|
|
|
|
|
|
Complete solutions for MIL-STD-1553 network
Axon' has developed different components such as data bus couplers, cables and connectors to the MIL-STD-1553 standard for data bus transmission systems for on-board aeronautic, space systems and military applications.
Advantages
- Qualifications :
MIL-STD-1553B, ARIANE5, Digibus, EN3567 specification, EFA programme specification,
- Space programmes :
COLOMBUS, ATV, ISS (CNES & ESA approvals, BOEING & NASA approval for the ISS) , EUROSTAR3000
- IEEE1394 (FireWire), IEEE 1355, Space Wire, Fibre channel
- EMC / EMI
- Weight and space savings
For space applications, the assembly of components is carried out in a class 100000 clean room
Control
- MIL-STD-1553-B axon test bench harness validation
- For high speed data rate transmission eye diagrams with jitter, Bit Error Rate, eye opening measurements available
- EMC / EMI test bench for cables & connectors
Construction
- Databus screened twisted-pair cables or quads
- Databus cables according to MIL, EN or customer specification
- High speed data bus cables with screened parallel pairs
- In-line micro-couplers or removable couplers from 1 stub to 8 stubs
- QPL relay or coupler relay
- Bus terminators
- Splices with controlled impedance
- range of MIL-STD-1553 connectors
- Stub loads and various accessories
- Customised products
Applications
- MIL-STD-1553B databus network
- High speed data rate transmissions
- Cabling of rockets, aircraft, satellites, space vehicle, orbital facility, helicopters, tank, military ground equipment
|
|
Due to the increasing data transfer between machines and equipment the higher standards in data and computer applications are necessary.
Besides standard processes the requirement of precise data transfer must be the first and foremost.
Depending on the requirement, the HELUKABEL® customer can choose the data or computer cable from an extensive stock, where almost all cable constructions are ex stock.
If solid, flexible or high flexible constructions, with corresponding screening if necessary, this all depends of the required application. Our technical advisers are ready to inform you.
We can also manufacture cables according to your specific requirements with a minimum order quantity. For special enquiries please fill-in our attached enquiry form.
|
|
XTRA•GUARD®
HIGH PERFORMANCE ELECTRONIC CABLES
IIn today's world of sophisticated electronics, every application is critical! Computers efficiently monitor and control multi-million dollar production lines and processes.
The integrity of your system is only as solid as the electronic cable on which the control signals are communicated. If the cable fails, your system is down. Production time . . . efficiency . . . profits . . . lost.
If you think that wire and cable is just wire and cable . . . think again.
The cable you install must be capable of efficient signal transmission while it withstands the environmental abuses of heat or cold, intermittent or continuous motion, abrasion, immersion in oils or EMI/RFI interference.
|
|
Cat 6 23/4pr solid BC
ETL Verified, Tested to 600 MHz
Cat 6 23/4pr solid BC
Plenum Rated
ETL Verified, Tested to 600 MHz
|
|
Cabelte starts the production of copper telecommunication cables since the early 1970’. The first copper cables were made of PVC insulated conductors twisted in pairs.
The rise of the new generation of cables with better characteristics for transmission, takes place in the 80s with the use of solid and cellular polyethylene as insulation material.
Today, the use of copper telecommunication cables embraces other applications, as a result of the progress revealed on transmission systems. In the’ 90s, a new generation of cables for customer premisses appears, adapted,not only for voice, but also for image and data transmission, with optimized performance capable of supporting high transmission rates.
|
|
CC-Link ensures high-speed communication between data and field devices (such as controls, sensors or actuators) at the control and field level.
Thanks to a wide range of automation devices from various manufacturers, communication can be provided along a single cable, thereby facilitating integrated and effective production.
|
|
PVC data cables
PVC data cables with overall copper screen
PVC data cable extra fine wires with overall copper screen
PVC data cable with pair-wise and overall copper screen
Semi rigid PVC data cable acc. to UL
Semi rigid PVC data cables with overall copper screen acc. to UL
Semi rigid PVC data cables acc. to UL
FEP insulated Koax cable
|
|
As supplier of underground cables, telephone cables for indoor and outdoor lying, as well as fi re warning cables HELUKABEL® provides for a short term delivery-readiness. Modern and powerful cutting machines ensure even the demands for fi xed lengths within a short term processing.
To the nearness of our customers (stock in Hemmingen/Stuttgart, Neuenhagen/Berlin, Pleißa/Chemnitz and Windsbach/Nürnberg) we are also as direct deliverer to the customers construction sit for short scheduled term onthe- spot.
On request we deliver also vehicles with lifting platform for better loading and unloading.
|
|
Cabelte starts the production of copper telecommunication cables since the early 1970’. The first copper cables were made of PVC insulated conductors twisted in pairs.
The rise of the new generation of cables with better characteristics for transmission, takes place in the 80s with the use of solid and cellular polyethylene as insulation material.
