|
|
Quality is the most important feature of our wide range of screw terminals. "To connect and have a free mind" is our philosophy. The whole range comprises conductor sections of 1.5 mm² up to 240 mm². All terminals are made up with clamping units of nickel-plated brass profile and screws of stainless steel. Labels are available for individual identification.
|
|
|
Ensto Clampo terminal family enables you to select the right terminal to suit your requirements.
|
|
|
|
|
|
Our cabling systems may be divided into two groups according to their field of application:
Systems for building installation:
ecobus power 5x10 mm²
The system for building automation. Both power current lines 5x2,5 mm² and bus lines 2x1,5 mm² with twin shielding are combined in one sheath. This means that the bus lines must not be interrupted any more for connecting devices - a principle, that was only used for power current lines until now. Thanks to ecobus combi, the bus installation requires a minimum of wiring works. Due to the decentralized repartition of the bus devices, the structure of the installation suits perfectly every type of requirements.
ecobus combi 5x2,5 mm² 2x1,5 mm²
ecobus power 5x2,5 mm²
ecobus data 2x1.5 mm²
multibus 4x1,5 mm²
ecoline-p3 3x2,5 mm²
Systems for industrial application:
ecofil i 5x16 mm²
ecofil i 7x2,5 mm²
Industrial appliances nowadays reach a high flexibility thanks to bus systems and control devices. To allow easy implementation and maintenance works, the applicances often have a modular structure which has already been determined during planning. The ecofil i 7x2.5 system perfectly suits appliances which have to be easy to modify and where power current and weak current have to be supplied in an easy and secure way. Thanks to this system, the T-pieces which are commonly liable to breakdowns and which are usually necessary for the branching of round cables can be avoided.
|
|
Available in various methods of wire connection, these terminal blocks are ideal for using in applications where high operating temperatures are involved.
|
|
|
|
|
|
Three product series, three connection technologies! Our DIN rail terminal block range is the right choice for any installation task, whether in control cabinets, in systems or in building installation, whether with screw, spring clamp or IDC technology.
selos - screw technology
The DIN rail terminal block with the classic screw connection: selos is solid and functional, known worldwide and in use millions of times. The variety of different products provides solutions for applications of all kinds. Screw technology guarantees highest contact forces with low contact resistance.
fasis - spring clamp technology
The DIN rail terminal blocks in spring clamp technology: fasis is easy to handle, saves time and reduces costs for wiring and warehousing, and it guarantees vibration-proof and maintenance-free clamp connections with specified contact forces. A real alternative to the screw.
taris® - IDC technology
taris® is the DIN rail terminal block for easy, quick and user-friendly wiring with insulation-piercing contacting (insulation displacing contacting, IDC technology). It is easy to handle, can be wired quickly and used safely. The wire is simply cut to length, inserted and the termination point is closed using a screwdriver. You need not strip the insulation or attach ferrules. taris® reduces the wiring time by up to 60 %.
|
|
|
RIA CONNECT manufactures high quality, competitively priced terminal blocks and terminal block connectors for the Global market. We offer pc mount screw based RIACON European style terminal blocks, spring clamp based SPRINGCON terminal blocks, tool-less insulation displacement IDCON connectors, PLUGCON headers and pin strips for pluggable terminal blocks and TUBECON tubular screw electrical terminal blocks.
|
|
The largest range from the industrial leader
For the connection of PCBs into their device environment, WAGO offers a large range of PCB terminals. For conductor diameters between 0.08 mm² and 16 mm², in metric or imperial pitches of 2.5 - 20 mm, or from 2.54 - 10.16 mm respectively, a suitable solution is found for everyone - of course in screw-free connection technology with CAGE CLAMP®, plug-in clamp or the versatile CAGE CLAMP® S connector.
|
|
Printed Circuit Board Terminal Blocks are designed for use in industrial electronics.
Solder Connection to Printed Circuit Board:
- Screw Clamp wire connection method.
- Direct soldering of pins to the PCB.
Plug In Male - Female Connection:
- Screw Clamp wire connection method.
- Pre wired female terminal block plugged.
