|
|
F-Tool swivel block 56 and WEDM vise V 0-75 mm
Made of corrosion-resistant, hardened stainless steel. Vise delivered with clamping jaws for the stress area of 0-75 mm.
Hole pattern appropriate to electrode holders with hole distance for M6 distance 40 mm.
|
|
The world's most widely used
electrode holder system is still the Mini system. The extensive product program ensures rapid and exact mounting of the electrode holders in hydraulic quick-change chucks.
The Mini system is a "Reverse Reference System", in which the chuck adapts itself to the electrode holder, which is why all electrode holders must be exactly alike – in diameter, roundness, straightness and hardness – to meet the accuracy requirements.
This high change accuracy is achieved thanks to the two annular chambers of the hydraulic system, which expand uniformly and provide symmetrical locking against the fixed Z reference with angular location.
Facts
- Repetition accuracy: 0.002 mm
- Max flushing pressure: 75 bar
- Clamping force: 4 000 N
|
|
BT 40 Extended Length Shrink Fit Tool Holders
BT 40 Standard Length Shrink Fit Tool Holders
BT 50 Extended Length Shrink Fit Tool Holders
BT 50 Standard Length Shrink Fit Tool Holders
V 40 ANSI Style Metric Standard Length Shrink Fit Tool Holders
V 40 ANSI Style Extended Length Shrink Fit Tool Holders
V 40 ANSI Style Standard Length Shrink Fit Tool Holders
V 50 ANSI Style Extended Length Shrink Fit Tool Holders
V 50 ANSI Style Extra Extended Length Shrink Fit Tool Holders
V 50 ANSI Style Metric Standard Length Shrink Fit Tool Holders
V 50 ANSI Style Standard Length Shrink Fit Tool Holders
|
|
Maximum clamping forces with slim designTHERMOGRIP®
In order to achieve maximum clamping forces with a slim chuck design and maximum speeds, the THERMOGRIP® shrink-fit technology is also used in addition to conventional mechanical clamping techniques.
Your PLUS:
- Fast fitting and removal
- Maximum clamping forces possible
- Increased tool and spindle service life
- Good surface quality due to the high rigidity of the tool clamping
- Good bending and radial rigidity even with large projection lengths
- Clamping of HM and HSS tools with shank tolerance h6, < Ø 6 h5 to DIN 6335 and DIN 1835 possible with the same clamping chucks
- Due to the use of heat-resistant special steel and a special tempering process, the clamping chucks have a particularly high service life and dimensional stability
- Chuck concentricity 3 µm
- For use at the highest speeds
|
|
Shrink fit toolholders provide concentric clamping force of 10,000 lbs or more directly on the tool shank. This translates to TIR as low as 0.0" to 0.0002". Ideal for high speed or high torque machining applications. Shrink fit toolholders are balanced to 15,000 RPM at G2.5 for high speed performance. Balancing to higher speed is available as well.
|
|
|
Equipment and service make the difference in successfull work. IMT provides a complete periphery of products including coolant units, supply harnesses, frequency converters, and accessories. As a dependable partner, IMT will actively help to ensure permanent success in your operations.
|
|
* Hydromechanical system for index and locking functions
* Low maintenance
* Simple control system
* High speed indexing
* For high-volume production
|
|
Indexing Turrets
Clamping on HIRTH face tooth coupling, high stiffness and accuracy.
Integral drive train.
Accepts range of servo motors.
Coolant delivery system.
12 month warranty.
|
|
Because of their different design, large boring heads do not include Accu-set, Safety-set, or Speed-Set capability.
Two differents types:
- Direct Mount Large Boring Heads
- Adapter Mount Large Boring Heads
|
|
Coromant Capto©
Coromant Capto© is the best option for standardization across all machines in the workshop. And unlike other tooling systems, its original design will make sure it is the first choice for many years to come.
We have more than 5,000 Coromant Capto standard products in the application areas:
- Multi-task machining
- Turning centres
- Machining centres
|
|
MODULHARD'
MHD' is a high precision modular system for every operation of boring, milling, drilling and tapping.
Rigidity and concentricity, precision and flexibility
are guaranteed by the coupling system, eight available sizes, by the interchangeability of all the components and by the sensitivity adjustment of the finishing Testarossa heads (2µm).
MHD’ modular system includes:
arbors in accordance with DIN- ISO- HSK- BT standards extensions and reducers adaptors: Weldon/Whistle-Notch holders, milling cutter holders, tapping chucks, morse taper holders, coolant chucking tools and semifinished toolholders for special applications.
