|
|
Series 46J, 46D, 47J, 47D, 48D Solid Carbide Tip End Mill
45 Degree Helix, Center Cutting, High Precision, Grade IN2005
Diameters:
.312" and .625"
Cutting Edge Length:
.20" and .47"
Cutting Edge Radius:
Sharp, .015", .030", and .060"
|
|
Ball and two flute end mills
Short series / Long series
- Reinforced helical teeth
- Straight shank and drive flat
|
|
ISCAR has a wide range of ball nose end mills.
Solid carbide cutters are available for the smaller diameter ranges.
Standard carbide inserts with indexable cutting tools begin at 8 mm (.315") and extend up to 50 mm (2.0").
Considerably larger sizes are available for special custom made orders.
FLEXFIT, a modular system, enables assembling a ball nose end mill to any of a variety of lengths, depending upon the application. This is an ideal solution for the die and mold industry.
Also available are end mills with round inserts for large sculptured surfaces and round corners.
|
|
RobbJack’s OneStep™ series of ball end mills are designed for roughing and finishing of 3-D Die/Mold cavities. These will allow you to run at faster speeds and feeds to increase part output and improve accuracy while reducing costs.
Features
# 2 Flute “Tuffy” Grade, Extended Length Ball End Mill
# Application Specific Geometries and Coatings
# Recommended for High Speed, Hard Metal, Milling Applications
|
|
|
DIXI Polytool has a wide range of standard end mills, ball nose end mills, end mills with corner radius, chamfering tools and end mills for composites. The ranges of Ø start at 0.05mm.
|
|
When your non-ferrous application requires contour or
3-D work, the ARF-BN series is the tool of choice. We
combine the proven geometries of our ARF series with a
precision ground full ball radius. The higher helix and
clearance angles provide a freer cutting ball with
advanced shearing properties. Stub and regular flute
lengths with material specific coatings are all in stock.
|
|
Corner Rounding End Mills
FAST BREAK Series 15R1V and 15R4H
TOP ON mini_15r4h_topon
FAST BREAK PAKS Series 15R1V and 15R4H
|
|
Features
Ideal surface finishes achieved by using precision geometry and a superior coating technology.
High Precision
Tolerance combination. The highest radial tolerance (±2micro meter), diameter tolerance (0--10micro meter), and a shank tolerance of h5. Ideal for finishing with a sharp cutting edge and seamless edge geometry.
|
|
V400 Finishing Ball Nose End Mills
The V400 finishing ball nose end mill brings greater accuracy and size control to contour milling. Ultra-precision ground inserts in a new, highly versatile PVD coated grade, VP5007, result in superior finishes and greater accuracy on a wide range of materials. Advanced insert technology combined with advanced cutter design makes the ValMILL 400 a superior performer in the die and mold industry, and a reliable producer wherever high quality machining is needed.
|
|
|
|
|
|
WELDON 2AR-BN:
Our 2AR-BN is designed for roughing non-ferrous materials where the application demands a high metal removal rate.
We have combined a high-shear, 40 degree helix with a cylindrical margin for chatter resistant, smooth machining in all non-ferrous materials.
The 2AR-BN is available from stock as a bright tool or with Zirconium Nitride (ZrN) and Titanium Carbonitride (TiCN) coatings for improved performance and extended tool life. Special quotes and non-stocked coatings are available upon request.
WELDON 4SR-BN:
Our 4SR-BN tools have the same full eccentric primary grind, and 40 degree flute helix as our 3SR series. We have added a fourth flute to this proven design to provide up to a 30%+ increase in metal removal rates for those operations that demand higher levels of productivity in steel and ferrous alloy roughing.
Our 4SR-BN is stocked with Aluminum Titanium Nitride (AlTiN) and Titanium Carbonitride (TiCN) coatings in stub and standard lengths. Special quotes and non-stocked coatings are available upon request.
|
|
Gigant-ic
The thread milling cutters of our new series Gigant-ic were developed with the intention to increase economic efficiency in the production of large and deep threads on modern CNC machines. The Gigant-ic programme is made in four different size variations, in order to achieve the best possible stability for the tools and with it trouble-free thread production. This aim is achieved thanks to a modular system which allows a perfect choice from different diameters and length types.
