|
|
IMADA has wide range of attachment for various applications.
We also can produce special attachment as customized version.
Please request special gripping fixtures.
|
|
Using the CENTOR technology, the CENTOR W digital torque gauges have a very large graphic display and show a maximum amount of information for more efficient measuring: they show the current reading and the peak value at the same time, and a bar graph to show the operator whether they are close to their maximum capacity. If necessary, the backlighting can be used to further enhance reading comfort.
Its advanced measurement chain enables it to use a sampling rate of 1,000 Hertz with a resolution of 1/10,000 FS and a total error of less than 0.5% FS.
Many other functions complete the possibilities of the gauge:
the Set point functions can be used to carry out “OK, NOK” tests: a symbol appears on the display.
The fully programmable RS232 output sends the data to a PC. A digimatic output can be used with Mitutoyo statistical printers.
|
|
Equipped with a built-in Transducer the EZ serie may be used to calibrate quickly and accurately every kind of fastening tools (torque wrenches, electric and air screwdrivers).
Memorized readings can be easily transfered to any kind of computer or printer through RS 232C port. With The EZ SMART version enjoy extreme measuring flexibility and full traceability of your tools thanks to additional functionalities.
External transducers may be connected to the EZ SMART becoming a small-sized portable torque readout to achieve torque audit along the assembly line!
- Easy to use scroll menu
- Real time clock
- 500 datas FIFO memory capacity
- RS232 output
- Mini/ok/Maxi torque limits
- Peak, first peak, track measuring mode
- Automatic and manual reset
- Calibration display
|
|
|
With the boxes of measurement of couple Weber: finished the long discussions concerning the couples of screwing.
|
|
|
Proper torque measurement is critical in many assembly operations. AIMCO provides expertise and measurement equipment for all three phases - before, during, and after assembly. Tool testing and capability studies can be easily performed in the tool crib or lab. Fine tuning of torque settings and process verification are achieved on the assembly line with rotary transducers. Use our complete line of electronic wrenches for final residual torque testing.
|
|
Detect foundation settlement in time
HYDRALIGN is an online monitoring system based on the measurement principle of a water level. The hydrostatic measurement system has various application areas and is especially suitable for long term monitoring of plants and machine foundations as well as monitoring of building settlements. The pressure sensors are permanently installed on the machine foundations to measure height changes exactly
|
|
|
|
|
|
Chatillon® DFE Series
The Chatillon® DFE Series is a compact, easy-to-use force gauge designed for economy applications without compromising functionality. Ideal for handheld or test stand applications, the DFE is available with capacities from 2 lbf (1 kgf, 10 N) to 500 lbf (250 kgf, 2500 N). The DFE features an integral loadcell with a measurement accuracy of better than 0.25% full scale. A large, easy-to-read, high resolution dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, loadcell actuation and direction. Loads are displayed in ozf, gf, lbf, kgf and N units. The display can be inverted and displayed results may be "hidden" from the operator. The DFE gauge may be specified with or without RS232 serial communication. All DFE Series force gauges come with a carrying case, battery adapter/charger, testing accessories and NIST Certificate of Calibration with data. Uncertainty data per ISO/IEC 17025 is supplied standard.
Standard Gauge Measurement Functions
Normal Tensile and Compression Measurement
Peak Tension and Compression Measurement
Pass-Fail Limits
High & Low Setpoint Limits
Statistical Calculations
|
|
Simple digital force gauge : CENTOR FIRST
Simple and yet complete, the CENTOR First force gauge uses efficient technology to simplify force measurements, in tension and compression ...
Graphical force gauge : CENTOR EASY
Simple and complete,the CENTOR "Easy" is the best instrument for measuring in the workshop.The screen provides simultaneous readout of the current and maximum values as well as...
Advanced graphic dynamometer : CENTOR STAR
The CENTOR "Star"has many functions.It will become your preferred force measurement tool.The graphic screen displays the complete Force=F(t) curve ,...