Roughing double-bit boring bars heads provide a working range between 18 and 800 mm diameter.
Finishing TRM Testarossa heads and micrometric boring bars for bores of 2.5 to 800 mm diameter.
Balanceable TRM heads and balancing rings for high speed machining up to 20,000 rpm.
|
|
Worldstandard DIN 69893
Wide range of toolholders and extension
High precision of centering
Flexible to use
Economical
HSK 32/40/50/63/100
|
|
|
|
|
|
Coromant Capto© is the best option for standardization across all machines in the workshop. And unlike other tooling systems, its original design will make sure it is the first choice for many years to come.
Sandvik Coromant offers a wide choice of basic holders with an integrated Coromant Capto in the front end.
Two different clamping methods are available, centre bolt clamping and front clamping. By using Coromant Capto basic holders in combination with extensions and reductions you will achieve tremendous flexibility and substantial reduction of your inventory.
Solid holding tools are an important complement to modular tools, when for technical or functional reasons, modular solutions are either not suitable or unnecessary.
To complement existing basic holders an assortment of solid HSK holders are also available.
Modern machines and tools have greater demands on tool holders. Particulary if cemented carbide endmills and drills are used at very high speed, where a very low run-out is required to achieve long toollife.
CoroGrip® and HydroGrip® fulfil all the demands on a tool holder for HSM.
Three requirements have to be fulfilled when using holders with cemented carbide endmills or drills at high speed:
-Low run-out
-High clamping force
-Balanced holder
Every CoroGrip and HydroGrip chuck is individually balanced and they have an individual number and is delivered with a protocol.
Tools with long overhangs are becoming increasingly more common, especially on machining centres where many operations are often performed on one machine. Vibration, an inherent feature of long tool overhang, is proving to be effectively reduced with damped tooling.
Sandvik Coromant has, since many years, the exclusive right to market and sell these "problem solving" tools. Our partner Teeness has over 30 years experience and competence in the design and manufacture of standard and special solutions.
|
|
Slim-Fit Modular Tool Holding System
Slim-Fit provides the reach and accuracy you need, PLUS the ability to change tools easily.
Slim-Fit combines the best features of collet chucks, (fast tool changes and fits a variety of shank sizes) with unmatched rigidity, accuracy, and balance. All in one system.
• Interchangeable collets for fast tool changes
• Slim design fits in tight spaces
• T.I.R. only 0.0002"
• Balanced to 18,000 RPM @ G2.5
|
|
Tooling system GM 300
Tool holders, clamping systems and accessories to ISO 12164, DIN 69893 and DIN 69871 for transfer lines, machining and turning centres
Flexible tooling system GE 100
a tooling system for the combined machining
operations facing, chamfering, boring, centering etc.
ISO indexable inserts, short clamping
holders and KV 400 cartridges
|
|
Slim-Fit provides the reach and accuracy you need, PLUS the ability to change tools easily.
Slim-Fit combines the best features of collet chucks, (fast tool changes and fits a variety of shank sizes) with unmatched rigidity, accuracy, and balance. All in one system.
- Interchangeable collets for fast tool changes
- Slim design fits in tight spaces
- T.I.R. only 0.0002"
- Balanced to 18,000 RPM @ G2.5
|
|
As a result of partnership agreements built up with Sandvik Coromant over the last 20 years, Craftsman Tools manufactures Craftsman Capto™ quick change toolholders for many leading machine tools, including those of Mori Seiki, Okuma, Haas, Doosan, and Mazak.
CRAFTSMAN CAPTO™
• Shortest downtime due to reduced time for set-ups
• Reduced machining times due to greater stability
• Universal modular quick change tooling system
For further information, please contact your local Sandvik Coromant representative.
|
|
As a result of partnership agreements built up over the last 20 years, Chevin Tools supplies Sandvik's Coromant Capto® quick change toolholders for many leading machine tools, including those of Mori Seiki, Okuma, Haas, Doosan, and Mazak.
COROMANT CAPTO®
- Shortest downtime due to reduced time for set-ups.
- Reduced machining times due to greater stability.
- Universal modular quick change tooling system
|
|
|
|
|
|
Quick Mould Change - Achieving gains in time and productivity.
Designed for flexible integration into your processes, our magnetic, bayonet or hydraulic flanging systems, which are designed to meet your technical priorities (type of press, set of moulds), your logistical requirements (mould change frequencies) and your economic requirements, help to guarantee the best results in terms of productivity.