Advantages:
* Internal coolant supply
* High process safety
* No rejects due to miscut threads
* Blind hole threads can be cut down to the hole bottom
* High positioning precision
* Low cutting forces
* One tool for all materials
|
|
|
V-Carb End Mills designed with unique 5-flute geometry reduces harmonics that improve finishes...allows heavier stock removal...can run at higher production rates...suitable for a variety of materials up to 45Rc
|
|
Workpiece requirements call for ever better tool surfaces. Walter Prototyp finishing cutters have special geometries that satisfy this demand. Our geometry prevents chatter marks and produces smooth milling characteristics.
The product range includes tools with different cutting edge lengths and helix angles
N60 – finishing cutter with 60° helix angle
High-twist solid carbide shank cutter for the purest finish
60° helix angle produces a soft cutting action and achieves the best surface finish on the workpiece
Good removal of chips due to the high helix angle, thereby preventing scratching of the machined surface on the component
N45 - finishing cutter with 45° helix angle
Tool specifically for the machining of ISO material groups P, M, and K
Stable and smooth machining of the workpiece due to the all-new microgeometry on the cutting edge, thereby eliminating vibrations.
High-quality TiAlN coating for maximum tool life
|
|
|
|
|
|
WELDON 3AF Finisher:
The 3AF is intended for finishing operations in aluminum and non-ferrous materials. These tools have a high shear 40 degree helix and come standard with a cylindrical margin to provide chatter resistant machining and superior finishes in all non-ferrous materials. Although intended for finishing, the 3AF has also proven itself in lighter roughing applications.
In addition to square end tools, we provide a broad radius program for our 3AF series.
The 3AF is available from stock as a bright tool or with Zirconium Nitride (ZrN) and Titanium Carbonitride (TiCN) coatings for improved performance and extended tool life. Special quotes and non-stocked coatings are available upon request.
WELDON 5SF Finisher:
We round out our Weldon Premium Carbide offering with the 5SF. This tool is intended for finishing operations, though it can also handle medium to light peripheral roughing, in steel and ferrous alloys. A full eccentric primary grind, sharp corners, a 40 degree helix to ensure proper chip evacuation and an odd number of flutes to reduce unwanted harmonics come together in our 5SF to deliver superior finishes in ferrous materials. The 5SF should be your first choice in premium carbide for finishing and medium to light peripheral roughing for steel and ferrous applications.
Our 5SF square end tools are complemented by a broad radius program.
Aluminum Titanium Nitride (AlTiN) and Titanium Carbonitride (TiCN) tools are available from stock in stub, standard, long and extra long lengths. Special quotes and non-stocked coatings are available upon request.
|
|
A comprehensive programme of Solid Carbide 2, 3 and 4-Flute Milling Cutters available with a wide variety of surface treatments for increased productivity and tool life:
- Miniature End Mills
- End Mills - Single Flute
- Slot Drills
- End Mills
- Roughing End Mills
- Corner Radius End Mills
- Ball-Nosed Slot Drills
- Ball-Nosed End Mills
- Multi-Application End Mills
- Milling Cutters for Aluminium
- Milling Cutters for Stainless Steel
- Unequal Helix End Mills
- Unequal Helix Roughing Cutters
|
|
A Complete Line of Products, Full of Systematic Advantages
Here is the best argument straight away for Pokolm-Voha solid carbide end mills: We use our own end mills to produce a large share of our milling cutter bodies and arbors -and for good reason. Our solide carbide end mills are famous for their precise concentricity, plus they are suitable for shrinking processes, and have a full range of advantages in high-speed and extreme milling operations.
We use specially selected materials and have suppliers and coating partners who are integrated in our development and production process. This creates the most favorable environment for our highly specialized staff to produce first-claas, high-quality end mills using the latest high-teh grinding machines.
|
|
|
|
|
|
MultiVario - the upper class concerning chip production
The MultiVario-Cutter is the result of the progress made before concerning HW (HM) and HS (HSS) milling tools. The aim of the development was, above all in the field of the chip production of XPS material (extruded Polystyrol), to design a milling tool that is able to achieve moreover best surface qualities under high production conditions.
It appeared rather directly that in depend-ence of the diameter generally not more than 24 knife-edges could be arranged on account of the to some extent existing complicated tongue and groove forms.
Besides the cutting material did set a limit to the further development of the shaping of
the cutting edges so that it certainly succeeded in improvements but still having been not quite sufficient to declare it a pioneer development.
This is why we applied new methods and developed a milling tool with respect to quality and versatility that can be made suitable for your material to being pro-cessed. You won%u2019t find a second one of this construction!