Two sensors force gauge : CENTOR DUAL
It has all the functions of an STAR force gauge, but its calculation power enables it to record values sent by 2 different sensors simultaneously
|
|
The unique Alluris digital force gauge series FMI combines precise measurement with a very rugged aluminium dye cast housing. This robust housing in not only to protect the electronics but also to allow the use in a test stand with limited distortion. We offer a 5 year warranty periode for those instruments which are maintained and calibrated regulary in our works.
> 0,05% or 0,2% accuracy
> PEAK detection with 1000Hz sampling rate
> USB-Interface, RS232C-Interface, analog output (+/-1VDC)
> Overload output for test stand applications
> Comparator with limit switch
> Memory for 1000 measurement data
> Longlife load cell (mech. 200% overload)
> Display reversable for test stand applications
|
|
|
|
|
|
Multi-Measuring System, PHYSIMETER® 906 MC-S/E
The PHYSIMETER® 906 MC-S/E is a universal multi measuring system that, due to its versatility and its modular construction meets all relevant demands of technical measurements. The core of this system is a fully-fledged PC in the size of a credit card. For the first time, integration of different complex technologies in connection with an intelligent system architecture results in an efficient measuring system with intuitive operation. High quality and a clean design underlines the consequent concentration on perfect functionality and ergonomics. Designed as a mobile system the PHYSIMETER® 906 MC S/E is equipped with four channels for simultaneous data-recording of physical values such as force, stroke, pressure as well as the number of revolutions, torque or rotational angles. The versatile amplifier allows the connection of strain gauges, inductive stroke sensors, digital and analogue signals. The connected sensors are automatically identified and can be changed during operation. The strong aluminium housing plus optional force sensor enables the unit to be integrated in a stationary measuring system and is suitable for a load of 1kN.
|
|
It is the force measuring instrument of the electronic formula which can measure both tension and compression power by single axis.
It excels in a response and measured value is displayed in an instant. Since it is a digital instrument, various functions are available. For example, the memory function which can memorize up to 1000 measuring data, comparator function which can program high and low set points. ZP series has USB output function and it becomes easy to connect a computer. Using optional software, it is possible to make precise force-time chart by high speed USB communication. By using with a test stand, it corresponds to a large area from the field of a quality control to the field of research and development.
|
|
|
|
|
|
Mecmesin digital force gauges are state of the art instruments, specifically designed to measure force in tension and compression (push or pull) with optimum precision and performance.
The Advanced Force Gauge (Mark 4) is the most versatile and fully-featured instrument offered by Mecmesin. The AFG comprises of 10 different models ranging from 2.5N to 2.5KN with the added ability of 1st peak and ultimate peak hold. The bi-directional interface (RS232, Mitutoyo, Analogue) ensures full data transfer between PC's, data-loggers and Mecmesin stands. All AFG's feature superb accuracy at ±0.1% of full scale and a sampling rate of 5,000 times per second.
The BFG (Basic Force Gauge) range of rugged, flexible and reliable instruments are designed for easy operation and outstanding force measurement performance - all at a budget price. A precise and reliable instrument, the BFG features accuracy at ±0.25% of full scale and a sampling rate of 1,000 times per second.
The CFG (Compact Force Gauge) is a pocket-sized, lightweight and low-cost force gauge, ideal for performing elementary tension and compression testing. The CFG is available in 3 capacities and features include a data sampling rate of 10Hz, accuracy of ±0.5% and versatile measurement options lbf, N, ozf, kgf and gf, with a resolution of 1:1000 or better.
Used either handheld or combined with a test stand and accessories they offer a complete testing solution for a virtually limitless range of tension and compression applications.
|
|
Technical Highlights:
- Data Sampling Rate: 1000 Hz
- Accuracy: 0,5 % of Capacity
- Secure Operability due to ergonomically Design
- Overload Protection 200 % of full scale
- Turnable Display automatic direction identification
- Attachable to all SAUTER Test Stands
- Auto-Power-Off
|
|
General description new BINTPRES M50
- Microprocessed instrument with Autozero function, suitable for the rapid, accurate and reliable measurement of the force applied by brush holder springs on the brushes of rotating electrical machines.
- New SM5 probes for better accuracy, reliability and strenght.
- Double kg and Newton digital readout, with a large dot matrix lcd display for an easy readability.