Today, the use of copper telecommunication cables embraces other applications, as a result of the progress revealed on transmission systems. In the’ 90s, a new generation of cables for customer premisses appears, adapted,not only for voice, but also for image and data transmission, with optimized performance capable of supporting high transmission rates.
|
|
New railway cable generation (January 2004) according to European standard EN 50200. Operability in the case of fire. Bus and control cables, protected, halogeneous-free, flame-adversely.
2-pairs (star quad) bus cable with 0,5mm² conductor cross section, radiation cross-linked Foam Skin PE isolation, plastic laminated aluminum foil, tinned cu network and halogeneous-free, flame-adverse, radiation cross-linked outer casing. Been suitable e.g. as devices connection cable for the transmission from digital signals to to a Baud rate of 10M Baud within of railway vehicle.
General features
- Conductor: flexible
- Insulation: oil resistant, gasoline resistant, halogen free
|
|
Since generations people try to build machines and plants which shall take on different functions. To raise,sink, slide, drill, transport and much more. And people attained fantastic results.
Today, we control, inform, weld, pack and transport automaticly by electric control and data cables.
These cables are necessary to ensure a frictionless fl ow of data and material. We are able to offer most of these cables: for many applications. On the following pages we present cables for the corresponding applications.
If you cant fi nd a suitable cable in our catalogue, we fabricate this special cable on request already from 100 m (see special cables on page Q) or may be we can offer you a similar cable from our stock.
HELUKABEL® with one of the biggest stocks of special and standard cables in Germany with excellent logistics wants to prove itself each day.
Stocks in: Hemmingen/Stuttgart, Neuenhagen/Berlin, Pleißa/Chemnitz, Windsbach/Nürnberg.
|
|
|
|
|
|
The Wire+Cable Division of HUBER SUHNER offers a wide range of cables for different applications and market segments. The development and production of compounds as well as the design and manufacture of wires and cables are performed in-house. Due to the large vertical range of manufacture and the high automation level combined with our vast know-how, we are able to fulfil the customer's specific requirements and needs. We also manufacture customized assemblies and complete ready-to-install cable systems.
RADOX® 125/155
RADOX® 125 is a halogen free, crosslinked compound, based on polyolefin copolymers. It has been especially developed for meeting high safety standards under adverse conditions and has good dielectric characteristics. This makes it ideally suitable as an insulation material.
Electron beam crosslinking ensures consistently good properties such as resistance to high temperature, mechanical forces, impact, abrasion and compression. Further RADOX® 125 is insensitive to environmental factors. It is used in electric machines (class B), switchboards and distribution boxes in apparatus and plant engineering.
RADOX® 155 is an electron beam crosslinked compound based on polyolefin copolymers for class F applications, used for example in the coil winding industry.
UL/CSA Approvals
RADOX® connecting leads are also available with following approvals: UL3266/CSA AWM I A/B, UL3271/CSA AWM I A/B and UL3289/ CSA CL1503.
RADOX 125/155
|
|
Monopiece cable for pushbutton boxes, controls on the ground, cable of descent
, directional cable (black external sheath yellow directional marking)
6x0.75 - 5x1.5 - 8x1.5- 12x1.5 - 15x1.5 - 18x1.5 - 20x1.5 - 25x1.5
monopiece cable without rope to consult us jusq' with 50x1.5
|
|
LEONI BU Automation & Drives provides a huge product range for drive cabling, which are summarised under the brand FieldLink® MC*. FieldLink® MC products comprise cables and cable systems for the connection of devices to a bus system, such as hydraulic pumps, linear actuators, electric motors or generally servos.
(*MC = Motion Control)
|
|
PVC and PUR control and connection cables
Control and connection cables acc. to national and international standards
TPE control cable with extra chemical resistance and UL
|
|
PVC Electronics cables
LiYY
LiYCY
LiYCY paired
PVC electronics cables, individually screened pairs
Interface cables for industrial use
UL/CSA listed PVC electronics cables
UL/CSA listed 'Low Capacitance' PVC electronics cables
|
|
DATA COMMUNICATION SYSTEMS
Lapp produces a full range of data cables for fast and secure transfers of large volumes of data. From machine electronics and bus systems to super-fast LAN data networks or highly-versatile applications: We have the data cables you need for virtually any situation.
|
|
|
Amphenol is a global provider of interconnect solutions to designers and manufacturers of internet enabling systems. Amphenol's range of offerings in electrical and optical cable, cable assembly, connector products and backplane interconnect systems span applications in PC's, servers, storage systems, optical and copper networking equipment, modems, hubs, routers, switches, media display systems, and internet appliances. With our design creativity and cost effectiveness, Amphenol leads the way in interconnect development for internet equipment, infrastructure, enterprise networks and appliances. Whether industry standard or application-specific designs are required, Amphenol provides customers with products that enable performance at the leading edge of next generation high-speed technology.
|
|
Mencom Corporation cable connectors, often referred to as circular connectors, are produced in a variety of configurations. They are available in molded cable, receptacle, or field wireable with several wire color code choices as well as multi pole choices. Mencom is the only manufacturer to number both the face and the wires on their circular connectors.
