|
|
|
|
|
|
KIMO designed VT200 model dedicated to air velocity and airflow control.
Easy, accurate and user-friendly, with a large display and a joystick for fast browsing.
Multi-probe, VT200 can be supplied with :
- Ø 14 mm vane probe : direct measurement in pipe from 0.8 to 40 m/s and from 0 to 99,999 m3/h.
- Ø 70 mm and 100 mm vane probes (wired or wireless) with detection of air direction and built-in temperature probe, for vent control from 0.2 to 35 m/s and from 0 to 99,999 m3/h.
- Standard and gooseneck-shaped telescopic hotwire probe (flexible) for very low airflow control, pipe and vent cartography. Probes allow accurate measurements while you carry out scanning average.
Join our distribution network all over the word....Contact us !
- Vane and hotwire probes can be used with cones
- Vane and hotwire probes are available in different dimensions in order to measure airflow on a vent or mechanical air control speed. All dimensions are pre-programmed on the VT200 software, allowing quick access and direct reading of airflow during measurement dataset.
- Pt100 temperature probes from –50 to +250°C.
VT 200 can measure and record 8000 values, which can be transfered to PC via wireless connection.
|
|
|
|
|
|
VELOCICALC® MULTI-FUNCTION VENTILATION METERS
The VelociCalc 9555 Multi-Function Ventilation Meter is a portable, hand held ventilation test instrument. This instrument is designed to work with a wide range of plug-in probes. The probes allow users to make various measurements by simply plugging in a different probe that has the features and functions best suited for a particular application. With the optional probes, measurements include air velocity, temperature, humidity, pressure, CO and CO2. Calculations include air flow, heat flow, turbulence, wet bulb and dew point temperature.
The probes can be ordered at any time and include a data sheet with certificate of traceability. When its time for servicing, only the probe needs to be returned since all the calibration data is stored within the probe. The 9555 model has a straight probe.
Features and benefits:
- Best in class accuracy, especially in low flows
- Displays up to 5 measurements simultaneously
- Optional "smart" plug-in probes, including CO2 and rotating vane probes
- Large graphic display
- Manual or continuous data logging
- TRAKPRO™ downloading software included
- Name test IDs meaningful to you
- Bluetooth® printer capability
- Fast calibration and repair service - just send in the probe
- Articulated probe version available (9555-A)
Applications:
- HVAC commissioning and troubleshooting
- Clean room certification
- Testing and balancing
- Ventilation evaluations
- Thermal comfort studies
- IAQ investigations
- Process air flow testing
|
|
|
Kanomax Climomaster is a multi-function thermal anemometer. It is suitable for many HVAC applications, such as facility ventilation, environmental measurements, and HVAC balancing. This handy and light-weight unit is the most accurate and repeatable hot-wire anemometer in the industry.
|
|
Handheld Digital Thermo-Anemometer - Series 471
Ranges to 15,000 FPM, ±3% Accuracy
Handheld Digital Mini-Vane Thermo-Anemometer - Series MVT
Ranges to 2,358 FPM, ±2% Accuracy, RS-232 Output
Handheld Digital Vane Thermo-Anemometer - Model VT140
Ranges to 4,925 FPM, ±2% Accuracy, RS-232 Output
Handheld Digital Vane Thermo-Anemometer - Model VT120
Ranges to 5,900 FPM, ±3% Accuracy
Handheld Digital Vane Thermo-Anemometer - Model VT-200
Ranges to 8,800 FPM, ±3 Accuracy, RS-232 Output
Handheld Thermal Anemometer - Model 470-1
Ranges to 6,000 FPM, ±5% Accuracy
|
|
General description :
Thermoelectric portable measuring instrument for flow, humidity and temperature
The portable measuring device ThermoAir 3 is designed for low air flow, humidity and temperature measurement.
|
|
Tecpel Hot Wire Anemometer
Circuit: Custom one-chip of microprocessor LSI circuit
Display: 13 mm (0.5") super large LCD display (dual function meter's display)
Measurement: m/s (meters per second)
km/h (kilometers per hour)
ft/min (feet per minute)
knots (nautical miles per hour)
mile/h (miles per hour)
Temp (°C, °F)
Data hold
Sensor structure: Air velocity: Tiny glass bead thermistor
Temperature: Precision thermistor
Memory: Maximum and minimum with recall
|
|
Thermoelectric Flow Sensor
Type FV A605 TA
- Probe tube with heated miniature thermistor for flow measurement and precision NTC resistance for automatic compensation.
- Evaluation electronics are located in a separate sensor transmitter module.
- High accuracy as a result of integrated temperature compensation and individual calibration in wind tunnel, with laser Doppler anemometer as reference system.
- Response time only 2s for smoothing the measured value indicated, optionally without smoothing with 100ms response time.
- Suitable for measuring small flow velocities in gaseous substances, particularly for control systems and monitoring.