- Interchangeable probes, previously easy and quick instrument recalibration.
- Simple to use, small dimension, easy to handle.
- Lightweight, compact, rugged.
- Supplied with SM5 probe and carrying case.
- Fully complies with CE Directives.
|
|
Dynamometer radio + cable,
radio up to 250 m distance
cable up to 10 m distance
consisting:
-Measuring rod (max. 8 Stück)
-Hand receiver
-Accu charger
- Alu-case
Options:
a) 10 m coil-cable for cabel function
b) Further Measuring rods
c) Radio frequency 869 MHz
|
|
|
|
|
|
RON 2150 Dynamometer is a unique combination of the smallest and lightest load cell with a very large display.
The small and light load cell ensures portability and low headroom loss for any application. The large display ensures readability from a considerable distance.
RON 2150 also offers two systems in one: the removable display enables the user either to hold the large indicator in his hand or snap it very easily onto the load cell. By this means, the user's personal safety is ensured as under no circumstances will he have to approach the load in order to read the result: he will either hold the remote indicator in his hand or read the large display from a safe distance.
The separation of load cell and display also increases the system's durability.
The load cell's unique perpendicular hole structure neutralizes external moments and thus improves safety and accuracy.
RON Crane Scale and cable Dynamometer series are used for weighing during lifting, overload prevention, force, load and tension measurement and cable and wire tension monitoring and control.
Cable Dynamometers are often used by electricity and communication companies for cable and wire tension monitoring and control. RON systems low weight ensures their portability and makes them especially suitable for these applications.
A marine version of the RON 2150 Shackle Type is also available for offshore applications.
All Crane Scales and Cable Dynamometers are factory-tested and supplied with a test certificate, including a fully traceable calibration chart.
|
|
|
|
|
|
The dynafor® LLX2 dynamometers are precision appliances (0.1% ), for measuring pulling force and indicating loads. The capacity scale ranges from 500 daN to 6300 daN.
A dynafor® LLX2 is made up of a sensor and a mobile display unit. A two-way radio link-up using the 2.4 GHz wave band conects the two components.
16 radio channels are used. Each display unit and sensor have their own address, enabling unequivocal identification in the event of a multiple set-up.
The specific, patented shape of the attaching head enables you to use either standard shackles or standardised accessories for chains.
The LLX2 is available in two versions: Standard version with interlinking anchoring rings in the perpendicular surfaces, or an optional version with the anchoring rings both on the same side. The standard version enables articulation of lifting accessories on both sides, thus avoiding stresses due to load movements and enhancing appliance precision.
These assemblies are put together on our production line and cannot be modified later by the user. The technologies implemented on a radio and software level offer, aside from the standard uses to be expected from an industrial dynamometer, multiple configuration possibilities that combine several sensors with several display units. They also offer access to advanced function such as: saving, threshold management, monitoring etc. The PC - USB link permits to dowload, save and manage measurements data.
|
|
Using the Centor technology, the Centor W Easy TM digital torque gauges have a very large graphic display and show a maximum amount of information for more efficient measuring: they show the current reading and the peak value at the same time, and a bar graph to show the operator whether they are close to their maximum capacity. If necessary, the backlighting can be used to further enhance reading comfort.
Mounted with a non removable external mini torque sensor, it allows you to measure very small torque with the high accuracy required.
Its advanced measurement chain enables it to use a sampling rate of 1,000 Hertz with a resolution of 1/10,000 FS and a total error of less than 0.5% FS.
Many other functions complete the possibilities of the gauge:
- The Set point functions can be used to carry out “OK, NOK” tests: a symbol appears on the display.
- The fully programmable RS232 output sends the data to a PC.
- A digimatic output can be used with Mitutoyo statistical printers.
|
|
|
The Mecmesin range of digital torque gauges and systems is based upon the AFTI display unit, together with an appropriate `smart` torque sensor and gripping fixture.
|
|
|
|
|
|
Super high-speed sampling at 2000 times/second. Digital hold and peak hold functions. Ideal for measuring the dynamic phenomena of loads, pressure, torque, tension, etc.
