|
|
Features and Standards
The Bangkok Solar BS 40 amorphous silicon solar modules are glasslaminated
and encapsulated with EVA to protect solar cells from moisture
entire their lifetime. The BS 40 is perfect to use in many climatic
conditions i.e. sunny, cloudy, rainy and even at low light and under
shadow.
|
|
Features and Standards
The Bangkok Solar BS 40 amorphous silicon solar modules are glasslaminated
and encapsulated with EVA to protect solar cells from moisture
entire their lifetime. The BS 40 is perfect to use in many climatic
conditions i.e. sunny, cloudy, rainy and even at low light and under
shadow.
|
|
Features and Standards
The Bangkok Solar BS 40 amorphous silicon solar modules are glasslaminated
and encapsulated with EVA to protect solar cells from moisture
entire their lifetime. The BS 40 is perfect to use in many climatic
conditions i.e. sunny, cloudy, rainy and even at low light and under
shadow.
|
|
SOLEMS photovoltaic modules are small weatherproof solar panels directly converting solar energy into electricity. They are used in many low consumption remote systems : measurement stations, meteorology, emergency call units, irrigation, water purification and control, data transmission, security, traffic signs ...
- Thin-film solar silicon photovoltaic modules from 0 to 4Wc
- Outdoor use in any climatic conditions
- Excellent sensitivity in cloudy weather (low illumination)
- Glass substrate, thickness 2 or 3mm, rectangular shape
- Operating voltage : 4V, 6V, 9V, 12V, 24V or another on request
- Battery overcharge protection inside the output cable (option)
- Life time > 10 years
|
|
SOLEMS low light solar cells are directly converting any light into electricity. They can supply DC current to low consumption electronics : watches, calculators, measurement units, ... and other technical products shown in the "applications" section of this website.
- Thin-film solar cells from 0 to 200cm².
- Excellent sensitivity under low illumination, even artificial light
- Ideal for indoor use, but also suitable for outdoor use under sunlight, with additional climatic protection
- Glass substrate, 0.5 to 2mm thickness, rectangular shape
- Operating voltage : 1.5V, 2.5V, 5.5V or another on request
- Applications : low consumption electronics : CMOS circuits, LCD, watch movements ...
|
|
SX 375 J
Typical applications: Off-grid and instrumentation
Key features: Instrumentation, off-grid, robust with j-box for field wiring
Cell technology: Polycrystalline
Dimensions: 1209mm x 537mm x 50mm
Weight: 16.94 lbs
Glass type: Low lead, 92% transmission
Frame type: Universal, dark bronze anodized
|
|
|
|
|
|
Our solar laminate AKASOL® is a combination of TEDLAR® PVF films and other polymer films. Because of the outstanding mechanical, electrical and chemical properties as well as the extraordinary resistance to weathering, our solar laminated films ensure effective protection for the sensitive photovoltaic modules throughout the long service life.
AKASOL® laminated films are manufactured in to give a variety of designs from polymer film and/or TEDLAR® films. The most common material for the inner layers is PET film with a thickness of 75 µm, and the outer layer is usually a PVF film 38 µm in thickness. Alternatively a 25 µm PVF film can be used as the outer film. PET films are dimensionally stable, moisture-resistant and are characterised by their outstanding electrical insulation properties whereas PVF films assure dependable protection from UV radiation.
In the case of transparent photovoltaic laminated films, particular attention is paid to good light transmission. It is for this reason that we also supply combinations with ETFE films for extremely high transparency. As these laminates have to be particularly thin, PET film with exceptional stability to moisture is used here.
|
|
|
Integrated into the business segment ersol Modules, the subsidiary aimex-solar GmbH supplies photovoltaic modules based on high-efficiency mono- and multicrystalline silicon solar cells in the sizes 125 mm x 125 mm, 150 mm x 150 mm and 156 mm x 156 mm. These modules offer high efficiency and excellent value for money. There are two PV module product ranges, each differing in the number and quality of the cells used. aimex-solar also supplies PV modules and solar cells from well-known German and international manufacturers.
|
|
|
|
|
|
Himin Photovoltaic Department is devoted to the production and promotion of solar photovoltaic products. Our main products include solar modules and solar lamps. Our production capacity of the solar photovoltaic modules is 50MW.
Under the instruction of “ODIC”(zero distance) strategy of Himin Group, Himin Photovoltaic Department has cooperated with Chinese Academy of Sciences, University of Sydney, Fraunhofer Institute of Germany and other solar institutes, actively introduced the advanced solar photovoltaic technology into the production.