- Typical applications include comfort index measurements, HEVAC applications, environmental technology, clean room technology and process measuring and control technology
|
|
# Flow-rate measurement
# Dual display
# Air Speed: 0.20 m/s to 35 m/s
# Ambient temperature: -20 °C to +80 °C
# Flow rate: 0 to 65 000 m3/h
# MAX-MIN-AVG / Hold fonctions
# Dimensions:
Device: 145x75x34mm
Sensor:D=100mm and L=310mm
# Weight: 190g
# C.A 825: flow-rate measurement cone, 10 to 300 m3/h
# telescopic extension (P01.1020.12)
|
|
KIMO specially designed and developed LV107 for air velocity and airflow control in duct.
With Ø 70 mm vane probe, LV107 measures :
· Air velocity from 0.3 to 35 m/s (with detectionof airflow direction)
· Airflow calculation : from 0 to 99 999 m3/h
· Temperature (integrated in probe) : from –20 to +80°C
Simple and accurate, LV107 has a large display. LV107 is supplied with a calibration certificate.
Join our distribution network all over the word....Contact us !
|
|
KIMO specially designed and developed LV101 for air velocity and airflow control in duct.
With Ø 14 mm vane probe, LV 101 measures :
· Air velocity from 0.8 to 40 m/s (with detectionof airflow direction)
· Airflow calculation : from 0 to 99 999 m3/h
· Temperature (integrated in probe) : from –20 to +80°C
Simple and accurate, LV101 has a large display. LV101 is supplied with a calibration certificate.
Join our distribution network all over the word....Contact us !
|
|
KIMO specially designed and developed LV110 for air velocity and airflow control in duct.
With Ø 100 mm vane probe, LV110 measures :
· Air velocity from 0.2 to 35 m/s (with detectionof airflow direction)
· Airflow calculation : from 0 to 99 999 m3/h
· Temperature (integrated in probe) : from –20 to +80°C
Simple and accurate, LV110 has a large display. LV110 is supplied with a calibration certificate.
A airflow cone 200 x 200 mm (for Ø 100 mm vane) is available (optional) for airflow control in duct.
Join our distribution network all over the word....Contact us !
|
|
General description:
Hand measurement device for flow, humidity and temperature
The hand measurement device MiniAir20 is used for the acquisition of flow velocity (propeller principle) such as gasiform and fluid media, acquisition of temperature, relative humidity and revolution. It measures with a high precision. Its robustness is appropriate for a mobile or a laboratory use.
|
|
|
|
|
|
VELOCICALC® ROTATING VANE ANEMOMETER
The VelociCalc® 5725 is a high performance, yet simple to use, rotating vane anemometer. High accuracy and reliability make the VelociCalc 5725 the professional's ideal tool for measuring unevenly distributed or fluctuating flows through heating and cooling coils, diffusers, grilles, and filters.
It accurately measures air velocity and temperature, calculates flow rate, performs averaging, and can determine minimum and maximum readings. Using sweep mode you can quickly provide one averaged reading of velocity or volume over a large measurement area. The large vane head automatically averages velocity and volume readings. The VelociCalc 5725 includes variable time constant, sampling and statistics functions and data logging capability.
Features and benefits:
- Reversible 4-inch (100 mm) head to read supply and exhaust flows
- Calculates volumetric flow rate when user inputs duct shape and size, or area
- Sampling function records multiple point measurements
- Automatic averaging of air velocity
- Simultaneously displays velocity and temperature
- Sweep mode for one overall measurement
- Optional 36-inch telescopic probe available
- Compatible with optional Aircone flow hoods
- Logs 12,700+ samples with a time and date stamp
- Recall, review, store data
- LogDat2™ downloading software included
|
|
Rotating Vanes for Air and Gases
Type FV A915 S120/S140
Sensitive sensor with diamond bearing and precise
adjustment for high accuracies.
The aluminium rotating vanes have stream-lined measuring
heads made from plastic material (polysulfone).
The shafts are, as standard, guided in protected, oiled
beryllium-brass bearing sleeves and supported in tips made
from special case-hardened steel.
Particularly suitable for use in climatology.
Equipped with snap-on measuring heads and, as a result,
very easy to service.
|
|
|
|
|
|
Mierij Meteo offers a wide range of Mierij Meteo wind sensors from low cost to high end performance. Mierij Meteo has more than 25 years experience in the development of wind sensors. All according to the requirements of the World Meteorological Organization (WMO).
Speed and direction of the wind are important parameters in the daily meteorological observations used in weather forecasts. But also in the control of industrial processes. Industries such as renewable energy, transportation and environment require accurate and reliable measurement of wind speed and wind direction.
Anemometers are designed for measuring wind speed and wind vanes for measuring wind direction
All Mierij Meteo wind sensors have passed comprehensive testing and calibration in a purpose-built wind tunnel and wind vane calibrator. Certain models can be supplied with MEASNET certificates at extra cost.
The most popular and widely applicable models are featured on this website, for details of other types of meteorological sensors please contact us.
|
|
| ... products without technical information |
| |
|
|
Anemometers, Thermoanemometer