The AD-4532B is equipped with a 2D (5-level) comparator function. This function makes it possible to determine the acceptability of the total result by performing a sequential comparison while shifting between the upper/lower limit in five levels using a time axis or an external input (trigger). The AD-4532B is ideal for use in measurements such as a press-in operation, which require changes in the comparison value as time elapses. The five comparators can also be used separately. The comparator judgment is indicated by a highly intuitive, tricolor (Orange/Green/Red) LED on the measurement data display.
The AD-4532B also features a chatter-prevention function. If bouncing of the comparator value occurs repeatedly near the upper/lower limit, a heavy burden will be placed on the relay circuit and other parts. To prevent this, the AD-4532B has a function to set the hysteresis width and time.
The AD-4532B comes equipped with an analog amplifier voltage output (±10V), a D/A analog voltage output (±10V), a comparator output and a Modbus-RTU input/output. In addition, we offer an optional BCD output, RS-232C input/output, D/A analog voltage/current output (±10V / 4-20mA) and Ethernet. The upper/lower limit setting, the zero compensation function and the hold function can be executed via Modbus-RTU.
Please see the AD-4532B catalog for further details.
|
|
A truly measured roll force is crucial in achieving correct roll gap settings, true force distribution from operator side to drive side of your mill and supervision of the backup bearings and roll eccentricity. The Millmate Roll Force System incorporates all these essential features.
The Millmate Roll Force System consists of a Millmate Controller (MC 400) and two load cells with matching units. The various types and the wide load range of Millmate Roll Force load cells cover practically all conceivable roll force measurement applications.
|
|
The DFS-II is a system used for testing the force on the tip of the tool of a wire bonder and in some die attach bond heads as well. The DFS-II system scope displays a wave form that permits the user to establish whether there is excessive vibration, impact force or unwanted movement on the bond head as it touches down on the surface of the DFS-II Sensor. The wave form can then be printed on the on board printer for hard copy recording.
This is a perfect tool for calibration, troubleshooting, setup and verification of machine operation. Both force and time duration can be measured in actual units (force in grams and time in milliseconds) without the need of conversion charts or extra calculations. The DFS-II can be used with wire bonders of any type (automatic, semiautomatic and manual) and of any manufacture. Maximum force measured by the sensor is 500g.
Contact us at mailus@hybond.com for more information.
|
|
The LCIC-WIM is the 2nd generation to our popular line of Load Cell Interface Card that thousands of them are being used all around the world. The LCIC-WIM samples the Load Cell in a rate of 52,000 samples per second so, it fits all dynamic weighing and force measurement applications.
The package includes also our unique LCIC-WIM Monitor utility which is a vital tool for analyzing dynamic load/force applications. It allows to collect the data, showing the results in graphic mode or save it for later use in excel etc.
The communication with the LCIC-WIM is via USB or RS232/485 so, it can be used with almost any PC or other computer.
|
|
25.4mm LCD display
Accuracy 0,1% Emax
Shackles included (D150E-12 excluded)
Remote control included
Radio transmission LPD 869,87 MHz (available)
Capacities (Kg.)
1.000, 3.200, 6.500, 12.000
|
|
|
|
|
|
The Centor Star is the most advanced force gauge currently available, it has become the benchmark tool for force measurement. Besides having all the functionalities of the Centor Easy, it also provides additional handy possibilities: with its graphic capabilities, it can calculate and display in real time, not only the maximum, but also the values of the particular points of the curve, such as the rupture force, force on a trigger, force at a given time, first peak, etc.
The new features:
– Maximum within a time window: makes it possible to define a particular time period for a test and to calculate the maximum force during that period while keeping the test maximum in memory
– Calculation of the time necessary to reach the maximum force in tension or compression
– Average force over the duration of the test
All these results are stored in memory (up to 100 tests) which allows statistics to be calculated on the maximum values and on configurable calculations, then sent to a PC along with the dates and times of the measurements.