- Soldering of Male Terminal Block pins to the PCB.
|
|
|
The IMO Standard wire protector terminal block types 100 and 500 are simple structure PCB type connectors.
|
|
Weidmüller offers an extensive range of PCB components. Please choose the relevant section to learn more about PCB connectors and PCB terminals.
|
|
|
The WAGO X-COM®-SYSTEM, a fusion of connectors and rail-mounted terminal blocks, has grown to become a building block for universal system wiring since being introduced onto the market in 1997. This system makes all current rail-mounted terminal block functionalities suitable for plug and play applications. Even components that are not mounted on a TS 35 carrier rail can be easily incorporated into existing system wiring using the X-COM-SYSTEM®.
|
|
POWER CAGE CLAMP® - The Full Range of High Current Terminal Blocks
The Range of Rail Mounted Terminal Blocks for Wire Sizes Ranging from 6 mm² to 95 mm²
Connecting conductors up to 95 mm² with a turn of the hand
They are precise and safe. They are fast and convenient. They accept all types of wires from 6 mm² to 95 mm² (AWG 4 to 4/0) - which is superior to any other comparable terminal block on the market. The three versions of the 285 Series rail-mounted terminal blocks are suitable for applications with rated currents up to 232 A. Based on a unique patented technology, the largest version has been holding its ground in the market for many years.
|
|
Winchester Electronics offers a comprehensive line of press-fit Power Terminals for backplane applications that features Winchester's proven, reliable, and industry leading C-Press compliant pin technology.
Winchester Electronics press-fit power terminals, used in wire-to-board power applications, provide a cost-effective and reliable method to connect lead wires terminated with ring or fork tongue terminals to backplanes. Power terminals have a DIP (Dual In-line Package) footprint and are available in 6 or 10 positions, with or without protective insulation, and with or without 6/32, 4/40, M3, or M4 mating screws. A 10-position power terminal with two .250 inch Quick Disconnect tabs is also available.
- 121 Series .100 x .300 inch grid 10-position power terminals
- 121 Series .125 x .250 inch grid 6-position power terminals
|
|
Screw-clamp feed-through terminal blocks, CBC Series, polyamide insulating body, UL94V-0 flame behaviour, reduced overall dimension, cross-connections (PTC) by ?Easy bridge? patented system, with no need of additional protection.
To be mounted onto TH35 - 7.5; TH35 ? 15 type rail, according to IEC 60715.
|
|
SCREW TYPE TERMINAL BLOCKS ( AVK )
AVK type screw terminals are manufactured from thermoplastic raw material.Grey as being the main colour , 6 different colours give users chance for grouping.
DIFFERENT TYPES OF SCREW TERMINAL BLOCKS ARE AS BELOW;
Standard Feed Through Terminals
Multi Level Terminals
Fuse Terminals
Fuse and Disconnect Terminals
Test and Disconnect Terminals
One-input-two-output Terminals
High Current Terminals
Distribution Terminals
Sensor Terminals
|
|
RIA CONNECT’s RIACON product series consists of pluggable and solderable screw type terminal blocks.The terminal bodies are made of copper alloy - RIA does not use wrapped terminal bodies. The surface is electro-nickel plated. Versions with soldering pins are initially electro-nickel-plated, and then hot-dip galvanized to achieve high resistance to corrosion and outstanding soldering properties.
All terminal bodies are captive in their moldings.
Terminal screws sizes M2, M3 and M3.5 are made of different materials, varied upon needs. The bottom surfaces are rounded off, permitting leads to be connected without wire protectors.
All screws are hot-dip galvanized, 4 µm nickel plating over 8 µm copper to provide a better protection against corrosion. The screws are usually secured in a fashion as to prevent them from working loose during shipment.
|
|
Differents kinds and possibles uses:
- Single Level
- Multiple Connection
- Double Level
- Triple Level
- Distribution Blocks
- Micro
- Modular Panel Mount
- Single Level Fuse
- Double Level Fuse
- Disconnect & Test
- Thermocouple
- Earthing
- Neutral/Earth Clamp
- Corrosive/Explosive Env.
|
|
|
For all cable-to-board connections relevant to maintainance, large variety of types. Lead sections up to 4.0 mm². For signal and load currents up to 15 A, pitch 3.5 mm, 3.81 mm, 5.0 mm, 5.08 mm, 7.5 mm and 10.0 mm (.138", .150", .197", .200", .295" and .394").
|
|
Heyco® Standard Appliance
Terminal Blocks
Screw to Screw
Features
Allows standardization of the SOLID WIRE Cordset. Input and output wires are always secured with a screw.
Modern low profile design occupies less "real estate" inside the appliance.
No exposed metal parts. "Dead front" designed safety.
Pressure clamp connectors are supplied in the open position, ready to accept single or multiple solid conductors.
To meet European requirements, your application may need a terminal block between the power supply cord and internal electricals.
All sizes are rated at 300 volts (450 volts in Europe).
Metal parts feature galvanized steel screws and Ni or tin plated brass inserts.
Available in 94V-0 flame retardant (FR), glass-filled 6/6 Nylon material.
Material Temperature Index: 284°F (140°C), except TB 3B- 338°F (170°C).