The integration of the grid-connected photovoltaic system and the building doesn’t occupy any ground area, and the solar modules can replace the common building material and save support structure. It can also save the cost for material and installation. The integration design makes the architecture much more beautiful and energy saving.
The off-grid pv system suits for the areas without power grid, such as the remote mountain areas and the island areas. It also suits for other areas lacking electricity. It can provide 220V/50Hz AC power to various electric facilities. It is energy-saving and environment-protecting. It is controlled intelligently, and has a long life span.
|
|
KPE has a wide range of solar modules that can be used across a
variety of applications like Stand-alone, grid-connected, industrial
and rural area.
We provide different module ranges that allow customers to optimize the performance of their photovoltaic installation whether the critical application criteria is power, size, strength, low light performance or aesthetics.
Custom made modules
- Less than 1Wp
- 1Wp ~ 30Wp
Standard modules
- 50Wp
- 75Wp
- 100Wp
- 150Wp
|
|
|
The SEM 160 S modules are manufactured with 72 monocrystalline silicon cells measuring 125 x 125 mm, vacuum encapsulated at high temperature between two EVA (Ethylene/Vinyl/Acetate) sheets, externally protected by an extremely transparent temperate glass and a Tedlar sheet and inserted in a strong anodised aluminium frame. The S.E. Project™ production process guarantees maximum protection for the photovoltaic cells, even when they are subject to the worst working and climatic conditions. Thanks to their reliability and excellent performance, the SEM 160 S modules are suitable for both grid connected and stand-alone installations. The photovoltaic modules are produced in the S.E. Project™ factory, which is ISO 9001/00 standards certified. The modules are equipped with MC-type 100-cm long quick-coupling cables.
|
|
The SEM 85 S modules are manufactured with 36 monocrystalline silicon cells measuring 125 x 125 mm, vacuum encapsulated at high temperature between two EVA (Ethylene/Vinyl/Acetate) sheets, externally protected by an extremely transparent temperate glass and a Tedlar sheet and inserted in a strong anodised aluminium frame. The S.E. Project™ production process guarantees maximum protection for the photovoltaic cells, even when they are subject to the worst working and climatic conditions. Thanks to their reliability and excellent performance, the SEM 85 S modules are suitable for both grid connected and stand-alone installations. The
photovoltaic modules are produced in the S.E. Project™ factory, which is ISO 9001/00 standards certified.
|
|
Solarfun Advantage
- 100% of cells are carefully manufactured by Solarfun Power,
ensuring excellence at every step of production
- Rugged double-coated aluminum-alloy frame for longevity in
adverse conditions
- Every cell is individually inspected and power-matched to ensure consistent performance between the cells in the module array Solarfun's photovoltaic modules offer high-powered, reliable performance for solar projects, both on- and off-grid.
- Strictly adhering to ISO 9001 quality and ISO 14001
environmental standards
|
|
Special glass
There is used special solar in our modules which is tempered and has low iron content also. Using the unique technology in production of this glass is reached for maximal transmisivity of solar irradiation.
Frame
Using the special designed and patented frame the installation of SG modules is faster and easier. PV system is more stout.
Power output warranty
After 12 years at 90% and after 25 let at 80% of nominal power.
|
|
Technical data
- PV Cells: monocrystalline with high conversion efficiency, table yield and optimised electric contacts.
- Front: tempered/textures glass with low iron content to allow good sunlight transmittance.
- Encapsulant Material: EVA, polymerised at high temperature, with UV stabilizer and low permeability to water/humidity.
- Back: Tedlar film (PVF-PE-PVF) allowing maximum protection against atmospheric agents
- FRAME: anodised aluminium with existing holes for easy installation.
- JUNCTION BOX: new junction box, IP55 protection, water/dust resistant. Equipped with 3 bypass diodes, H07NR-F (1.90 m) cable and Multi Contact connectors.
|
|
|
|
|
|
Suntech's monocrystalline photovoltaic panels are designed and built to deliver the highest efficiency and the most reliable power for on-grid and off-grid residential and commercial systems. Relying on Suntech's highly regulated manufacturing standards and the latest PV technology; these modules provide the highest possible energy output per Watt.
Made from monocrystalline silicon substrate from a single large crystal, Suntech's panels offer a superior conversion rate and exceptional low-light performance. Our Monocrystalline Photovoltaic panels are ideal for the most challenging conditions of military, utility, residential and commercial installations. Suntech's modules are the ideal choice when outstanding performance and exceptional uniform appearance is required.