Furthermore, it is possible to freeze its configuration to avoid handling errors. It is the most versatile instrument designed for all tests in industrial surroundings.
|
|
|
|
|
|
Digital force gauge for determination of compression and tension forces, usable for numerous applications in a lot of sectors of industry with RS 232, USB, Digimatic or analog output signal
- 2 operation modes:
real time - display the actual tension or compression force
peak force - to measure the peak force during a test
- Force measuring device with high sampling rate of 1000 times/sec to measure the peak force during a test switchable to 30 times/sec for applications with slow-changing forces or for damping forces, beeing influenced by vibrations.
- Display update time 10 mal/sec
- Force gauge with user switchable units: N, gf (kgf) und ozf (lbf)
- Programmable high/low set-points for go/no-go testing:
Display: underrun (-) - good (O) - exceeding (+)
- »Zero Set« to zero the gauge in all operating positions
- Manufacturers calibration report is included
- Display can be reversed for inverted use; e. g. on vertical test stand
- Force measuring device for exact measuring with an accuracy of 0.2 %
- Overload protection: 150 % full scale (up to 5 N)
200 % full scale (from 20 N)
- For hand-held use or mounting on test stand (mounting thread 4 x M4 in back)
- Easy to operate
- Force gauge with easy to read LCD display
- Ergonomically-designed, rugged die-cast aluminium housing
- Operates on rechargeable battery (NiMH) and/or AC adapter
- Full set of accessories included
|
|
|
|
|
|
RON 2000 Shackle Type is the smallest and lightest portable Dynamometer.
RON 2000 portable Dynamometer is a basic, easy-to-operate and very reliable tension load meter. Digital dynamometers are used for weighing, force, tension, load measuring and load control.
RON 2000 digital dynamometer has a miniature load cell which ensures portability and minimum headroom loss for any application.
The load cell's unique perpendicular hole structure neutralizes external moments and thus improves safety and accuracy.
RON 2000's indicator is separated from the load cell and is held by the user. This separation ensures the user's safety since under no circumstances will he have to approach the load in order to read the result. This separation also guarantees the durability of the portable Dynamometer.
RON Crane Scales and portable Dynamometers are used for weighing during lifting, overload prevention, load measuring, load control and load monitoring.
All RON Crane Scales and portable Dynamometers are factory-tested and supplied with a test certificate, including a fully traceable calibration chart.
|
|
The ANDITORK bottle or jar opening tester is specially designed to measure opening torques for bottles and jars. It is equipped with a grip plate that holds products from 10 mm to 200 mm in diameter. The rubber-coated gripping fingers are adjusted quickly using a travel knob. Torque readings can be made by tightening or loosening it, and the RS232 output can be used to save the data to a PC.
If the cap has a safety ring, the test can be carried out using the ANDITORK Star, which measures both the break (first peak) and the opening torque (max torque).
|
|
The TMI series cap torque testers includes low cost measuring instruments to capture two directional PEAK forces as well as sophisticated devices with data memory, USB output and USB Flash-Card connection to store data. The high-end versions are able to capture multi peak in order to check pilfer proof caps.
> 0,5% accuracy and 1000Hz Peak detection
> Multi-Peak for pilfer proof caps
> Rugged, heavy and splash water proof (IP44)
> Memory and USB-Interface
> OK/NG-indication with colored LED's
> Interface for USB-Flash Card
|
|
|
|
|
|
CapStar II is a simple and easy to use digital torque tester. The accurate information provided can then be stored in the internal memory, and downloaded to a printer or computer.
The LCD digital read-out clearly displays the peak torque of each test. Preferred units of measurement may be selected from a list of seven options. Statistical analysis of sigma, mean and range is also available when the data is printed out.
Container to be tested are located in adjustable jig capable of clamping circular or custom bottles and jars from 10 mm to 130 mm in diameter. Child resistant closures, much used in the pharmaceutical industry, can also be tested.
CapStar II is housed in a rugged, drip proof ABS housing with wipe-clean, touch sensitive controls. CapStar II is portable, battery powered and can be used with an optional mains battery charging unit. The screen displays a warning when the batteries need replacing or charging.
To save power CapStar II switches off automatically if no key is pressed within a specified pre-set period.
|
|
|
|
Force measurement instruments, Torque measurement instruments
