamfer the hole General measuring tolerances (DIN ISO 3302, section 2 M2F) All Measurements in millimeters (mm) EB = EPDM, black

BUFFER WITH PIN D = to attach the buffer it is necessary to carry out the borehole 0,1 - 0,2mm larger. Chamfer the hole General measuring tolerances (DIN ISO 3302, section 2 M2F) All Measurements in millimeters (mm) EB = EPDM, black

Load capacity: 50 N - 70,000 N

In our vibration dampers of the GDZ-( )-1 series two all-metal cushions are installed. Depending on the assembly, these cushions can be loaded with pressure or tension. These elements are available in a load range from 60 – 7.000 kg with ...

Load capacity: 500 N - 80,000 N

In our vibration dampers of the GDZ-( )-5 series two all-metal-cushions are installed. Depending on the assembly, these cushions can be loaded with pressure or tension. These elements are available in a load range from 250 – 8.000 kg. ...

Load capacity: 500 N - 70,000 N

In our vibration dampers of the GDZ-( )-1 series three all-metal cushions are installed. Depending on the assembly, these cushions can be loaded with pressure or tension. Due to a third cushion it is possible to handle and damp axial ...

KINTO presents shock absorbers at excellent quality and economical price. They provide a range of shock absorbers (oil damper) for shock reduction. Specifically these are used during initiation process in operating functions of vacuum ...

Tripod made of tubular steel, collapsible, with lockable lantern holder. For hanging in barrier boards of bars, 1 m high.Weatherproof painted finish in statutory red and white.Weight approx. 4 kg

Height: 1 m

Made of tubular steel with ring-Type foot and 3 lifting eyes, 1 m high, weatherproof painted finish in statutory red-and-white.

Made of round steel Ø 14 and Ø 16 mm, with double hook suitable for barrier rails, bars, boards and lines. Weatherproof painted finish in statutory red. Weight approx. 1.5 kg

Hidracar oleo-pneumatic shock absorbers / linear decelerators decelerate masses in reciprocating, linear, circular and other movements. They also work as shock absorbers of weights in free fall, as suspension of vehicles and wagons, for ...

Glass protective partition: Our glass partitions allow the safety of passengers, delimit spaces while allowing the circulation of a maximum of light. Our glass partitions are installed in railway stations, metros, airports, etc.

Our engineers and technicians design, manufacture and install Lead wall protection for radiation therapy rooms and Nuclear Medicine installations worldwide. Whatever the size, the weight or the location, our DIB team do their absolute ...

One of the HSE recommendations in reducing risk taken by people working on a roof is to select and use the right rooftop safety equipment. For contractors and engineers accessing flat roofs to carry out essential building, repair and ...

KeeGuard® Topfix provides a simple solution when collective protection is the preferred safety option for metal profile and standing seam roofs up to 45 degree pitch. The specially designed powder coated base plate, which incorporates ...

KEEGUARD PREMIUM offers a new and innovative approach to freestanding, non-penetrative roof top railing systems. The unique base weights eliminate the need for off-set counterweights, with only ‘Open ended’ systems utilising returns at ...

Load capacity: 20 N - 4,500 N
Stroke: 16 mm

The DAMPTAC DTK series is widely used in the automotive industry, the automation industry, etc., which allow the mobile load to decelerate smoothly until stopped, without bounce, and reliability is fully validated. Simply adjust the knob, ...

Stroke: 25 mm - 1,000 mm

DAMPTAC Liquid Diesel DTH Series uses the German leading liquid gas cushioning technology, in the impact of hydraulic oil and nitrogen through the synergistic effect of absorbing impact energy. When the buffer, the hydraulic oil flows ...

Stroke: 7 mm - 50 mm

The DAMPTAC DTK series is widely used in the automotive industry, the automation industry, etc., which allow the mobile load to decelerate smoothly until stopped, without bounce, and reliability is fully validated. Simply adjust the knob, ...

BUFFER STOPS FOR TRACK AND RAILWAY SYSTEMS About the product Easy assembling and alignment Self centering For all types of common rails As dynamic bumper with integrated buffer As static end stop bumper Features Buffer stops ...

IMPACT BUFFER TYPE ZKSP About the product Impact buffers. End-stop solution. Version with central mounting Version with base plate (made of aluminum, plastic or steel) Impact buffer made of foamed polyurethane on a MDI-/ polyester-basis Excellent ...

TYPE SWD ROPE ROCKER DAMPER About the product SWD – Rope Rocker Damper. Immediate force transmission in case of rope failure. Integration into a rope rocker system Especially suitable for nuclear power plant cranes (KTA) Integrated ...