QMC 122: Permanent electro magnetic clamping of moulds for Injection Moulding Machines.
High performance magnetic clamping with IMAG technology
* Active safety powered by Stäubli
- Technology actively secures your clamping operation
- Guide the operator through an interactive safety points check list prior clamping/unclamping operation
- Calculate and compare the clamping force with the machine oncesDetect any drops from the original clamping force registred
* Permanent monitoring of the mould while in operation
- Revolutionary mould movement detection system
- Temperature overrun alarm.
More information on our website.
|
|
Magnetic die clamping for stamping presses.
Quad Stamp is easy to install: using bolts to mount magnetic plates to existing T-slots or tapped holes.
Its modularity allows adaptability for any need.
No modifications to the press are required. Quad Stamp is made to
fit your press.
The new reduced thickness of the modules allows to save daylight.
Bigger dies can be used in smaller presses.
One operator, with no tools, can operate all the die-clamping
easily and in total safety, while staying outside the press.
Load the die, close the press and press the button for the upper, then the lower.
|
|
STANDARD FEATURES
- A & B Plates #3 Steel / All others #2 Steel
- Guided Ejection included at no extra charge
- Return Pins & Additional Leader Pins available
|
|
Permanent electro-magnetic clamping of moulds on injection mould presses adapted to all sizes and shapes of mould.
STÄUBLI offers a complete range of products serving the PLASTICS INDUSTRY including:
- quick mould clamping,
- quick connection of services using quick-release couplings and multi-couplings,
- automatic ejector hook-up,
suitable for all methods of mould changing: vertical or horizontal loading and existing or new machines.
|
|
|
|
|
|
HotMAG
permanent electro magnetic system for quick clamping of high temperature moulds.
The new permanent electro magnetic system HotMag is the final answer to all the needs to make quick change operations on press machines working with high temperature moulds.
The innovative magnetic circuit, made of special solenoids and high energy permanent magnets, allows to
operate with temperature up to 250° C. (482 ‘F).
The full metallic surface allows the perfect stability and uniformity of clamping all over the contact area
granting high performances in the long run.
Quick: Few seconds only to activate and deactivate the system. Simply pushing a button!
Ergonomic: The operator that can remain always at a distance from the mould. No risk!
Easy and practical: No modification to the machine, no modification to the moulds and no special tools are required.
Time saving: The mould can be preheated outside the machine with a great advantages!
Safe: Only the high strength generated by the permanent magnets will hold the mould at indefinite period of time.
Convenient: The low investment and the high efficiency grants a quick pay back.
|
|
|
|
|
|
Quad-Press: A magnetically clamped mold is subject to neither deformations nor to inner tensions.
The force is distributed uniformly throughout the contact area, instead of only being applied on the external edges of the base-plate, as it happens when traditional clamping methods are used.
The quality of the molded part is constant in time.
Each 80HC square pole generates a constant, predictable and concentrated force of 1000 kg.
This force improves the performances to an unbeatable level, giving a greater available force in a smaller contact area.
Lead time is strongly reduced; now the SMED production is a reality.
Moulds of any size, even bigger than the machine plates are easily clamped with no modification.
Quad-Press is maintenance free, due to it doesn't present any mechanical component inside.
The new IPC system is available on request with the touch-screen device.
IPC follows step-by-step the machine operator during mold change procedure and give in real-time the actual clamping force generated on the mold.
|
|
Benefits offered by Split Boring Bar Holders include:
• Compatability with anti-vibration bars
• Increased cutting performance
• Deeper boring capability (up to 10 times
diameter)
• Increased performance over standard
boring bars
Reduction Bushes
To complement our range of Split Boring Bar Holders, we also offer Split Reduction Bushes for use with smaller diameter boring bars.
Our extensive range of Cap and Hinged-Type Boring Bar Holders suit machines for many leading manufacturers, including Mazak, Doosan, Okuma, Mori Seiki and Hwacheon.
* Cap-Type
* Hinged-Type
In addition to our standard range, Craftsman Tools’ in-house designers can create special Split Boring Bar Holders to suit specific requirements.
|
|
SPLIT BORING BAR HOLDERS
For use with anti-vibration bars
- Deeper boring capability (up to 10 times diameter).
- Increased cutting performance.
* Available with through-tool coolant.
The Split Boring Bar Holder will also increase the performance of standard Boring Bars.
|
|
|
|
Tool-holders, Tool changers