Perfect surface quality of economical highest standard - this is the characteristic line in favour of which you may decide the acquisition of the MultiVario-Cutter.
The result shows a clearly increased profit with regard to:
- operating safety
-handling and control of the tool
- efficiency by higher chip production
and unparalleled product quality
|
|
TXP & EXP
• Highly economic design with 3 cutting edges
• New chipbreaker geometries for optimum performance
• Stable double clamping system of the insert
• All EXP milling cutter with inner coolant
• Extremely quiet running at large cutting depths
• Feed rate up to 3 mm/tooth for maximal productivity in roughing operations
High-efficiency in engraving operations
Super "Quick motion" milling cutter
Feed rate up to 3 mm/tooth
- MH, - ML chipbreaker
T1015 grade for cast iron
|
|
Cutting tools
End mills with straight shank carbide
2 flute end mills 2D QC SN
Commercial name : 2 Flute end mills
Specification : 2D QC SN
Diameter : 4
Type : Carbide
Knuckle : YES
Cutting tools
End mills with straight shank carbide
2 flute end mills 2D QC SN ALU
Commercial name : 2 Flute end mills
Specification : 2D QC SN ALU
Diameter : 4
Type : Carbide
Knuckle : YES
|
|
|
These dynamically balanced tools provide an exceptional surface to insure part rigidity in MDF, LDF, and Balsa core spoilboard material. In addition to spoilboard finishing, the radius edged cutters in carbide tipped and insert style can be used to plane to size, slot, and bottom finish in a variety of flat sheet plastic and aluminum. Regardless of the application, the entire process is accomplished with maximum productivity and outstanding finish quality.
|
|
We carry burs in all shapes and sizes. We can also customize any bur to your needs.
- Solid Carbide Bur
- Brazed Burs (Solid Carbide Head with brazed steel shank)
- Long Series - Brazed Burs (Solid Carbide Head with brazed steel shank)
|
|
carbide rotary burr
3210V Standart - cut cross - tooth cylinder
3211V Double-cut cross - tooth ball - nose cylinder
3212V Double-cut cross - tooth end - nose cylinder
3213V Cross-tooth ball - shape nose cylinder
3214V Cross-tooth oval nose cylinder
3215V Cross-tooth round-nose tree nose cylinder
3216V Cross-tooth round-nose tree nose cylinder
3217V Cross-tooth round-nose tree nose cylinder
3218V Cross-tooth round-nose taper nose cylinder
BOX : 5 pc carbide burr kit
|
|
Dormer’s range of Solid Carbide Thread Milling Cutters has expanded rapidly over recent years to meet the growing demand for tools with the ability to exploit the potential of modern CNC machines and produce high quality, accurate threads.
Offering impressive tooling economy and high levels of tool life, the current programme covers Metric, Metric Fine, UNC, UNF, G (BSP), NPT and NPTF thread forms, meaning that Dormer can now offer a thread milling cutter for almost any application.
|
|
WhizCut will change the way thread mills are used today by introducing the new WhizThrill. The WhizThrill deburring thread mills take thread milling to the next level. Users of thread taps and thread mills have for years been battling problems of getting burrs when threading holes. This has resulted in an extra operation where a deburring tool has to be used resulting in increased production time and cost. A WhizThrill together with the WhizCut software does all of this in one single move giving a perfect result.
WhizThills are produced with the best carbide and coating combination to be in forefront of technology both when it comes to tool design and material. We also offer a wide range of micro thread mills with extra tool strength.
|
|
AccuThread
Thread Milling Cutters, Inserts and Holders
Features and Benefits
AMEC's proprietary AM210® coating has a 25-50% increase in tool life over the competition.
AccuThread 856® solid carbide threadmills have a thicker core and helical flute which offers increased strength and rigidity when cutting forces are applied.
AccuThread 856® standard cutting lengths allow for multiple applications without the need for special threadmills.
AccuPort 432 specific threadmills stocked.
AMEC's Indexable Threadmill Holders are made from a stainless steel that is engineered to dampen vibration during operation.
The AccuThread 856® Indexable line of Threadmills offer three insert length and a wide range of thread forms.
The AccuThread 856® Indexable Threadmilling Holders are offered in multiple flute configurations and feature a bolt-in type and a patented pin style locking system, which ensures unsurpassed repeatability.
|
|
ThreadMill:
Solid carbide and indexable threadmilling gives a superior quality thread while providing substantial cost savings.
|
|
|
|
Milling tools