Features and benefits
- High efficiency, monocrystalline silicon substrate
- Outstanding low-light performance
- Uses high transparency, low-iron, tempered glass
- Panels withstand high wind-pressure and snow load
- No problems associated with water freezing and warping
- Preeminent aesthetic appearance
- Easy installation
- Designed to meet the unique demands of our customers
|
|
Specifications: USP 5
Cell Type Cut cells from 125PSQ. Solar
Cell
No. of Cells 18
Application Battery Charging Etc.,
Maximum Power 5.0 W
Minimum Power 4.5 W
Dimensions (mm) 356 x 166 x 22mm ±1
Electrical Specifications:
(Test Condition: Irradiance 1,000 W / m 2, Module Temperature 25 o C Airmass 1.5 spectrum)
Open Circuit Voltage(Voc) 10.5 V
Short Circuit Current (Isc) 0.68 A
Max. Power Voltage (Vmax) 8.50 V
Max. Power Current (I max) 0.59A
Absolute maximum Ratings
Operating Temperature -40o to +90o C
Storage Temperature -40o to +90o C
Dielectric withstand Voltage 2,000 max, V-AC
With Wind Speed Max 60m / sec
These data represent the performance of typical modules as measured at their output terminals, and do not include the effect of such additional equipment as diodes or cables.
During the stabilization process which occurs during the first few months of deployment, module power may decrease approximately 3% from typical Pmax
|
|
Photovoltaic Module
The solar module is an semiconductor device that directly converts light energy into electrical energy through the photovoltaic effect.
The module has two thin films of + and - polarities that connect to a series circuits fo power generation at a fixed output.
- Power Module GMG Series
- Small Module GMA Series
- Foldable Module GMH Series
|
|
A leader in power performance, with a dark aesthetic appearance to blend into your home’s roof.
Typical applications: Residential
Key features: Dark back aesthetics, tight tolerance, premium module, rack mount
Cell technology: Monocrystalline
Dimensions: 1593mm x 790mm x 50mm
Weight: 33.88 lbs
Glass type: Low lead, 92% transmission
Frame type: Universal, dark bronze anodized
|
|
Multi-purpose 235 watt module from the world’s trusted source for solar.
Using breakthrough technology, made possible by nearly 50 years of proprietary research and development, Sharp’s NU-235F1 solar module incorporates an advanced surface texturing process to increase light absorption and improve efficiency. Common applications include commercial and residential grid-tied roof systems as well as ground mounted arrays. Designed to withstand rigorous operating conditions, this module offers high power output per square foot of solar array.
|
|
MONO-CRYSTALLINE SILICON PHOTOVOLTAIC MODULE WITH 175W MAXIMUM POWER
This mono-crystalline 175 watt module features 16.2% encapsulated cell efficiency and 13.45% module efficiency.Using breakthrough technology perfected by Sharp's nearly 45 years of research and development, these modules use a textured cell surface to reduce reflection of sunlight, and BSF (Black Surface Field) structure to improve conversion efficiency. An antireflective coating provoides a uniform blue color and increase the absorption of light in all weather conditions. Common applications include office buildings, cabins, solar power stations solar villages, radio relay stations, beacons and traffic lights. Ideal for grid-connected systems and designed to withstand rigorous operating conditions, Sharp's NT-175U1 modules offer the maximum usable power per square foot of solar array.
|
|
E6M+ BlackPower®, a 156 mm x 156 mm silicon solar cell, features high energy yields and sustainable efficiencies of more than 17%.
In addition, these ersol monocrystalline cells are easy to use, exhibit high mechanical stability and perform well under diffuse light. Thanks to their uniform black exterior, E6M+ cells are specially suited to solar systems with critical architectural requirements.
|
|
Product Features:
- Excellent SiNx coating
- Excellent spectral response in short and long wavelength
- No residual dark point
- Strict measurement of reverse current to avoid hot spot
|
|
Product Features:
- Excellent SiNx coating
- Excellent spectral response in short and long wavelength
- No residual dark point
- Strict measurement of reverse current to avoid hot spot
|
|
Product features:
- High and stable efficiency in photovoltaic conversion Advanced diffusion technique ensuring the homogeneity of energy conversion efficiency of the cell.
- Advanced PECVD film forming, covered by dark blue silicon nitride anti-reflection film, it is in homogenous color and beautiful appearance.
- High quality metal paste for making back surface and electrode, ensuring good conductivity, higher pulling strength and soldering easiness.
- High precision patterning by screen printing, easy for the soldering machine to proceed with automatic soldering and laser cutting.
|
|
|
JSC "Kvazar"'s principal product range is represented by mono-and multicrystalline silicon cells. The company has a great experience in cell production, as it has been manufacturing them for more than 10 years. Our production operates within a closed cell cycle.
|
|
|
|
Solar panels, Solar cells