Products:
DOUBLE ENDED MDC
DOUBLE ENDED MIN
DOUBLE ENDED MIN TO MDC
SINGLE ENDED MDC
SINGLE ENDED MIN
|
|
The full range for the fieldbus infrastructure
TURCK offers all components needed to construct a complete fieldbus network, ranging from fieldbus cables through repeaters to diverse accessories. This line comprises bus and power cables, passe and active junction modules, feed-through receptacles and mounting flanges. Pre-assembled connectors and terminating resistors complement the range.
|
|
Standard for fix installation, buildings, machine equipment. High flexible for machine tool and automation equipment. HFFR (Halogen free & flame retardant). Direct burial. Harsh and aggressive environments. Marine and Submarine. Railway Systems.
General features
- Conductor: solid
- Insulation: halogen free
- Cable jacket: oil resistant, gasoline resistant
|
|
Our FieldLink® products provide cable solutions
for every type of conventional bus system:
- Industrial Ethernet
- PROFIBUS
- Foundation Fieldbus
- INTERBUS
- DeviceNet
- CAN
- EIB/KNX
- AS-Interface
- SafetyBUS p
In order to maintain defined transmission properties and to achieve the highest possible level of performance even in special applications and under very demanding conditions, we are able to provide you with a range of special cables e.g. weld splatter resistant, chemical-resistant, flame retardant, dreggable, temperature-resistant, halogen-free and also cold-resistant bus cables.
|
|
EIB/KNX is a shielded bus cable which meets the requirements of the “European Installation Bus” standard and is used for building system technology to control lighting, heating, air-conditioning, ventilation, energy management, blinds, time management, and locking systems.
The cables can be used in dry, wet or damp areas either inside or outside, but not laid in the ground.
|
|
Interbus-S cables · remote bus cables
Interbus-S cables · installation remote bus cables
CAN-Bus cables
DeviceNet™ cables
Interbus-Loop cables
Profibus-DP cables/Profibus-FMS cables
Profibus cables
SafetyBUS p cables
Hybrid field bus cables
|
|
|
|
|
|
ecofil i 5x16 mm²
Thanks to this system, installing industrial appliances can quickly be performed saving both work and time. Compared to a conventional, rigid current rail it has all the advantages of a flexible flat cable. The connecting boxes show a protection degree of IP 65 which suit industrial applications. They are fitted with compact terminal blocks which are easy to manipulate. If necessary safety cutouts can be connected to the boxes either directly at the output or separately by means of a cable.
ecofil i 7x2,5 mm²
Industrial appliances nowadays reach a high flexibility thanks to bus systems and control devices. To allow easy implementation and maintenance works, the applicances often have a modular structure which has already been determined during planning. The ecofil i 7x2.5 system perfectly suits appliances which have to be easy to modify and where power current and weak current have to be supplied in an easy and secure way. Thanks to this system, the T-pieces which are commonly liable to breakdowns and which are usually necessary for the branching of round cables can be avoided.
|
|
Flat cables in PVC and neoprene design are used as trailing cables for cranes, open fi eld conveyors and shelve service devices.
Flat cables offer the following advantages:
- Extremely small bending radius
- High flexibility
- Minimum waste of space
- Packeting possibility
|
|
ÖLFLEX® CRANE F
Weather-resistant, for harsh environmental conditions; Flat cables need less space than round cables; Considerably smaller bending radii are possible than with round cables
Application range
In crane systems on building sites and shipyards for ensuring important processes
Design
Copper wire bare or tinned
Core insulation: Rubber
Outer jacket of special rubber compound
Product features
Flame retardant according to IEC 60332-1-2
|
|
Our cables are studied to obtain, whatever the section, a stacking
optimum under the carts of garlands.
HF6 (black): for intensive uses, very weak radius of curvature. All the cables have a green/yellow driver except the cables armor-plated into 0,5 & 1 mm2.
|
|
Flat Ribbon Cable, pitch 1,27mm:
- Flat Ribbon Cable in AWG 28 with spacing 1,27mm, optionally halogen free, optionally rolled up and jacketed as round cable, with shielding and jacket
Measuring- and trailing cable:
- Flat Ribbon Cable AWG 26, eight elements, cores stranded, shielded PVC- insulated in pairs
molded conductors, multicolored:
- flexible Flat RibbonCable in 0.14mm², 0.25mm², 0.50mm², 0.75mm² with colored conductors by VDE 0812
|
|
|
|
Signal, control and data electrical cables