Consult Heyco for other pole configurations.
|
|
Optimum contact ensured through the patented and renowned clamping yoke system which is based on the classical increase of force of the screw. Requring only small effort, the screw thread produces high contact power.
A high contact force is only effective when continuously excerted on the conductor. The Weidmüller clamping yoke system works as follows: When the clamping screw is tightened, the resultant force causes the upper thread overlap to spring open, thus causing a locking action to be exerted on the screw. Movement of the connected conductor is compensated by the elastic behaviour of the clamping yoke.
Result:
The connection is vibration-resistant and makes retightening of the clamping screw unnecessary.
|
|
Spring-clamp feed-through terminal blocks, polyamide insulating body, UL94V-0 flame behaviour.
To be mounted onto TH35 - 7.5; TH35 ? 15 type rail, according to IEC 60715.
Double possibility to insert the multi-pole ?easy bridge? system PTC type jumpers.
Available for (Ex)i ?intrinsic safety? circuits
(RAL 5015 blue colour).
|
|
SPRING TYPE TERMINAL BLOCK
Spring clamp terminals provide a realistic alternative to terminal blocks with screw clamp connection in many fields of application.The spring clamp is operated by using a screw driver to provide an access to wire through the opening in the spring clamp.The wire end gets clamped on to the current bar on removal of screw driver.
YBK type spring clamp terminals decrease the mounting and revision costs relative to screw type terminals.
Interlocking mechanism on the plastic housing prevents terminal blocks to be separated from each other when the cables are connected.
TYPES OF DIFFERENT SPRING TERMINAL BLOCKS AVAILABLE ARE AS BELOW:
Standard feed-through terminals
Multi-Layer Terminals
Fuse terminals
Mini terminals
Terminals for sensors
Terminals for PCB Connection
One-in-Two-out
Two-in-two-out
|
|
|
|
|
|
RIA CONNECT’s SPRINGCON product series consists of terminal blocks using spring clamp technology.
Spring clamp technology is defined as an electrical connection produced by terminating an individual, stripped conductor with a spring.
It is valid for solid, stranded and fine stranded copper conductors having a nominal cross section from
0.08 - 2.5 mm² .
SPRINGCON terminal block features:
Tool-less operation - Insert conductor and snap the lever down to connect
Ship wire ready for your application
Tool-less operation - Insert conductor and snap the lever down to connect
Gas tight connection - A correct contact force ensures a gastight connection
Broad range of centerlines in one piece & pluggable versions - 3.5mm, 3.81mm, 5.0mm, 5.08mm, 7.62mm & 10.0mm centerlines
Fast field terminations - Cut installation time in half using SPRINGCON
Mates with industry standard PC headers already in your application
Meets or exceeds UL1059 terminal block requirements
Modular design allows for color coded sections to be easily integrated
|
|
Differents kinds and possibles uses:
- 1-in 1-Out
- Multiple Connection
- Grounding
- Panel Mount
- Angular feed through
- Anguler Earthing
- Double Level
|
|
Z-series tension clamp terminal blocks with a cross-section between 0.13 and 35 mm2 enable optimized and application proof solutions.
Terminals with tension clamp technology, the Z sereis, are made to suit a wide range of customer applications. They are:
small structural dimensions
large marking surface
integrated test point
cross-connestion ability within the Z series and to other Weidmüller families
The terminals in the Z series have a wide clamping range and up to two cross-connection channels.
The potential can be distributed across any number of channels using the pluggable cross-connections system.
|
|
|
Interpower terminal blocks described in this section are intended specifically for use in making the internal connection between the power cord and the primary circuitry of the equipment. Three-contact terminal blocks provide connection points in single-phase applications with terminals for line, neutral, and ground. Five-contact terminal blocks are used in three-phase applications with terminals for three lines, neutral or common, and ground.
|
|
Screw-clamp feed-through terminal blocks, polyamide insulating body, UL94V-0 flame behaviour, to be mounted onto PR/DIN and PR/3 type rails according to IEC 60715.
Available in standard beige (RAL 1001)
colour or version suited to be used in (Ex)i
?intrinsic safety? circuits (RAL 5015 blue
colour).
Available for conductors? rated cross sections between 2,5 sq mm to 70 sq mm, current from 24A up to 192A.
|
|
Clips from C.S.
Clips mammoth
Clips with portafusibile
Clips for transformers
LOGON:
_ screw-screw
_ screw motivating force
|
|
PRACTICAL SPRING TYPE TERMINAL BLOCKS
Practicle Spring Type Terminal Blocks.
New technology push-in terminal blocks.
Cable pushed-in without using a screwdriver.
Very high cable resistance against pull-out.
Standard feed-through terminals.
Multi-Layer Terminals.
Fuse terminals.
|
|
|
|
Terminal blocks 
